ORTOFON OM Q.Bert ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ

69.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: OMQ.Bert Κατηγορία:
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  […]

 

Διαβάστε περισσότερα

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

 

 

Output voltage at 1000Hz, 5cm/sec.

11 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

Frequency range at -3dB

20-18.000 Hz

Frequency response

20-18.000 Hz – 3 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0 g (30 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

1.680 Ohm

Internal inductance

920 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-400 pF

Cartridge weight

5 g

Replacement stylus unit

Q.Bert

 

Βάρος 0.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “ORTOFON OM Q.Bert ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

ORTOFON OM Q.Bert ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeOrtofon 2M RED ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Ελλιπτική removeORTOFON OM PRO S ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeSHURE M44-7DJ Σφαιρική κεφαλή με βελόνα removeORTOFON Concorde Elektro Set removeORTOFON OM D 25 mono ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ remove
NameORTOFON OM Q.Bert ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeOrtofon 2M RED ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Ελλιπτική removeORTOFON OM PRO S ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeSHURE M44-7DJ Σφαιρική κεφαλή με βελόνα removeORTOFON Concorde Elektro Set removeORTOFON OM D 25 mono ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ remove
Image
SKUOMQ.Bert2MREDOMPROSM447ConcordeElektroSetOMD25mono
Rating
Price69.00 με ΦΠΑ 24% 105.40 με ΦΠΑ 24%49.00 με ΦΠΑ 24%372.00 με ΦΠΑ 24%129.00 με ΦΠΑ 24%75.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Μόνο 2 απομένουν σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Μόνο 2 απομένουν σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

 

 

Output voltage at 1000Hz, 5cm/sec.

11 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

-

Frequency range at -3dB

20-18.000 Hz

Frequency response

20-18.000 Hz - 3 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0 g (30 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

1.680 Ohm

Internal inductance

920 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-400 pF

Cartridge weight

5 g

Replacement stylus unit

Q.Bert

 

The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration.

The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.  The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
 

TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz  1,5 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Red
Cartridge weight 7,2 g
Replacement stylus unit 2M Red

A budget cartridge that out performs a lot of other top-of-the-line models.

No need to go broke to get an affordable, tough-as-nails scratching tool.

Technical Data:

  • Output voltage at 1000 Hz, 5cm/sec: 5 mV
  • Channel balance at 1 kHz: 2 dB
  • Channel separation at 1 kHz: 20 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at - 3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz + 3 / - 2 dB
  • FIM distortion at recommended
    tracking force, DIN 45.542:
  • Tracking ability at 315Hz at
    recommended tracking force: 70 µm
  • Compliance, dynamic, lateral: 7 µm/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 26 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force, recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour: Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: PRO S

M44-7

Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ\'s worldwide.  Engineered for scratch DJ\'s and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.

  • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7\'s rugged construction is highly durable, but will not unduly wear your vinyl.
  • With a 9.5 mV output, the M44-7 produces powerful, resonant sound. 
  • Skip Resistance: ultra high
  • Output: ultra high
  • Record Wear: ultra low
  • Sound Emphasis: big bass

Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz  Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z  

 

Features

• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case


Technical Data

Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g

Ortofon D 25 M Mono Cartridge Spherical Diamond

OM D 25 M Technical Data:

  • Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
  • Channel balance at 1 kHz
  • Channel separation at 1 kHz
  • Channel separation at 15 kHz
  • Frequency range: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz +3 / - 2 dB
  • FIM distortion at recommended tracking force, DIN 45.542:
  • Tracking ability at 315Hz at recommended tracking force: > 70 µm
  • Compliance, dynamic, lateral: 7 µm / mN
  • Stylus type: Spherical
  • Stylus tip radius: R 25 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 2,0-3,0 g (20-30 mN)
  • Tracking force, recommended: 2,5 g (25 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour, body/stylus: Black/Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: Stylus D 25 M
  • Weight0.50 kg0.70 kg0.50 kg0.5 kg0.30 kg0.50 kg
    DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
    Additional information
    Βάρος 0.50 kg
    Βάρος 0.70 kg
    Βάρος 0.50 kg
    Βάρος 0.5 kg
    Βάρος 0.30 kg
    Βάρος 0.50 kg