Installation points available on rear, top and bottom panels
4 pole EUROBLOCK connector (audio input and parallel link output)
Dimensions: 510mm X 295mm X 325mm
Το COMPACT M 08 είναι ένα ξύλινο ηχείο 2 δρόμων κατάλληλο για σταθερές εγκαταστάσεις. Το M 08 διαθέτει υψηλή ευαισθησία, χάρη στη χρήση μεγάλων μαγνητών και ποιότητα ήχου HI-FI, με ομαλή και ευρεία απόκριση συχνότητας. Yψηλό επίπεδο SPL σε σχέση με το μέγεθός του. Ο κομψός και συμπαγής σχεδιασμός με υψηλής ποιότητας φινίρισμα, καθιστά το M 08 κατάλληλο για σχεδόν οποιοδήποτε περιβάλλον, ακόμη και με αρχιτεκτονικούς περιορισμούς. Τα προαιρετικά εξαρτήματα στερέωσης επιτρέπουν τη χρήση του M 08 σε εγκαταστάσεις τοίχου ή οροφής.
Βάρος
17 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “RCF COMPACT M 10 Παθητικό Ηχείο 2 Δρόμων 10″ 90×70° 300W RMS, 128db Μαύρο” Ακύρωση απάντησης
Installation points available on rear, top and bottom panels
4 pole EUROBLOCK connector (audio input and parallel link output)
Dimensions: 510mm X 295mm X 325mm
Το COMPACT M 08 είναι ένα ξύλινο ηχείο 2 δρόμων κατάλληλο για σταθερές εγκαταστάσεις. Το M 08 διαθέτει υψηλή ευαισθησία, χάρη στη χρήση μεγάλων μαγνητών και ποιότητα ήχου HI-FI, με ομαλή και ευρεία απόκριση συχνότητας. Yψηλό επίπεδο SPL σε σχέση με το μέγεθός του. Ο κομψός και συμπαγής σχεδιασμός με υψηλής ποιότητας φινίρισμα, καθιστά το M 08 κατάλληλο για σχεδόν οποιοδήποτε περιβάλλον, ακόμη και με αρχιτεκτονικούς περιορισμούς. Τα προαιρετικά εξαρτήματα στερέωσης επιτρέπουν τη χρήση του M 08 σε εγκαταστάσεις τοίχου ή οροφής.
For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution - MAUI® i1.
This feature is achieved with nine 3" mid-range drivers, two 1" neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible.
Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating.
For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free.
Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location.
The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations.
Product type
Installation Loudspeakers
Type
Passive
Low/mid driver dimensions
9 x 3 "
Woofer size
76.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Horn
BEM optimized CD Horn
HF driver dimensions
2 x 1 "
HF Driver Size
25.4 mm
HF driver magnet
Neodymium
HF driver brand
Custom-made
Dispersion (H x V)
120° x 30
Load rating (RMS)
120 W
Peak power
480 W
Frequency response
130 - 19000 Hz
Crossover frequency
2500 Hz
SPL (1W/1m)
94 dB
Max. SPL
116 dB
Impedance
8 Ohm(s)
Input selector switch
70 V - 100V - 8 Ohms (transformer bypass)
100V Transformer power taps
60 - 30 - 15 - 7.5 W
70V Transformer power taps
60 - 30 - 15 - 7.5 W
Protection class IP
65
Loudspeaker inputs
1
Speaker input connections
4-pin Euro Terminal Block (Pitch - 5,08 mm)
Cabinet material
Aluminum
Cabinet construction
Closed
Width
85 mm
Height
985 mm
Depth
105 mm
Accessories (included)
U-Bracket for surface mount
Optional Accessories
Bracket for tilt installation applications
Weight
8,6 kg
Configuration
Passive 2-Way
Enclosure Type
Bass-Reflex Loudspeaker
Total Power Capacity
40 W RMS
160 W Peak
Constant Voltage / Transformer Taps
None
System Impedance
8 Ohms
Drivers
HF Driver
1" / 25.4 mm Tweeter
HF Voice Coil
0.8" / 20.3 mm
MF Driver
None
LF Driver
4" / 101.6 mm Woofer
LF Voice Coil
1" / 25.4 mm
Magnet
Neodymium
Performance
Frequency Response
70 Hz to 20 kHz -10 dB
Maximum SPL
108 dB
Coverage Angle
110° H x 100° V
Directivity
7 (Directivity Index)
Speaker Sensitivity
86 dB
Protections
Overcurrent, Ultrasonic
Connectivity
Audio I/O
2 x Euroblock Speaker Input/Output
Signal Processing
Crossover
3 kHz
Phase Adjustment
None
Physical
Mounting
4 x M6 Bracket Point
Handles
None
Construction Material
Metal, Plastic
Dimensions
8.5 x 6.1 x 5.3" / 216 x 154 x 135 mm
Weight
2.2 kg
HX-5B
Line Array Stack τεσσάρων ηχείων, 2 δρόμων, bass-reflex, ισχύος
200W/600W@8Ω (cont.pink noise/cont. program), 4x12cm cone-type LF, 12xHF balanced dome-type.
99dB/1W/1M (15° mode), 85Hz-20KHz
(-10dB) (15° mode), Ηor.100ο, Vert. από 15° έως 60° επιλεγόμενα. Mαύρο χρώμα.
(408W x 546H x 342D mm). Δυνατότητα ανάρτησης. 16kg.
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany
Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors
OVERVIEW
The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.
The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.
Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.
Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.
FEATURES
2-Way active studio monitor pair
Ideally suited for computer studios, multimedia workstations and keyboards
Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
Powerful woofers and high-resolution tweeters
High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
Individual volume controls for both Line inputs plus Bass and Treble EQ controls
1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel
SPECIFICATIONS
MS20 Digital Monitor Speakers (Pair)
Loudspeakers
Tweeter: ˜ 65 mm (2 1/2“), 8 ?
Woofer: ˜ 92 mm (3 5/8“), 4 ?
Audio Inputs
Line 1: 1/8" TRS stereo, impedance 20 k?
Line 2: 2 RCA, impedance 20 k?
Digital Inputs
Optical: TOSLINK
Coaxial: RCA
Converter: 24-bit
Sample rate:
System Specs
Output power: 2 x 20W
Frequency response: 50Hz to 25kHz
Power Supply
Mains Voltages: USA/Canada 120 V, 60 Hz
Power Consumption: 80W
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.