| Price | €13.26 Original price was: €13.26.€11.93Η τρέχουσα τιμή είναι: €11.93. με ΦΠΑ 24% | €12.76 Original price was: €12.76.€11.49Η τρέχουσα τιμή είναι: €11.49. με ΦΠΑ 24% | €2.35 Original price was: €2.35.€2.12Η τρέχουσα τιμή είναι: €2.12. με ΦΠΑ 24% | €1.92 Original price was: €1.92.€1.73Η τρέχουσα τιμή είναι: €1.73. με ΦΠΑ 24% | €4.58 Original price was: €4.58.€4.12Η τρέχουσα τιμή είναι: €4.12. με ΦΠΑ 24% | €9.05 Original price was: €9.05.€8.15Η τρέχουσα τιμή είναι: €8.15. με ΦΠΑ 24% |
| Stock | Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Σε απόθεμα
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
|
| Content | 6-pin θηλυκό προεκτάσεως
6 pole female cable connector with Nickel housing and silver contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
Features & Benefits
- Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
|
B-NE5-FPD - XLR σασί Θηλυκό 5 pin D-type |
Kαπάκι προστασίας από τη σκόνη (όταν τα καλώδια είναι εκτός), για αρσενικά ΧLR βάσεως. |
Kαπάκι προστασίας από τη σκόνη (όταν τα καλώδια είναι εκτός), για Speakon βάσεως.
|
3-pin αρσενικό προέκτασης, με επίχρυσες επαφές/ black shell
The 3 Pole Male Cable Connector from Neutrik is manufactured with a black metal housing and gold contacts. It is reliable, easy to assemble and improves contact integrity as well as cable strain relief.
Male connector with improved locking recess without "window“, more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard
| NE5MX - XLR Αρσενικό προεκτάσεως 5pin
NE5MX - XLR male extension 5pin
PHASE OUT
direct replacement / successor: NC5MXX
5 pole male cable connector with Nickel housing and silver contacts.
The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
Features & Benefits
- Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
| Title |
NC5MX |
| Connection Type |
XLR |
| Gender |
male |
| Capacitance between contacts |
≤ 7 pF |
| Contact resistance |
≤ 3 mΩ |
| Dielectric strength |
1,5 kVdc |
| Insulation resistance |
> 10 GΩ (initial) |
| Rated current per contact |
7,5 A |
| Rated voltage |
< 50 V |
| Cable O.D. |
3.5 - 8.0 mm |
| Insertion force |
≤ 20 N |
| Withdrawal force |
≤ 20 N |
| Lifetime |
> 1000 mating cycles |
| Wiresize |
max. 1.0 mm² |
| Wiresize |
max. 18 AWG |
| Wiring |
Solder contacts |
| Locking device |
Latch lock |
| Boot |
Polyurethan |
| Contact plating |
2 µm Ag |
| Contacts |
Brass (CuZn39Pb3) |
| Insert |
Polyamide (PA 66) |
| Locking element |
Zinc diecast (ZnAl4Cu1) |
| Shell |
Zinc diecast (ZnAl4Cu1) |
| Shell plating |
Nickel |
| Strain relief |
Polyacetal (POM) |
| Approvals |
UL |
| Flammability |
UL 94 V-0 |
| Standard compliance |
IEC 61076-2-103 |
| Protection class |
IP 40 |
| Solderability |
Complies with IEC 68-2-20 |
| Temperature range |
-30 °C to +80 °C |
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.