RELOOP OM BLK Mix and Scratch Κεφαλή με βέλονα

35.00 με ΦΠΑ 24%

Μόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο Διαθέσιμο Κωδικός προϊόντος: 040247 Κατηγορία:
RELOOP OM BLACK Η κεφαλοβελόνα πικάπ OM από τη Reloop σε συνεργασία με την Ortofon, με headshell, διαθέτει κορυφαία χαρακτηριστικά ήxου και πολύ στιβαρή κατασκευή, που την καθιστά την ιδανική επιλογή για Dj\’s και Scratch. Χαρακτηριστικά Κεφαλή με βελόνα Σφαιρική βελόνα Εύρος συχνοτήτων: 20 Hz – 18 kHz Τάση εξόδου (5 cm / s): 5 […]

 

Διαβάστε περισσότερα

RELOOP OM BLACK

Η κεφαλοβελόνα πικάπ OM από τη Reloop σε συνεργασία με την Ortofon, με headshell, διαθέτει κορυφαία χαρακτηριστικά ήxου και πολύ στιβαρή κατασκευή, που την καθιστά την ιδανική επιλογή για Dj\’s και Scratch.

Χαρακτηριστικά

  • Κεφαλή με βελόνα
  • Σφαιρική βελόνα
  • Εύρος συχνοτήτων: 20 Hz – 18 kHz
  • Τάση εξόδου (5 cm / s): 5 mV
  • Εύρος Βάρους: 3-5 g
  • Συνιστώμενη πίεση: 4 g
  • Βάρος: 0,005 g
Βάρος 0.10 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “RELOOP OM BLK Mix and Scratch Κεφαλή με βέλονα”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

RELOOP OM BLK Mix and Scratch Κεφαλή με βέλονα removeShure M92E ΚΕΦΑΛΗ ΠΙΚ ΑΠ P-mount too, Eliptical removeORTOFON CONCORDE DIGITRACK Twin Κεφαλή removeORTOFON MC 3 Turbo ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON 2M Bronze ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Fine Elliptical removeORTOFON OM Scratch ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ remove
NameRELOOP OM BLK Mix and Scratch Κεφαλή με βέλονα removeShure M92E ΚΕΦΑΛΗ ΠΙΚ ΑΠ P-mount too, Eliptical removeORTOFON CONCORDE DIGITRACK Twin Κεφαλή removeORTOFON MC 3 Turbo ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON 2M Bronze ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Fine Elliptical removeORTOFON OM Scratch ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ remove
Image
SKU040247M92ECONCORDE DIGITRACKTwinMC3Turbo2MBRONZEOMScratch
Rating
Price 35.00 με ΦΠΑ 24% 146.31 με ΦΠΑ 24%223.00 με ΦΠΑ 24%349.00 με ΦΠΑ 24%345.00 με ΦΠΑ 24%64.00 με ΦΠΑ 24%
Stock

Μόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

AvailabilityΜόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
ContentRELOOP OM BLACK Η κεφαλοβελόνα πικάπ OM από τη Reloop σε συνεργασία με την Ortofon, με headshell, διαθέτει κορυφαία χαρακτηριστικά ήxου και πολύ στιβαρή κατασκευή, που την καθιστά την ιδανική επιλογή για Dj\'s και Scratch. Χαρακτηριστικά
  • Κεφαλή με βελόνα
  • Σφαιρική βελόνα
  • Εύρος συχνοτήτων: 20 Hz - 18 kHz
  • Τάση εξόδου (5 cm / s): 5 mV
  • Εύρος Βάρους: 3-5 g
  • Συνιστώμενη πίεση: 4 g
  • Βάρος: 0,005 g

Κεφαλή με ελλειπτική βελόνα. Βάρος ανάγνωσης 0,75-1,50gr. Ευαισθησία 5 mV. Απόκριση  συχνοτήτων 20-18KHz, διαχωρισμός καναλιών 20db.


The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear.

Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever.  Accurately traces the grooves of your records for smooth sound throughout the frequency range.
    Universal mount
    Biradial diamond tip
    Tubular aluminum alloy stylus cantilever
    Standard mount adapter
    Mounting hardware
    Stylus guard
    Low Tracking Force
    Minimizes wear on your irreplaceable vinyl collection

Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.

  • Type: MM
  • Fixing: P-mount
  • Output voltage: 5,0mV bei 1kHz, 5cm/sec.
  • Amplifier-connection: Phono MM
  • Frequency range: 20-18.000Hz
  • Material: diamond, bonded
  • Stylus type: elliptical 0.4 x 0.7 mil
  • Tracking force range: 0,75-1,5g
  • Tracking force, recommended: 1,25g
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-300pF
  • Weight: 7,3g*

Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.

ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI

Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.

With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.

Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.

TECHNICAL DATA CONCORDE DIGITRACK

Output voltage at 1000 Hz,
5cm/sec.
8 mV
Channel balance at 1 kHz
1,5 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-20.000 Hz
Frequency response
20-18.000 Hz -3 /- 2dB
FIM distortion at recommended tracking force,
DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
80 m
Compliance, dynamic, lateral
12 m/mN
Stylus type
Spherical
Stylus tip radius
R18
Equivalent stylus tip mass
0,6 mg
Tracking force range
2-4 g (20-40 mN)
Tracking force, recommended
3,0 g (30 mN)Tracking angle 20Internal impedance, DC resistance

1325 Ohm
Internal inductance
765 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Red/Red
Cartridge weight
18,5 g
Replacement stylus unit
Digitrack

The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond.  The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models.  The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.


Technical data  
Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 24 dB
Channel separation at 15 kHz >15 dB
Frequency range at - 3dB 20-30.000 Hz
Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 70 µm
Compliance, dynamic, lateral 13 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,8-2,2 g (18-22 mN)
Tracking force, recommended 2 g (20 mN)
Tracking angle 20°
Internal impedance, DC resistance 100 Ohm
Recommended load impedance 47 kOhm /
Cartridge body material Noryl
Cartridge colour Black
Cartridge weight 4,1 g

2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.  The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners.  Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.  The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. 


TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-29.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Bronze
Cartridge weight  7,2 g
Replacement stylus unit 2M Bronze

For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.  

Output voltage at 1000Hz, 5cm/sec.

7 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

25 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-15.000 Hz 3dB/-2dB

Tracking ability at 315 Hz at recommmende tracking force

80 μm

Compliance, dynamic lateral

6 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0-5,0 g (30-50 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

750 Ohm

Internal inductance

450 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

5 g

Replacement stylus unit

scratch

 
Weight0.10 kg0.20 kg0.50 kg0.40 kg0.70 kg0.10 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 0.10 kg
Βάρος 0.20 kg
Βάρος 0.50 kg
Βάρος 0.40 kg
Βάρος 0.70 kg
Βάρος 0.10 kg