MONITOR AUDIO RADIUS 380 ΥΠΟΓΟΥΦΕΡ

• 18mm MDF cabinet construction with internal bracing
• Cool-running 200W Class D amplifier with switch mode power supply (SMPSU)
• Twin side-firing 8” C-CAM® drivers - one active and one passive ABR
• Low pass filter switch – for LFE or Stereo input selection
• Power switch with ON – Auto- Off/ trigger settings
• Stereo/ LFE RCA inputs
• 3 x Pre-set EQ settings – Music/Movie/Impact

System Format

Active sub-woofer system – Auxiliary (ABR) loading. 18mm MDF cabinet

Low Frequency Limit

30Hz (- 6dB)

Upper Frequency Limit

Variable 40 – 120 Hz @ 24dB/Octave

Amplifier Power Output

200 Watts @ 1% THD+N

Amplifier Classification

Class D amplifier with Switch mode power supply (SMPSU)

Bass EQ Switch

Music / Movie / Impact

Phase Control

0 & 180 degrees

Auto Sensing

Line Level >3.5mV

Input Level Requirements

Standby after approximately 15 minutes if no signal sensed

Driver Compliment

1 x 8” (200mm) C-CAM® long throw driver 1 x 8” (200mm) Auxiliary bass radiator

Input Impedance

> 20K Ohms

Mains Input Voltage

AC 110 - 120 V ~ 50/60Hz;  AC 220 - 240 V ~ 50/60Hz  (Factory Region Preset)

Dimensions including amp & feet (HxWxD)

308 x 290 x 305mm
(121/8 x 117/16 x 12 Inches)

Connections

Stereo RCA in, LFE in, 12v Trigger in  (3.5mm mono mini-jack)

12v Trigger Input

5 - 12v via 3.5mm mono mini-jack socket

Power Consumption

200 Watts / 0.5 Watts in Standby  (ErP approved)

Weight (Unpacked)

10.16Kg (22lb 6oz)

Amplifier Output:    500 Watts (RMS) 1000 Watts (Peak)
Low Frequency Limit    27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit    40 - 120Hz Variable
Variable Low Pass Filter Alignment    Active 4th order 24dB/octave (two-stage filter)
Cabinet Specification:    Sealed Cabinet with 25mm M.D.F construction and internal bracing.
Amplifier Classification:    Class-D amplifier
Driver Compliment:    1 x 12" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw voice coil.
Dimensions:
(H x W x D)    340 x 340 x 410 mm
(13 3/8 x 13 3/8 x 16 1/8 inch)
Weight: (unpacked)    22.56Kg (49.63lbs)
Mains Input Voltage:    100 - 120 Vac, 220 - 240 Vac, 50/60Hz
Input Impedance    20Kohms

 User's Manual

 ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Ενεργό Subwoofer 12ʼʼ με ενισχυτή ισχύος 165WRMS/275WPeak, πηνίο 2ʼʼ, Ρύθμιση
έντασης, ενεργό ρυθμιζόμενο crossover 50-200 Hz, Ρύθμιση φάσεως 0°-180°,
Eίσοδοι RCA Line Level, LFE & Speaker Level inputs, έξοδοι Stereo, left and right, speaker
level, απόκριση συχνότητας 29-140Hz +/-3dB, Σύστημα auto ON/OFF,
Μαγνητικά θωρακισμένο, χρώμα black ash,
Διαστάσεις (H/W/D): 39cm x 36cm x 48cm, Βάρος 17.2kgr

Impact Series: High Performance, High Value Subwoofers

The down-firing port on the Impact-12 gives more bass output with less distortion than similarly priced subwoofer from other companies. With its 275 watts of amplifier focused on the 29 Hz to 140 Hz frequencies, you get a ton of bass for you dollar. You can blend the Impact-12 with your satellite speakers using the adjustable low pass crossover frequency feature. All this great sound is wrapped up in an attractive black ash wood grain colored cabinet with black gloss trim.

Features

• Compact, stylish cabinet; high-value subwoofer
• High quality, long throw drivers
• 12" forward firing coated fiber woofer
• Down-firing port minimizes distortion
• 2" copper-wound voice coils for exceptional reliability
• “Green” MDP amp rated at 275 watts Dynamic power

A subwoofer designed specifically to shine alongside the rest of the BMR-driven Aero speakers, it adds phenomenal amounts of depth and power to your music and movies.

Features

        500W power
        10" front-firing subwoofer driver
        10" down-firing ABR (Auxiliary Bass Radiator)
        Premium construction

Rated output power    500W
Frequency response    21Hz - 200Hz
Drivers    1 x 10" (250mm) front-firing subwoofer
1 x 10" (250mm) down-firing ABR
Crossover    Active - variable 40Hz - 200Hz
Colour    Black
Dimensions (WxHxD)    330 x 340 x 355mm (13.0 x 13.4 x 14.0“)
Weight    11.7kg (25.8lbs) each

The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality

 Features

        Rigid MDF cabinet
        70W RMS amplifier
        8-inch long-throw woofer
        Individual controls to tailor volume, crossover frequency and phase adjustment

Sensitivity    180mV for full power output
Frequency response    34Hz - 150Hz
Rated output power    70W
Drive units    1 x 8" (203mm) long throw woofer
Crossover    50 - 150Hz continuous/active
Max. power consumption    100W
Colour    Black
Dimensions (WxHxD)    300 x 300 x 310mm (11.8 x 11.8 x 12.2“)
Weight    7.7kg (17lbs)

Product Series     Subwoofers
Speaker Type     Subwoofer
Frequency Range (+/-3 dB) [Hz]     28 - 190
Maximum SPL [dB]     112
Crossover Frequency [Hz]     40 - 120 Hz
Low Frequency Driver     1 x 12" long stroke  Polymere Aluminimum
Enclosure Type     Bass Reflex
Bass Reflex Tuning Frequency [Hz]     36.0
Max. Amplifier Power Output [RMS watt]     220
Continous IEC Power Output [RMS watt]     170
Input Impedance [Ω]     25K
Connection input(s)     Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding     No
Recommended Placement     Floor
Near wall or corner
Recommended Distance From Wall [cm]     > 5
Functions     Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W]     250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm]     370 x 340 x 380
Weight [kg]     14.7
Accessories Included     Manual
Rubber Bumpers
Spikes M6
Finish     Black Ash Vinyl
Light Walnut Vinyl
White Vinyl