Content |
Επαγγελματικά bi-amplified nearfield monitors δύο δρόμων με kevlar woofer 5 ιντσών και tweeter μαλακού θόλου 1 ίντσας. Είσοδοι balanced και unbalanced (XLR & TRS), απόκριση συχνοτήτων 53Hz - 22kHz, κυκλώματα προστασίας και εξωτερική ασφάλεια, συχνότητα crossover 3kHz, μέγιστη δυναμική περιοχή > 100dB, ενισχυτής LF 40W, ενισχυτής HF 30W, RMS 70W, Peak 100W. Μαγνητικά θωρακισμένα
frequency response 53 Hz – 22 kHz
crossover frequency 3 kHz
low-frequency amplifier power 40 watts
high-frequency amplifier power 30 watts
maximum signal-to-noise (dynamic range) > 100 dB (typical A-weighted)
polarity positive signal at + input produce outward LF cone displacement
input impedance 20 k ohms balanced, 10 k ohms unbalanced
input sensitivity 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet vinyl-laminated MDF
size 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight 11 lbs./unit; 5 kg.
|
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Acoustical Specifications |
---|
Frequency Response -3 dB: | 40 Hz | ÷ 20 kHz | Max SPL: | 114 dB | | Horizontal coverage angle: | 110° | | Vertical coverage angle: | 70° | | Compression Driver: | 1" neo, metal dome | | Woofer: | 6.5" neo, ICC technology | |
INPUT/OUTPUT SECTION |
---|
Input connectors: | combo XLR/Jack | | Input sensitivity: | -6/+6 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1900 Hz | | Protections: | thermal, excurs., rms | | Limiter: | soft limiter | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
AMPLIFIER SPECIFICATIONS |
---|
High frequencies: | 100 Watts | | Low frequencies: | 200 Watts | | Cooling: | convection | | Connections: | vde | |
CABINET |
---|
Cabinet Material: | die cast aluminum | | Hardware: | orientation adjustable stand | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 370/14.5 mm/inch | | Width: | 265/10.4 mm/inch | | Depth: | 250/9.8 mm/inch | | Net Weight: | 10.5/23 Kg/Lbs |
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
ADAMs A7 & A7X: the evolution of a legend
The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
Driver technology
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Mid-Woofer |
| Number | 1 | Basket Ø | 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel |
| Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors |
| Analog | XLR / RCA | General data |
| Frequency response | 42 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥106 dB | Max. peak | ≥114 dB | Crossover frequencies | 2500 Hz | Input impedance | 30 KOhm | Weight | 20.3 lb (9,2 kg) | Magnetically shielded | No | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
Μonitor 2 δρόμων-2ενισχυτών near field, woofer 5.25? SFG?, tweeter 1"
τιτανίου προσαρμοσμένο σε eos waveguide, 100WRMS για LF and
50WRMS για HF, 70Ηz?20kΗz +1/-2dΒ, >109dB SPL peak. XLR, RCA
inputs. Δυνατότητα πολλαπλών ρυθμίσεων και συνεργασία με JBL RMC
calibration kit. Μαγνητική θωράκιση. 7,7kg., (173W x 269H x 241D mm).
|
Αυτοενισχυόμενο monitor DSP μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 5" και tweeter 3/4“. Διαθέτει (Bi-Amp) δύο ενισχυτές 40W ξεχωριστούς για το woofer και το tweeter. Συνδυασμένη ψηφιακή (AES/EBU) και αναλογική είσοδος Ballanced XLR. Διακόπτης On/Off και ρυθμιστικά "Room Response Control" και έντασης. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod) και βάση επίτοιχη. Χρώμα Μαύρο ματ. Βάρος 5,6kg.
|
Mackie HR624 MK2 ενεργό monitor δύο δρόμων ιδανικά για χρήση σε studio, με εξαιρετικά γραμμική απόκριση συχνότητας. Kαμπίνα MDFμε εσωτερική αντιστήριξη.
Χαρακτηριστικά:
- 6.7" high-precision, low-distortion LF driver
- 1" titanium dome ferrofluid-cooled tweeter
- Optimized waveguide for wide, even tone
- Twin FR Series amps: 100W LF, 40W HF
- Cast aluminum Zero Edge baffle minimizes diffraction
- Internal damping eliminates midrange artifacts
- Acoustic Space Control, LF roll-off, HF shelf controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount for easy wall or ceiling placement
- THX pm3 certified for surround applications
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.