Content |
The SX-1800 produces 1800 Watts of power from a class AB amplifier design.
Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at
a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks
to the internal amplifier design and variable-speed fan cooling.
FEATURES;
Professional Class AB Power Amplifier
400 Watts per side @ 8 Ohms
600 Watts per side @ 4 Ohms
900 Watts per side @ 2 Ohms
1800 Watts bridged mono @ 4 Ohms
Dual Variable-speed Fan Cooling System
Signal, Peak, and Protection Circuit Indicators
5-way Binding Post and Speakon Speaker Outputs
XLR and TRS Input connections
Dual Rack Space Design
| Τελικός ενισχυτής 2Χ750W/4Ω, 2Χ500W/8Ω, 2Χ1200W/2Ω, bridged 2400W/4Ω, απόκριση 20-20kHz, κύκλωμα προστασίας υπερθέρμανσης, βραχυκυκλώματος, DC voltage. Διαθέτει κύκλωμα clip-limiter, είσοδοι balanced XLR, 1/4 TRS, έξοδοι speakon & binding post, high pass filter 30Ηz & 50Ηz. Ανεμιστήρας ψύξης. Ύψος 2U. Κατάλληλος για εγκαταστάσεις & P.A. 15,6Kg. |
Crown DSi 2000 2x800W-4Ω Τελικός Ενισχυτής
Τελικός Ενισχυτής Switching, ισχύος2x800W@4Ω, bridged 2000W@4Ω,ενσωματωμένο DSP για κάθε κανάλι, είσοδοι τύπου Phoenix & HD-15, έξοδοι τύπου Barrier Strip, διαχείριση μέσω με Η/Υ (USB) συμβατότητα με HiQnet. Κατάλληλος για κινηματογραφική χρήση, 15 έτοιμα εργοστασιακά preset για κινηματογραφικά ηχεία JBL. Βάρος 8,6 Kg.
|
Επαγγελματικός τελικός ενισχυτής 2x700W RMS @ 4Ω, 2x500W RMS @
8Ω. Διαθέτει εισόδους RCA (unbalanced), 3‐pin XLR και jack 6,3mm
(balanced), εξόδους speakon combo (για speakon και jack 6,3mm) και
μπόρνες. Τέλος διαθέτει crossover switch (100Hz low pass στο κανάλι 1
και high pass στο κανάλι 2). Προστασίες short circuit, open circuit,
υπερθέρμανσης, RF και DC faults. Διαστάσεις (HxWxD) 89x483x257mm ‐
12,6kg.
|
Όμοια χαρακτηριστικά με τον V-2000 αλλά με ισχύ 2Χ550W/4Ω, 2Χ300W/8Ω, 2Χ900W/2Ω, bridge 1900W/4Ω, 10,5Kg. |
Crownʼs new CTs series of power amplifiers are remarkable for their loud, punchy sound; sustained, tight bass; and superior protection against overheating and overload. This paper explains the design features behind those advantages. After reading this information, youʼll know why Crown CTs amps sound better than the competition. CTs amplifiers can provide large amounts of power into various loads, such as 2, 4, 8 ohms and 70V. With most power amps, the maximum output power tends to drop as the load impedance increases. But with the CTs series, the power stays the same at almost any impedance. 2-ohm Dual (per Ch.) 250W 4-ohm Dual (per Ch.) 600W 8-ohm Dual (per Ch.) 600W 16-ohm Dual (per Ch.) 300W 70V Dual (per Ch.) 600W 4-ohm Bridge 500W 8-ohm Bridge 1200W 16-ohm Bridge 1200W 140V Bridge 1200W Crown switching power supply for less weight Sustained Power on long-duration signals due to regulated, "stiff” power supplies with incredible energy storage (huge filter capacitors). Extra Hidden Power during high-level transients and during incomplete use of all the channels. Overheating and overload protection thanks to the sophisticated TLC circuitry which compresses the signal only when needed. Compression is controlled not by temperature, but by signal voltage. This keeps the loudness up during compression more than with competitive amps. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.