LD SYSTEMS BP POCKET 2 ΘΗΚΗ ΓΙΑ ΑΣΥΡΜΑΤΟ ΠΟΜΠΟ ΠΕΤΟΥ (BELT BAG)

Bodypack Transmitter Pouch with Transparent Window

 Model Description:
In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Receivers and P4M Personal Monitor Mixer, P4T Transmitter

Model Details:
The Model PS40E is a In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Recievers and P4M Personal Monitor Mixer, P4T Transmitter.

Specifications:

• Power : 220 VAC

Εξωτερικής-εσωτερικής χρήσης ενεργή κατευθυντική κεραία με γωνία κάλυψης 70° για καλώδια κεραιάς εως 200m μήκος. Αδιάβροχη με BNC έξοδο.

AKG SRA2B main features include:

• Remote powering option
• Water-resistant case, BNC output Status LED
• Optional laser positioning pointer
• Carrier frequency range: 650 to 870 MHz
• Antenna gain: 6 dB
• Coverage angle: 70°
• Booster gain: 17 dB
• Dimensions: 230 x 240 x 26 mm (9.0 x 9.4 x 1.0 in.)
• Weight: 250 g (8.8 oz.)

Carrier frequency range: 650 to 870 MHz
Total gain (antenna + internal amplifier): 17 dB
RF input: 1 BNC socket, 50 ohms
RF output: 1 BNC socket, 50 ohms
Operating voltage: 8 VDC from PS 4000 or ASU 4000 via connecting cable
Dimensions: 110 x 35 mm (4.3 x 1.4 in.)
Weight: 100 g (3.5 oz.)

• For indoor or outdoor use, specifically, for near- field antenna setups with no preferred direction
• Integrated high-performance antenna booster for use with antenna cables up to 180 m (600 feet) long (RG 213, in conjunction with 2 x AB 4000)
• Remote powering option
• Rugged, water-resistant case, BNC output
• Status LED

Specifications WS1000R

• Frequency Range: 790.850 MHz - 813.800 MHz
• Switching bandwith: 0.025 MHz
• No. of channels: 160 (10 groups of 16 CHN)
• Sensitivity: -94 dBm for 30 dB SINAD, typical
• Image Rejection: >60 dB
• S/N Ratio: >105 dB (A)
• T.H.D
• Audio Output Level XLR connector: -12 dBV
• 1/4inch connector: -18 dBv
• Audio Response: 60 Hz - 16 kHz
• Dynamic Range: >95 dB A-weighted
• Dimensions (W x H x D): 212 mm x 45 mm x 160 mm
• Power Requirements: 12-18 V dc at 400mA

The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for the Sennheiser ASP 2 passive antenna splitter.

The ASP 2 also powers up to 4 x EM100 / 300 / 500 G2 radio mic receivers and 2 x AB 2 active mast head amplifiers 240 volt A.C. input. (UK 3 pin). The ASP 2 with NT1-UK combination helps reduce Antenna and PSU requirements in a multi receiver system.

Sennheiser NT1-UK Features:

• 12 volt D.C. regulated output, centre pin polarised positive
• 1.5 amp current rating

The Sennheiser NT1-UK power adaptor supplies 12v D.C. regulated power for Sennheiser ASP 2 passive antenna splitter.