Content |
Μετρητικό μικρόφωνο με κάψα 1/2“, Omni-directional, free-field, Class 1, σύμφωνα με IEC 61672-1, Phantom power 48 VDC, Electronic data sheet installed, απόκριση συχνότητας 5 Hz - 20 kHz, Dynamic Range: 16 -139 dB, ευαισθησία 42 mv/Pa, 100 Ohm, συμβατό με τον ΜΑ220 προενισχυτή. Μήκος 15,4cm, βάρος 100gr.
|
Πυκνωτικό μικρόφωνο μεγάλου διαφράγματος με απόκριση συχνότητας 20Hz – 20KHz, ευαισθησία –36 db re 1Mv Pa, με ρυθμιζόμενο διακόπτη εξασθένισης, ρυθμιζόμενο φίλτρο διέλευσης υψηλών συχνοτήτων και τρία πολικά διαγράμματα omni-directional, figure of 8, cardioid. Περιλαμβάνει την αντικραδασμική βάση SM2 και την βαλίτσα μεταφοράς RC1.
Tύπος: | Πυκνωτικό | Πολικό Διάγραμμα: | Omni-directional, figure of 8 & καρδιεοειδής | Απόκριση συχνότητας: | 20Hz - 20KHz | Ευαισθησία: | -36 db re 1 Volt/Pasca (16 mv @94db SPL) +/- 2 dB | Αντίσταση: | 200 ohms | Συνολική αρμονική παραμόρφωση: | 147 dB (@ 1% THD into 1K ohm) 157dB (@ 1% THD into 1K ohm) with pad set to maximum | Διαστάσεις: | - | Βάρος: | 2.6 kg με μπαταρία | Αξεσουάρ: | Αντικραδασμική βάση SM2 και την βαλίτσα μεταφοράς RC1 |
|
ΠΥΚΝΩΤΙΚΟ ΜΙΚΡΟΦΩΝΟ ΜΕ 5 ΠΟΛΙΚΑ ΔΙΑΓΡΑΜΜΑΤΑ, ΚΑΨΑ 1'' ΙΝΤΣΑΣ, ΕΝΔΕΙΚΤΙΚΑ LED ΕΠΙΛΟΓΗΣ ΠΟΛΙΚΟΥ ΔΙΑΓΡΑΜΜΑΤΟΣ ΚΑΙ ΥΠΕΡΟΔΗΓΗΣΗΣ ΕΞΟΔΟΥ ΣΗΜΑΤΟΣ, ΕΥΑΙΣΘΗΣΙΑ 23MV/PA, ΑΠΟΚΡΙΣΗ ΣΥΧΝΟΤΗΤΑΣ 20HZ-20KHZ, ΜΕΧΡΙ 158 dB MAX SPL. ΔΙΑΘΕΤΕΙ 3 ΕΠΙΛΟΓΕΣ BASS-CUT FILTER ΚΑΙ 3 ΕΠΙΛΟΓΕΣ ΠΡΟ-ΕΞΑΣΘΕΝΗΣΗΣ ΜΕ ΕΝΔΕΙΚΤΙΚΑ LED. ΠΛΗΡΩΣ ΠΡΟΣΤΑΤΕΥΜΕΝΟ ΑΠΟ ΗΛΕΚΤΡΟΜΑΓΝΗΤΙΚΕΣ ΠΑΡΕΜΒΟΛΕΣ. ΔΥΝΑΤΟΤΗΣ ΕΛΕΓΧΟΥ ΜΕΣΩ REMOTE CONTROL (ΠΡΟΑΙΡΕΤΙΚΑ). ΠΑΡΑΔΙΔΕΤΑΙ ΣΕ ΜΕΤΑΛΛΙΚΗ ΒΑΛΙΤΣΑ ΜΕ ΑΝΤΙΚΡΑΔΑΣΜΙΚΗ ΒΑΣΗ, POP FILTER ΚΑΙ ΑΝΤΙΑΝΕΜΙΟ. ΚΑΤΑΛΛΗΛΟ ΓΙΑ STUDIO RECORDING ΑΚΟΥΣΤΙΚΩΝ ΟΡΓΑΝΩΝ. 3 ΕΤΗ ΕΓΓΥΗΣΗ
Specifications
Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg) | Behringer C-1 Studio Condenser Microphone
The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
- Professional large-diaphragm condenser microphone for unsurpassed audio quality
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Gold-plated 3-pin XLR output connector for perfect signal transmission
- Ultra-rugged construction with die-cast body
- Swivel stand mount and carrying case included
Operating Principle |
Pressure Gradient |
Capsule |
Condenser |
Diaphragm |
0.63" / 16.0 mm |
Polar Pattern |
Cardioid |
Performance
Frequency Range |
40 Hz to 20 kHz |
Maximum SPL |
136 dB SPL |
Impedance |
100 Ohms |
Load Impedance |
1000 Ohms |
Sensitivity |
-33 dB |
THD |
1% |
Connectivity
Output Connectors (Analog) |
1 x XLR 3-Pin |
Power
Operating Voltage |
36 to 52 V |
Operating Current Consumption |
2.5 µA |
Physical
0.93 lb / 0.42 kg
Dimensions |
ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm |
Weight |
|
|
- Electret measuring microphone for measuring systems and audio recordings
- Designed for measuring PA systems, speakers and room acoustics
- Perfect complement to any real-time analyzer
- Flat frequency response for high precision
- Sturdy all-metal construction and narrow design
- Polar pattern: Omnidirectional
Type: |
Microphone for measurements |
Capsule type: |
Condenser |
Polar pattern: |
Omnidirectional |
Frequency range: |
20 - 20000 Hz |
S/N ratio: |
>76 dB |
Sensitivity: |
-37 dB |
Max. SPL: |
134 dB |
Phantom power: |
9-52 V DC |
Impedance: |
200 Ohm |
Connections: |
Microphone via 3-pin XLR |
Switch: |
Without |
Material: |
Aluminum |
Color: |
Black |
Dimensions: |
Length: 19,2 cm
Diameter: Ø 13 cm |
Weight: |
100 g |
|
Shure WCM16 Πυκνωτικό Μικρόφωνο Κεφαλής
The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.
Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.
The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.
Features:
Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes
Specifications:
Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.