Content |
Επαγγελματικά bi-amplified nearfield monitors δύο δρόμων με kevlar woofer 5 ιντσών και tweeter μαλακού θόλου 1 ίντσας. Είσοδοι balanced και unbalanced (XLR & TRS), απόκριση συχνοτήτων 53Hz - 22kHz, κυκλώματα προστασίας και εξωτερική ασφάλεια, συχνότητα crossover 3kHz, μέγιστη δυναμική περιοχή > 100dB, ενισχυτής LF 40W, ενισχυτής HF 30W, RMS 70W, Peak 100W. Μαγνητικά θωρακισμένα
frequency response 53 Hz – 22 kHz
crossover frequency 3 kHz
low-frequency amplifier power 40 watts
high-frequency amplifier power 30 watts
maximum signal-to-noise (dynamic range) > 100 dB (typical A-weighted)
polarity positive signal at + input produce outward LF cone displacement
input impedance 20 k ohms balanced, 10 k ohms unbalanced
input sensitivity 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet vinyl-laminated MDF
size 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight 11 lbs./unit; 5 kg.
|
ΔΕΝ ΠΩΛΕΙΤΑΙ ΑΝΑ ΤΕΜΑΧΙΟ , ΤΟ ΕΝΑ ΑΠΟ ΤΑ ΔΥΟ ΠΕΡΙΕΧΟΥΝ ΕΝΙΣΧΥΤΕΣ ΤΟ ΑΛΛΟ ΕΙΝΑΙ ΠΑΘΗΤΙΚΟ
Τα ενεργά ηχεία της Reloop "ADM-5" είναι η τέλεια προσθήκη για κάθε στούντιο στο σπίτι του DJ. Kαταλληλα για χρήση με Μidi controller η με υπολογοστή. Σε αντίθεση με πολλά ηχεία που ειναι κατασκευασμένα από πλαστικό, τα ADM-5 είναι κατασκευασμένα από υψηλής ποιότητας ξύλο με αποτέλεσμα την ακριβή αναπαραγωγή μπάσσου και τον καθαρό ήχο. 'Εχουν μαγνητική θωράκιση ωστε na δυνατή τοποθέτηση των ηχείων κοντά σε υπολογιστές ή οθόνες.
Τεχνικλα χαρακτηριστικα:
Professional 2-way active DJ monitors
Output: 2 x 30 w RMS
Frequency response: 35 Hz - 20 kHz
S/N Ratio: > 75dB
Impedance: 8 ohm
Magnetically shielded bass drivers
Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter
Dimensions: 232 x 320 x 180 mm
Weight: 5.0 kg (per piece)
|
Mackie HR624 MK2 ενεργό monitor δύο δρόμων ιδανικά για χρήση σε studio, με εξαιρετικά γραμμική απόκριση συχνότητας. Kαμπίνα MDFμε εσωτερική αντιστήριξη.
Χαρακτηριστικά:
- 6.7" high-precision, low-distortion LF driver
- 1" titanium dome ferrofluid-cooled tweeter
- Optimized waveguide for wide, even tone
- Twin FR Series amps: 100W LF, 40W HF
- Cast aluminum Zero Edge baffle minimizes diffraction
- Internal damping eliminates midrange artifacts
- Acoustic Space Control, LF roll-off, HF shelf controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount for easy wall or ceiling placement
- THX pm3 certified for surround applications
| ΤΙΜΗ ΤΕΜΑΧΙΟΥ
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
Subwoofer |
|
Number |
1 / 1 |
Basket Ø |
7" (175 mm) / 7" (175 mm) |
Voice coil Ø |
1.5" (38 mm) / 1.5" (38 mm) |
Cone material |
Carbon / rohacell / glass / Carbon / rohacell / glass |
Tweeter |
|
Number |
1 |
Type |
X-ART |
Diaphragm area |
4 inch² (2420 mm²) |
Equiv. Diaphragm Ø |
2" (56 mm) |
Velocity transform ratio |
4:1 |
Diaphragm weight |
0.17 g |
Built-in Amplifiers |
|
Subwoofer |
1 |
Type |
PWM |
Amp. power RMS / music |
100 W / 150 W |
Subwoofer |
1 |
Type |
PWM |
Amp. power RMS / music |
100 W / 150 W |
Tweeter |
1 |
Type |
A/B |
Amp. power RMS / music |
50 W / 75 W |
Control panel |
|
Input Sensitivity |
-∞ to +14 dB |
High Shelf EQ > 5 kHz |
±6 dB |
Low Shelf EQ |
±6 dB |
Tweeter gain |
±4 dB |
Input connectors |
|
Analog |
XLR / RCA |
Location |
Rear |
General data |
|
Panel |
Front |
Frequency response |
38 Hz - 50 kHz |
THD 90dB/1m > 100 Hz |
≤0.5 % |
Long term output |
≥114 dB |
Max. peak |
≥122 dB |
Crossover frequencies |
400 / 3000 Hz |
Input impedance |
30 KOhm |
Weight |
28.2 lb (12,8 kg) |
Magnetically shielded |
Optional |
Height x Width x Depth |
9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) |
Warranty |
5 Years |
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
S1X
The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.
The smallest reference speaker
The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.
The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.
Woofer |
| Number | 1 | Basket Ø | 6" (156 mm) | Voice coil Ø | 1.5" (37 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 200 W / 280 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | ±10 dB | High Shelf EQ > 6 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors |
| Analog | XLR | General data |
| Panel | Rear | Frequency response | 40 Hz - 50 kHz | THD > 80 Hz | ≤1.5 % | Long term output | ≥103 dB | Max. peak | ≥113 dB | Crossover frequencies | 2200 Hz | Input impedance | 10 KOhm | Weight | 13.2 lb (6 kg) | Magnetically shielded | Optional | Height x Width x Depth | 11.5" (295 mm) x 7" (175 mm) x 10" (260 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
Αυτοενισχυόμενο monitor DSP μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 5" και tweeter 3/4“. Διαθέτει (Bi-Amp) δύο ενισχυτές 40W ξεχωριστούς για το woofer και το tweeter. Συνδυασμένη ψηφιακή (AES/EBU) και αναλογική είσοδος Ballanced XLR. Διακόπτης On/Off και ρυθμιστικά "Room Response Control" και έντασης. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod) και βάση επίτοιχη. Χρώμα Μαύρο ματ. Βάρος 5,6kg.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.