The PECHOR is an easy to use but velvety sounding Chorus effect. With only three controllers Rate, Depth and Intensity you will easily and quickly find the sound you’re looking for! Technical Specifications Input impedance: 470 K ohms Output impedance: 100 k ohms Residual noise: -85 dB (all controls centered) Controls: RATE, DEPTH, INTENSITY Indicator: […]
The PECHOR is an easy to use but velvety sounding Chorus effect. With only three controllers Rate, Depth and Intensity you will easily and quickly find the sound you’re looking for!
Technical Specifications
Input impedance: 470 K ohms
Output impedance: 100 k ohms
Residual noise: -85 dB (all controls centered)
Controls: RATE, DEPTH, INTENSITY
Indicator: LED
Connectors: IN, OUT, DC input (9 V)
Footswitch: true bybass
Power requirements: 9 V PP3 or 9 V DC supply (optional)
Power consumption: 25 mA (9 V DC)
Dimensions (W x H x D): 120 mm x 120 mm x 56 mm
Βάρος
0.74 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “PALMER MI Chorus – Chorus effect for guitar” Ακύρωση απάντησης
The PECHOR is an easy to use but velvety sounding Chorus effect. With only three controllers Rate, Depth and Intensity you will easily and quickly find the sound you're looking for!
Technical Specifications
Input impedance: 470 K ohms
Output impedance: 100 k ohms
Residual noise: -85 dB (all controls centered)
Controls: RATE, DEPTH, INTENSITY
Indicator: LED
Connectors: IN, OUT, DC input (9 V)
Footswitch: true bybass
Power requirements: 9 V PP3 or 9 V DC supply (optional)
Power consumption: 25 mA (9 V DC)
Dimensions (W x H x D): 120 mm x 120 mm x 56 mm
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
Power Supply: Four AA alkaline batteries or DC9V AC adapter
Battery Life: Approx. 18 hours
Current Consumption: 95 mA
Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
Included Items: Four AA alkaline batteries
The new V847 Wah-Wah pedal is an enhanced version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the new Wah-Wah offers guitarists the same legendary tone with the addition of AC power capability and a buffered input jack for preserving the unprocessed guitar tone when the pedal is not engaged. The pedalʼs inductor has undergone a redesign to be closer in specification to the original VOX wah inductors, for improved dynamics and tone. These additions will benefit players of all genres who use a wah pedal as an integral part of their sound.
About the Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V847 Wah-Wah Specificaitons
Input/Output jacks: INST jack, AMP jack, DC i/p jack.
Power supply: One 9V DC battery 6F22(S-006P)
Power consumption: 540uA @ 9VDC
Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest postion)
Weight: 1673g (including battery)
Included Accessories: Vinyl carry bag
Bass chorus like the world has never known.
The DigiTech XBC Bass Multi Chorus Pedal is designed especially for bass. The XBC Bass Chorus Pedal lets you morph up to 16 bass chorus voices at once for an endless palette of amazingly rich effects. Built-in voice randomization increases with more voices for an even denser wash of killer chorus. DigiTech includes a 9V battery with the XBC Bass Multi Chorus Pedal.
DigiTech XBC Bass Multi Chorus Pedal Features:
Designed especially for bass
Morph up to 16 bass chorus voices at once
Voice randomization increases with more voices
Product Features:
Shape your sound and eliminate feedback with 7 bands of equalization This BEHRINGER product has been designed to compete head to head with leading products on the market Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band Status LED for effect on/off and battery check Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included) First-class electronic On/Off switch for noise-free operation High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany
How the specific frequency bands of the BEQ700 can shape your sound
50 Hz (sub-bass) Boost: To thicken up sub-bass content, which is mostly felt rather than heard Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power 120 Hz (soft bass) Boost: To enhance the lower end of the bass spectrum Cut: To reduce the tendency of low frequency content to overwhelm a small room 400 Hz (hard bass) Boost: To enhance the "hard” bass punch of fundamental tones Cut: To reduce punch for better linkage with the kick drum 500 Hz Boost: or Cut: To control bass clarity and warmth 800 Hz Boost: To add an aggressive edge to the overall bass sound Cut: For reducing somewhat nasal or horn-like content 4.5 kHz Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone Cut: To eliminate harshness 10 kHz Boost: To bring out the upper harmonics and add edge to the overall bass tonality Cut: Apply a cut to reduce harsh high-frequency content or hiss
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.