| Content |
Επαγγελματικά bi-amplified nearfield monitors δύο δρόμων με kevlar woofer 5 ιντσών και tweeter μαλακού θόλου 1 ίντσας. Είσοδοι balanced και unbalanced (XLR & TRS), απόκριση συχνοτήτων 53Hz - 22kHz, κυκλώματα προστασίας και εξωτερική ασφάλεια, συχνότητα crossover 3kHz, μέγιστη δυναμική περιοχή > 100dB, ενισχυτής LF 40W, ενισχυτής HF 30W, RMS 70W, Peak 100W. Μαγνητικά θωρακισμένα
frequency response 53 Hz – 22 kHz
crossover frequency 3 kHz
low-frequency amplifier power 40 watts
high-frequency amplifier power 30 watts
maximum signal-to-noise (dynamic range) > 100 dB (typical A-weighted)
polarity positive signal at + input produce outward LF cone displacement
input impedance 20 k ohms balanced, 10 k ohms unbalanced
input sensitivity 85 mV pink noise input produces 90 dBA output SPL at one meter with volume control at maximum
power factory programmed for either 115V ~50/60 Hz or 230V ~50/60 Hz
protection RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
cabinet vinyl-laminated MDF
size 7.7” x 7” x 10”; 19.5cm x 17.6cm x 25.2cm
weight 11 lbs./unit; 5 kg.
|
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 40 Hz | ÷ 20 kHz | | Max SPL: | 114 dB | | | Horizontal coverage angle: | 110° | | | Vertical coverage angle: | 70° | | | Compression Driver: | 1" neo, metal dome | | | Woofer: | 6.5" neo, ICC technology | |
| INPUT/OUTPUT SECTION |
|---|
| Input connectors: | combo XLR/Jack | | | Input sensitivity: | -6/+6 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1900 Hz | | | Protections: | thermal, excurs., rms | | | Limiter: | soft limiter | | | Controls: | bass tilt, roll-off, treeble tilt, desktop, DSP controlled | |
| AMPLIFIER SPECIFICATIONS |
|---|
| High frequencies: | 100 Watts | | | Low frequencies: | 200 Watts | | | Cooling: | convection | | | Connections: | vde | |
| CABINET |
|---|
| Cabinet Material: | die cast aluminum | | | Hardware: | orientation adjustable stand | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 370/14.5 mm/inch | | | Width: | 265/10.4 mm/inch | | | Depth: | 250/9.8 mm/inch | | | Net Weight: | 10.5/23 Kg/Lbs |
|
Αυτοενισχυόμενο monitor DSP μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 5" και tweeter 3/4“. Διαθέτει (Bi-Amp) δύο ενισχυτές 40W ξεχωριστούς για το woofer και το tweeter. Συνδυασμένη ψηφιακή (AES/EBU) και αναλογική είσοδος Ballanced XLR. Διακόπτης On/Off και ρυθμιστικά "Room Response Control" και έντασης. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod) και βάση επίτοιχη. Χρώμα Μαύρο ματ. Βάρος 5,6kg.
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
| Woofer |
| | Number | 1 | | Basket Ø | 9" (228 mm) | | Voice coil Ø | 2" (50 mm) | | Cone material | HexaCone | | Midrange |
| | Number | 1 | | Basket Ø | 4.5" (116 mm) | | Voice coil Ø | 1" (25 mm) | | Cone material | HexaCone | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Midrange | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 100 W | | Control panel |
| | Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | | EQ 80 Hz | 0 to +6 dB (1 dB steps) | | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | | Low Shelf EQ | ±4 dB (1 dB steps) | | Tweeter gain | ±2 dB (0.5 dB steps) | | Input connectors |
| | Analog | XLR | | Digital (optional) | AES/EBU / SPDIF / word clock | | General data |
| | Panel | Front | | Frequency response | 32 Hz - 50 kHz | | THD > 80 Hz | ≤0.6 % | | Long term output | ≥114 dB | | Max. peak | ≥124 dB | | Crossover frequencies | 350 / 2800 Hz | | Input impedance | 10 KOhm | | Weight | 34 lb (15,4 kg) | | Magnetically shielded | Optional | | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
S1X
The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.
The smallest reference speaker
The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.
The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.
| Woofer |
| | Number | 1 | | Basket Ø | 6" (156 mm) | | Voice coil Ø | 1.5" (37 mm) | | Cone material | HexaCone | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 200 W / 280 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 100 W | | Control panel |
| | Input Sensitivity (coarse) | ±10 dB | | High Shelf EQ > 6 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR | | General data |
| | Panel | Rear | | Frequency response | 40 Hz - 50 kHz | | THD > 80 Hz | ≤1.5 % | | Long term output | ≥103 dB | | Max. peak | ≥113 dB | | Crossover frequencies | 2200 Hz | | Input impedance | 10 KOhm | | Weight | 13.2 lb (6 kg) | | Magnetically shielded | Optional | | Height x Width x Depth | 11.5" (295 mm) x 7" (175 mm) x 10" (260 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
| Χαρακτηριστικά της σειράς D3
> Σχεδίαση με δύο ενισχυτές για δυναμικό και ακριβή ήχο,
> Ειδικά σχεδιασμένος οδηγός στα tweeter, για καλύτερη στερεοφωνική εικόνα,
> Σύστημα 'Acoustic Space Control', για προσαρμογή των χαμηλών συχνοτήτων στον κάθε χώρο,
> Βελτιωμένο σύστημα Bass Reflex, για εκτεταμένη απόκριση χαμηλών συχνοτήτων,
> Είσοδοι XLR balanced και 1/4” balanced/unbalanced, για εύκολη σύνδεση με audio interfaces,mixers, synthesizers, DJ gear
>Έλεγχος στάθμης ακρόασης,
>Φωτεινή ένδειξη LED στο εμπρός μέρος, που γίνεται πιό έντονη όταν το ηχείο τοποθετείται στη σωστή γωνία ακρόασης.
Χαρακτηριστικά BX8
> Συνολική ισχύς 150 watts (80 watts για woofer, 70 watts για tweeter),
> Woofer 8 ιντσών από Kevlar,
> Tweeter θόλου 1.25 ιντσών (από φυσικό μετάξι) με εξαιρετική λεπτομέρεια στον ήχο,
> Απόκριση συχνότητας: 37Hz - 22kHz.
Η τιμή αφορά σε τεμάχιο |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.