MONITOR AUDIO RADIUS 380 ΥΠΟΓΟΥΦΕΡ

• 18mm MDF cabinet construction with internal bracing
• Cool-running 200W Class D amplifier with switch mode power supply (SMPSU)
• Twin side-firing 8” C-CAM® drivers - one active and one passive ABR
• Low pass filter switch – for LFE or Stereo input selection
• Power switch with ON – Auto- Off/ trigger settings
• Stereo/ LFE RCA inputs
• 3 x Pre-set EQ settings – Music/Movie/Impact

System Format

Active sub-woofer system – Auxiliary (ABR) loading. 18mm MDF cabinet

Low Frequency Limit

30Hz (- 6dB)

Upper Frequency Limit

Variable 40 – 120 Hz @ 24dB/Octave

Amplifier Power Output

200 Watts @ 1% THD+N

Amplifier Classification

Class D amplifier with Switch mode power supply (SMPSU)

Bass EQ Switch

Music / Movie / Impact

Phase Control

0 & 180 degrees

Auto Sensing

Line Level >3.5mV

Input Level Requirements

Standby after approximately 15 minutes if no signal sensed

Driver Compliment

1 x 8” (200mm) C-CAM® long throw driver 1 x 8” (200mm) Auxiliary bass radiator

Input Impedance

> 20K Ohms

Mains Input Voltage

AC 110 - 120 V ~ 50/60Hz;  AC 220 - 240 V ~ 50/60Hz  (Factory Region Preset)

Dimensions including amp & feet (HxWxD)

308 x 290 x 305mm
(121/8 x 117/16 x 12 Inches)

Connections

Stereo RCA in, LFE in, 12v Trigger in  (3.5mm mono mini-jack)

12v Trigger Input

5 - 12v via 3.5mm mono mini-jack socket

Power Consumption

200 Watts / 0.5 Watts in Standby  (ErP approved)

Weight (Unpacked)

10.16Kg (22lb 6oz)

Ενεργό υπογούφερ κλειστού τύπου. Μεγάφωνο
μεγάλης διαδρομής 250mm Paper/Kevlar.
Ψηφιακός ενισχυτής ICE power 500 Watt.
Είσοδοι σήματος LINE και ηχείων, 12V trigger.

Amplifier Output:    1000 watts (RMS) 2000 watts (Peak)
Frequency Response:    16Hz to 40/160Hz variable
Crossover (Low Pass):     40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass):    16Hz - 31Hz
EQ:    4 x Presets 1 x User Setting
Equalisation:    Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level:     -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements:     Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control:    0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory:    3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth:    Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight:    50 Kg (110lbs)
Mains input Voltage:    100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

 User's Manual

ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ

Type     Advanced YST II and QD-Bass Subwoofer
Driver     25cm(10'') cone
Dynamic Power     250 W
Frequency Response     20-160 Hz
Advanced YST     Advanced YST II
QD-Bass Technology     Front-firing
High-Efficiency Power Amplifier     Yes
Linear Port     Yes
BASS (Bass Action Selector System)     Yes
Standby Power Consumption     0.3 W
Dimensions (W x H x D)     380 x 368 x 420 mm
Weight     18.5 kg

The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality

 Features

        Rigid MDF cabinet
        70W RMS amplifier
        8-inch long-throw woofer
        Individual controls to tailor volume, crossover frequency and phase adjustment

Sensitivity    180mV for full power output
Frequency response    34Hz - 150Hz
Rated output power    70W
Drive units    1 x 8" (203mm) long throw woofer
Crossover    50 - 150Hz continuous/active
Max. power consumption    100W
Colour    Black
Dimensions (WxHxD)    300 x 300 x 310mm (11.8 x 11.8 x 12.2“)
Weight    7.7kg (17lbs)

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122