Φλασερ 1500W με DMX Freq 1-15Hz The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency. The Titan can be dimmed from 0 […]
The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency.
The Titan can be dimmed from 0 to 100% and has a flash speed of 1 to 13 times per second.
The ShowTec Titan Strobe comes with PX-1500 lamp.
1500W DMX Megastrobe. Dimmable through controller.
The ShowTec Titan Strobe is a powerful 1500W strobe that can be used in a DMX setup or as a stand-alone device. In the latter case, the dip switches on the back of the strobe are used to adjust brightness and frequency.
The Titan can be dimmed from 0 to 100% and has a flash speed of 1 to 13 times per second.
The ShowTec Titan Strobe comes with PX-1500 lamp.
1500W DMX Megastrobe. Dimmable through controller.
Cameo THUNDER WASH 600 W 3 in 1 Strobe, Blinder and Wash Light 648 x 0.2 W white
Strobe, Blinder and Wash Light all in one
648 white SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
4-zone segment control for spectacular chase effects
The Thunder Wash 600 W is a Strobe, Blinder and Wash Light all in one. It is equipped with 648 white 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 600 W comes with 3-pin XLR sockets for DMX input and output, 5 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
• IP-54 Die cast housing
• Powercon True1 in- and outputs
• 28.000 Lumens
• DMX & RDM Protocol
The XPLO-15 is a professional strobe from the Showtec Infinity range. It is designed for the most high demanding light designers and rental companies. But it's not only the powerful output that takes this strobe to a new level of quality. Every detail of the XPLO-15 is thought over to make this strobe the perfect choice for professionals. It runs on DMX and RDM protocol, the die cast housing is IP-54 rated and equipped with Neutrik Powercon True1 in- and outputs. The menu based on a color display will always be in the correct position due to its built-in gravity sensor. However it's a rugged and heavy duty housing the bracket keeps the unit in the correct position at all times. This heavy duty bracket is also very easy to fix with just one handling. The XPLO-15 has 4 dimming curves and separate strobe intensity, duration and rate parameters. Eight unique zones of control allow ultimate flexibility while unique built-in chases aid in creativity and simplicity. With over 28,000 lumens of output, the XPLO-15 rivals conventional strobes and retains dynamic looks whether washing a stage or pointing directly at an audience.
Specifications
Light Source
LED System: 576 x 6500K Luxeon SMD
Drive Current: 560mA
Output: 28.000 lumen
Electrical
Power Supply: 100-240 VAC, 50/60Hz
Power Consumption: 155W Max
Control
Control Mode: DMX512 or RDM
DMX channels: 1,3,4,6,28
Optical system
Dimmer: 0-100%
Strobe: 0.5 – 30Hz
Beam Angle: 115 degrees
Dimming curves: Linear, PL-Curve, S-Curve, Square-Curve
Physical
Dimensions: 390 x 150 x 60 mm
Weight: 5,4 kg
Housing: Die Cast Aluminum
Color: Black, powder coated
Power Connectors: Neutrik Powercon True1 in-& output
Data Connectors: Neutrik XLR 3pole
Cooling: Convection
Safety
Operation temperature: -20~40°C
Protection: IP-54
Retro strobe and wash light 24x0.25W RGB 3in1 and 100W Gold Color cob led for background lighting DJ, disco, Bar, Party, Christmas club
Small strobe effect with high output
High-quality strobe flash Cob
Flash rate adjustable
Control via stand-alone
Strobe effect
With a beam angle of 60°
Very high color rendering index (CRI)
With Mounting bracket
For application areas such as: Party room; Decoration
Voltage :AC100V-240V, 50/60Hz
Power :200 watts
Light source :1 * 100W COB warm /76pcs RGB5050 beads
Life span: 100,000 hours
Color temperature: 3,200-5,600 thousand
Dimmer :0-100% linear dimmer
Stroboscopic :0-20 times/second
Channel :6CH
Control mode :DMX512 / master/slave/automatic mode
IPRate:IP56
Size :280 * 265 * 260 mm
Weight :3 kg
DMX Strobe 1500W για την λειτουργία του χρειάζονται 2 κανάλια DMX (φωτεινότητα+Flash-rate 1-12 flashes/sec. Είσοδος - έξοδος DMX με 3πινα XLR. Τροφοδοσία: 230V AC, 50 Hz ~, κατανάλωση ρεύματος 1500W, διαστάσεις (LxWxH): 460x240x140mm. Βάρος: 5κιλά. Λυχνία: XOP-15 (52202176)
Classic strobe with 1500 W flash-tube and DMX control
Elaborate reflector system
Flash tube already installed
Strobe effect
The device is cooled by passive convection cooling
Control via stand-alone; DMX
Dimmer electronic; effect speed adjustable
Preprogrammed in LED PC-Control 512; Light Captain
Power supply:
230 V AC, 50 Hz
Power consumption:
1500 W
IP classification:
IP20
Protection class:
Protection class I
Power connection:
Fixed power supply cord with safety plug
Cable construction:
3 x 1 mm² H05VV-F
Cable length:
Approx. 1 m
Lamp type:
Gas discharge lamp
Color generation:
Cold white (CW)
DMX channels:
2
DMX input:
1 x 3-pin XLR (M) mounting version
DMX output:
1 x 3-pin XLR (F) mounting version
Cooling:
Passive convection cooling
Control:
Stand-alone; DMX
Preprogrammed in:
LED PC-Control 512; Light Captain
Housing color:
Black
Material:
Metal
Dimensions:
Width: 46 cm
Depth: 24 cm
Height: 14 cm
Weight:
3,11 kg
Illuminant
Energy efficiency class (A - G):
G
Mounting bracket
Diameter mounting holes:
3 x Ø10mm
Material:
Metal, 1,5 mm
Specifications: Length: 425 mm without bracket Width: 245 mm without bracket Height: 240 mm without bracket Weight: 7.5 kg without bracket Power connection: 1.5 m cable tail, 14 AWG DMX data in/out: 3-pin and 5-pin XLR sockets Type: Xenon discharge Approved lamps: MAX-15 Xenon (220-240 V power) AC power (MAX-15 model): 200-240 V nominal, 50/60 Hz Peak current consumption: 33 A Main fuse (all AC power voltages): 20 AT (slow blow), 250 V AC mains power cable: 14 AWG or 2.5mm2 Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply) Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply) Blinder effect: Continuous with auto fade Strobe intensity: Blackout - maximum Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
CONTROL AND PROGRAMMING Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1 DMX channels: 1, 3, and 4 channel modes Stand-alone control: Via N.O. or N.C. SPST switch Stand-alone options: Selectable flash rate or blinder effect Setting and addressing: LCD display Protocol: DMX512 Receiver: RS-485
Optional spare parts:
Lamp tube hanging Clamps strobe light detonator ( small black box)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual
Fixtures Library grandMA
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.