PALMER PWT12 MI PWT 12 – Universal Pedalboard Power Pack 12 Outputs

The PWT12 is universal pedal board power supply with 12 outputs electrically isolated in pairs. Outputs 1 - 8 provide 9 V DC each with a maximum current draw of 250 mA per pair. Outputs 7 and 8 additionally feature a polarity switch to change the center pin from negative to positive (and the barrel to negative).

Outputs 9/10 provide 18 V DC each with a maximum current draw of 125 mA. Additionally, the upper output is switchable to 12 V DC. Providing 9 V DC/250 mA, outputs 11/12 are also switchable to 12 V AC. The green indicator LEDs turn red when alternative ouput voltages are selected.

All output pairs are individually protected against shorts and overload. When a fuse trips the LED indicator of the corresponding pair goes out. After the fault condition has been removed the fuse is automatically reset, and within a few seconds the output resumes operation indicated by the illuminated LED.

The toroidal transformer and the steel housing of the PWT12 provide smooth FX operation free of interference and hum pickup. Mains power input is switchable between 115 V and 230 V.

The PWT12 features two brackets for easy pedal board mounting while a cover plate protects the DC plugs. The DC cables can be fixed to the plate with cable ties for strain relief. The PWT12 comes with a set of 12 long DC cables.

• Universal power supply for effect pedals
• 12 outputs on barrel-style DC connectors with 2.1 mm center pin
• regulated DC output, all outputs electrically isolated in pairs
• Outputs 1/2, 3/4, 5/6: 9 VDC each, 250 mA per pair, center pin negative, green LED indicators
• Outputs 7/8: 9 VDC, 250 mA/pair, switchable polarity, two-color LED, green = center pin negative, red = center pin positive
• Outputs 9/10: 2x 18VDC (LED = green), switchable to 1x 12VDC / 1x 18VDC (LED = red), maximum current 125mA/pair, center pin negative
• Short circuit protection per pair with automatic reset
• 115 V / 230 V switchable
• Mains fuse: 5 x 20 mm fine wire, 115 V = T 500 mA;  230 V = T 250 mA
• Toroidal transformer, 20 VA continuous

Χαρακτηριστικά  

• 18V Power Supply
• 18VDC @ 150mA 5% regulated

Υποστηριζόμενα Πετάλια

• Crybaby Multi-wah
• SW-95 Slash Wah
• DD11 Dime Distortion
• M108 10-band EQ
• KFK1 10-band EQ
• M134 Chorus
• M117R Flanger
• EVH 117 Flanger
• M181 Bass Blowtorch.

Βαλίτσα μεταφοράς και Pedal Board, ξύλινη ανθεκτική κατασκευή με αλουμινένιες γωνίες, ενισχυμένο εσωτερικό από αφρό για προστασία του εξοπλισμού μας, δερμάτινη χειρολαβή, μεγάλος αποθηκευτικός χώρος στη βάση, Pedalboard που μπορει να χρησιμοποιηθεί μέσα στη θήκη ή στο πάτωμα, ελαφριά κατασκευή από ανθεκτικό αλουμίνιο, low profile σχέδιο, βάσεις / πόδια από σκληρό πλαστικό που δεν επιτρέπει τη μετακίνηση του pedalboard, διαστάσεις 70 x 31,6 εκ.

Είδος:

Τροφοδοτικό από τη T-Rex 12 V DC, 500mA

Tροφοδοτικό για πολυεφφέ και ενισχυτές

Product Features:

• 1.7 A current capacity can power more than 20 effects pedals, keyboards and other DC 9 V gear*
• Supplied with a full complement of connectors and jumper cords for total compatibility
• Includes 4 assorted jumper cables and 2 daisy-chain cables each with 5 connectors
• Takes up only one outlet space and frees up more room for your pedals
• Runs on any AC power supply from 100 - 240 V; worldwide usability without transformer
• Transformerless design eliminates 50/60-cycle hum and extraneous noise
• High-quality components and exceptionally rugged construction ensure long life