| Content |
Use's manual [3,48 MB]
Battery disposal information [77,1 KB]
|
|
| | LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set
The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!
Specifications MEI ONE Transmitter:
- Fixed Frequencies:
- LDMEIONE1T: 863.700 MHz
- LDMEIONE2T: 864.100 MHz
- LDMEIONE3T: 864.900 MHz
- RF output power: 10 dBm
- Gain adjustment range: + 40 dB
- Max. audio input level: + 6 dBV
- Front panel controls: Power On / Off, Headphones Level
- Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
- Input: 2 x XLR / 6.3 mm Jack (combo)
- Power requirement: 12 - 18 V DC, 300 mA External Power Supply
- Operating temperature: -10°C to +50°C
- Dimensions (W x H x D): 212 x 38 x 96 mm
|
| Γενικά χαρακτηριστικά
- Ψηφιακό ασύρματο σύστημα πομπού - δέκτη μικροφώνου
- Λειτουργεία χωρίς μπαταρία ή τροφοδοσία ρεύματος
- Για χρήση με δυναμικά μικρόφωνα αλλά και μουσικά όργανα μέσω DI
- Με ενσωματωμένη επαναφορτιζόμενη μπαταρία λιθίου
- Εύρος μέχρι 20 m / 70 ft κάτω από τις κατάλληλες συνθήκες
- Εύρος ζώνης συχνοτήτων: 20 Hz - 20 kHz
- Latency: <5 ms
- Επιλογέας 6 καναλιών
- Μετατροπέας A / D 24 bit / 48 kHz
- 2.4 GHz παγκόσμια ζώνη συχνοτήτων ISM
- 110 dB Δυναμικό εύρος
- Αναλογία (ratio) σήματος/θορύβου: 110 dB
- Διάρκεια ζωής της μπαταρίας ανά φόρτιση: εως 5 ώρες
- Κουμπί ενεργοποίησης στο πομπό
- Διακόπτης λειτουργίας στον δέκτη
- Κουμπί Mic / Line στο πομπό
- Κουμπί κλήσης καναλιού (Channel dial button)
- Περίβλημα από ABS
- Θύρα φόρτισης Micro USB
- Βάρος ανά μονάδα: 95 g
Περιεχόμενα συσκευασίας:
- Δέκτης με αρσενικό XLR
- Πομπός με θηλυκό XLR
- Καλώδιο φόρτισης USB
Σημείωση: δεν παρέχει phantom power |
Description
The PROCAB TST200 Cable Tester comes with all audio and electronics industry standard inputs, such as XLR Male/Female (3-pin/5-pin), 3.5 mm jack, 6.3 mm jack, DIN (3-pin/5-pin), RCA, Speaker (4-pin), RJ45, RJ11, BNC. The unit has separate 'Sender' and 'Receiver' units, which are able to be locked together for ease of transport, or split apart for testing cables at either end of a signal chain.
Simply plug in either end of an audio cable into the "A" and "B" side of the device, then select your mode to check signal continuity across all active pins or conductors. The brightly coloured LED's will light up indicating signal continuity and which pins are connected together. The inbuilt speaker of the TST200 also beeps when a successful connection is made between the Sender and Receiver units. If not all connections are made, no beep will sound, and the faulty connection's LED will not be lit.
Thanks to the split unit design means you can test both cables you have on hand, as well as longer cables that are already set up. This time saving feature removes the hassle of packing down your cables just for testing. The sender unit (B) includes a switch to select the speed in which the connections are tested, as well as the power switch.
This two-part cable tester is reliable and durable, whether it be on the road or in the studio. Both the A and B units are powered separately, and each side requires 9V battery power.
Product features
| Dimensions |
165 x 168 x 45 mm (W x H x D) |
| Construction |
Plastic |
| Application |
AV & IT |
|
Rental & MI |
| Series |
Bulk & Accessories |
|
Battery disposal information [77,1 KB]
Frequenzy List [246,1 KB]
LD Systems MEI100G2
The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 80 Hz - 15 kHz ± 3 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 8,5 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, mono/stereo, AF level (left/right)
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 212 mm
- Height: 38 mm
- Depth: 90 mm
- Accessories (included): Antenna, power supply, headphones
|
Audio-Technica MCB4 Antenna Combiner allows the signals of up to four M3 Wireless In-Ear Monitor stereo transmitters to be combined onto a single transmitting antenna, reducing rack clutter.
A wide-band unit that operates over the 440-865 MHz range, the MCB4 is designed to complement Audio-Technica M3 Wireless In-Ear Monitor Systems. It is also suitable for many other in-ear wireless systems (with external BNC antenna connections) operating within the 440 to 865 MHz range. The MCB4 provides one output and four isolated transmitter inputs. All RF connectors are BNC-type.
Four jacks on the rear panel (controlled by the unit's power switch) provide 12V DC (centre positive) to power as many as four transmitters operating on 12 volts at up to 600 mA each. Included with the unit are four DC cables appropriate for use with M3T (or like-powered) transmitters. The 12-volt supplies for powering transmitters are short-circuit protected. The unit features all-metal construction for extreme durability and protection from radio frequency interference.
- Broadband UHF operation (440-865 MHz range)
- Combines the signals of up to four wireless in-ear monitor transmitters into one antenna
- Centralized power supply with ability to power four individual transmitters
- Maintains clean signals with low distortion
- Includes hardware for front-mounting the antenna for improved performance
- Includes adapters to allow the unit to be mounted into a single rack space
- Description: 4-Way Active Combiner
- Bandwidth: 440–865 MHz
- VSWR:
- System Gain (per channel): 0dB Typical (within specified bandwidth)
- Impedance: 50 ohms, typical (within specified bandwidth)
- Termination Type: BNC Female (5 total)
- Maximum RF Input Power: +20 dBm or 100 mW
- Third Order Intercept Point: Greater than 25 dBm
- Weight: 1.0 kg (2.2 lbs.)
- Dimensions: 210 mm (8.27“) W x 176 mm
(Base unit only) (6.93“) D x 46 mm (1.80“) H - Power Supply: Desktop Switching Power Supply
Rated at 5A @ 12VDC or 60 Watts
Input Voltage 100-240VAC via detachable IEC 320/C14 cable
Output is provided on an overmolded 3-pin Molex style termination - Accessories: IEC 320/C14 power cable (for power supply); 5 - 22" RF (BNC to BNC) cables; 4 – DC power cables; Rack kit for front-mounting antennas and adaptation to a 19" rack
- Transmitter power (optional): 600mA @ 12VDC – 4 outputs
|
- Αντικαταστήστε το καλώδιο HDMI σε μια αίθουσα συσκέψεων με μια ασύρματη σύνδεση μεταξύ ενός φορητού υπολογιστή και μιας οθόνης ή ενός προβολέα.
- Plug & play: δεν απαιτείται εφαρμογή ή λογισμικό.
- Δεν χρειάζεται να συνδεθείτε σε δίκτυο (Wi-Fi).
- Υποστηρίζει αναλύσεις βίντεο έως και Full HD 1080p/60Hz.
- Συνδέστε τον δέκτη HDMI στην είσοδο HDMI της οθόνης ή του βιντεοπροβολέα σας και τροφοδοτήστε τον μέσω θύρας USB.
- Συνδέστε τον πομπό HDMI στην έξοδο HDMI ή στη θύρα USB-C του φορητού σας υπολογιστή, MacBook ή Chromebook χωρίς τη χρήση πρόσθετου καλωδίου τροφοδοσίας.
- Μετατρέψτε τον υπολογιστή ή το φορητό σας υπολογιστή σε κέντρο πολυμέσων και μοιραστείτε περιεχόμενο ασύρματα σε μια οθόνη τοποθετημένη σε βάση δαπέδου ή σε επιτοίχια βάση.
Video/audio
|
|
| Video resolution |
1080p@60Hz |
| PC resolution |
Max. 1920 x 1080 |
| HDMI standard |
HDMI 1.4 / HDCP 1.3 |
| Audio formats |
PCM stereo |
Technology
|
|
| Operational frequency |
5 GHz |
| Operating range |
Up to 20 metres LOS (line of sight) |
| Latency (delay) |
<120 ms |
| Video compression |
H.264 |
Transmitter
|
|
| AV input |
1 x HDMI |
| USB input |
1 x micro-USB (PC, laptop) |
| Dimensions (h x w x d) |
83 x 32 x 13 mm |
| Weight |
27 grams |
General
|
|
| Ambient temperature |
0 ~ 40 °C |
| Ambient humidity |
20% ~ 90% |
| Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.