| Content |
Αυτοενισχυόμενο ηχείο studio monitor, δύο δρόμων bi-amp, με bass reflex. Διαθέτει woofer 5 1/4'' & tweeter silk dome 1'' . Απόκριση συχνότητας 48 Hz 22KHz, ισχύος 45W/LF και 35W/H.F. Διαθέτει δύο εισόδους balanced XLR & Jack, ρυθμιστικά τονικότητας και εντάσεως. Βάρος : 5,9Kg
Διαθέσιμο σε : Μαύρο Κόκκινο Κίτρινο / Τιμή τεμαχίου
Product details
Woofer: 5 1/4-inch magnetically shielded polypropylene membrane
Tweeter: 1-inch silk dome tweeter
Frequency response: 48Hz - 22kHz
HF - Level: -6dB ~ +6 dB variable at 10Khz
LF - Level: -6dB ~ +6 dB variable at 100hz
Crossover frequency: 3kHz
LF - Amplifier Power: 45W
HF - Amplifier Power: 35W
Signal HF / LF: 90dB / 95dB
THD + N @ Rated Power HF / LF: 0.05% / 0.02%
Inputs: XLR Connector, TRS Connector, RCA input
Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity: +4 dBu (Balanced), -10dBV (unbalanced)
Available colors: Red, Black
Net weight: 5.9 kg / 13.1lb
Net Dimensions: L215 x W190 x H277 mm
L8.44 x W7.48 x H10.91 in
| ΤΙΜΗ ΤΕΜΑΧΙΟΥ
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
| Subwoofer |
|
| Number |
1 / 1 |
| Basket Ø |
7" (175 mm) / 7" (175 mm) |
| Voice coil Ø |
1.5" (38 mm) / 1.5" (38 mm) |
| Cone material |
Carbon / rohacell / glass / Carbon / rohacell / glass |
| Tweeter |
|
| Number |
1 |
| Type |
X-ART |
| Diaphragm area |
4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø |
2" (56 mm) |
| Velocity transform ratio |
4:1 |
| Diaphragm weight |
0.17 g |
| Built-in Amplifiers |
|
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Subwoofer |
1 |
| Type |
PWM |
| Amp. power RMS / music |
100 W / 150 W |
| Tweeter |
1 |
| Type |
A/B |
| Amp. power RMS / music |
50 W / 75 W |
| Control panel |
|
| Input Sensitivity |
-∞ to +14 dB |
| High Shelf EQ > 5 kHz |
±6 dB |
| Low Shelf EQ |
±6 dB |
| Tweeter gain |
±4 dB |
| Input connectors |
|
| Analog |
XLR / RCA |
| Location |
Rear |
| General data |
|
| Panel |
Front |
| Frequency response |
38 Hz - 50 kHz |
| THD 90dB/1m > 100 Hz |
≤0.5 % |
| Long term output |
≥114 dB |
| Max. peak |
≥122 dB |
| Crossover frequencies |
400 / 3000 Hz |
| Input impedance |
30 KOhm |
| Weight |
28.2 lb (12,8 kg) |
| Magnetically shielded |
Optional |
| Height x Width x Depth |
9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) |
| Warranty |
5 Years |
|
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
| Woofer |
| | Number | 1 | | Basket Ø | 9" (228 mm) | | Voice coil Ø | 2" (50 mm) | | Cone material | HexaCone | | Midrange |
| | Number | 1 | | Basket Ø | 4.5" (116 mm) | | Voice coil Ø | 1" (25 mm) | | Cone material | HexaCone | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Midrange | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 100 W | | Control panel |
| | Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | | EQ 80 Hz | 0 to +6 dB (1 dB steps) | | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | | Low Shelf EQ | ±4 dB (1 dB steps) | | Tweeter gain | ±2 dB (0.5 dB steps) | | Input connectors |
| | Analog | XLR | | Digital (optional) | AES/EBU / SPDIF / word clock | | General data |
| | Panel | Front | | Frequency response | 32 Hz - 50 kHz | | THD > 80 Hz | ≤0.6 % | | Long term output | ≥114 dB | | Max. peak | ≥124 dB | | Crossover frequencies | 350 / 2800 Hz | | Input impedance | 10 KOhm | | Weight | 34 lb (15,4 kg) | | Magnetically shielded | Optional | | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
|
Αυτοενισχυόμενο monitor DSP μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 5" και tweeter 3/4“. Διαθέτει (Bi-Amp) δύο ενισχυτές 40W ξεχωριστούς για το woofer και το tweeter. Συνδυασμένη ψηφιακή (AES/EBU) και αναλογική είσοδος Ballanced XLR. Διακόπτης On/Off και ρυθμιστικά "Room Response Control" και έντασης. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod) και βάση επίτοιχη. Χρώμα Μαύρο ματ. Βάρος 5,6kg.
|
Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors
OVERVIEW
The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.
The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.
Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.
Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.
FEATURES
- 2-Way active studio monitor pair
- Ideally suited for computer studios, multimedia workstations and keyboards
- Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
- Powerful woofers and high-resolution tweeters
- High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
- Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
- Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
- Individual volume controls for both Line inputs plus Bass and Treble EQ controls
- 1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel
SPECIFICATIONS
MS20 Digital Monitor Speakers (Pair)
- Loudspeakers
Tweeter: ˜ 65 mm (2 1/2“), 8 ?
Woofer: ˜ 92 mm (3 5/8“), 4 ?
Audio Inputs
Line 1: 1/8" TRS stereo, impedance 20 k?
Line 2: 2 RCA, impedance 20 k?
Digital Inputs
Optical: TOSLINK
Coaxial: RCA
Converter: 24-bit
Sample rate:
System Specs
Output power: 2 x 20W
Frequency response: 50Hz to 25kHz
Power Supply
Mains Voltages: USA/Canada 120 V, 60 Hz
Power Consumption: 80W
|
Ενεργό monitor (2 way active), 8.75 ίντσες υψηλής ευκρίνιας , χαμηλής παραμόρφωσης LF αισθητήρες, 1 ίντσα θόλος τιτανίου, ferrofluid cooled tweeter, twin FR series ενισχυτές (150watt LF/100watt HF), passive radiator , articulate bass extension μέχρι 35Hz, balanced XLR/TRS και unbalanced RCA εισόδους, THX pm3™ για surround sound εφαρμογές.
High resolution Active studio reference monitorUltra-linear frequency response for accurate mix translation8.75-inch high-precision, low-distortion LF transducer1-inch titanium dome, ferrofluid cooled tweeterOptimized Waveguide for wide, even sweet zoneTwin FR Series amps — 150W for LF / 100W for HFCast aluminum Zero Edge Baffle™ minimizes diffractionFull internal damping eliminates midrange artifactsPassive radiator provides tight, articulate bass extension down to 35HzAcoustic Space, LF roll-off, and HF controlsBalanced XLR, TRS, and unbalanced RCA inputsOmniMount™ ready for easy wall/ceiling placementTHX pm3™ certified for surround sound applicationsPerfect for High-Definition audio, cinema and gaming systemsΔιαστάσεις (HxWxD) 425x 273x290mm.Bάρος 15,7kg. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.