POLK AUDIO PSW 111 ΕΝΕΡΓΟ SUBWOOFER 150WATT

1 x 8 ¨ Dynamic Balance Composite
Cone
Auto On/Off
Port Type Downword Firing
Cont. Power 150watt
Dynamic Power 300 Watts
Dimensions (cm) 30 x 28 x 33

Ενεργό υπογούφερ κλειστού τύπου. 2 μεγάφωνα
μεγάλης διαδρομής 200mm Paper/Kevlar.
Ψηφιακός ενισχυτής class D 400 Watt με DSP.
Είσοδοι σήματος Line, ηχείων, 12V trigger x 2
και RS-232 (για έλεγχο αυτοματισμών).

Ενεργό υπογούφερ κλειστού τύπου. Μεγάφωνο
μεγάλης διαδρομής 250mm Paper/Kevlar.
Ψηφιακός ενισχυτής ICE power 200 Watt.
Είσοδοι σήματος LINE και ηχείων, 12V trigger.

Product Series     Subwoofers
Speaker Type     Subwoofer
Frequency Range (+/-3 dB) [Hz]     28 - 190
Maximum SPL [dB]     112
Crossover Frequency [Hz]     40 - 120 Hz
Low Frequency Driver     1 x 12" long stroke  Polymere Aluminimum
Enclosure Type     Bass Reflex
Bass Reflex Tuning Frequency [Hz]     36.0
Max. Amplifier Power Output [RMS watt]     220
Continous IEC Power Output [RMS watt]     170
Input Impedance [Ω]     25K
Connection input(s)     Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding     No
Recommended Placement     Floor
Near wall or corner
Recommended Distance From Wall [cm]     > 5
Functions     Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W]     250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm]     370 x 340 x 380
Weight [kg]     14.7
Accessories Included     Manual
Rubber Bumpers
Spikes M6
Finish     Black Ash Vinyl
Light Walnut Vinyl
White Vinyl

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122

The SX-120 subwoofer was designed from the ground up by our engineers in London, with a custom-designed 8-inch driver and a powerful 70W RMS amplifier. Components were hand picked by our in-house engineers and then painstakingly voiced to provide premium sound quality

 Features

        Rigid MDF cabinet
        70W RMS amplifier
        8-inch long-throw woofer
        Individual controls to tailor volume, crossover frequency and phase adjustment

Sensitivity    180mV for full power output
Frequency response    34Hz - 150Hz
Rated output power    70W
Drive units    1 x 8" (203mm) long throw woofer
Crossover    50 - 150Hz continuous/active
Max. power consumption    100W
Colour    Black
Dimensions (WxHxD)    300 x 300 x 310mm (11.8 x 11.8 x 12.2“)
Weight    7.7kg (17lbs)