| Content |
Electrical Specifications and Connections
Rated Current (A) 16 A
Flashover Voltage 250 V
Pins 3
Minimum Wire Size 0.75 mm²
Maximum Wire Size 1.5 mm²
Mechanical Specifications
Length (mm) 50 mm
Height (mm) 65 mm
Width (mm) 5 mm
Mounting Size 50 x 50 mm
Weight 0.06 kg
IP Rating IP44
Housing Plastic
Colour Blue
Product Properties
Pin Connection Screw Terminal
Contact Type Brass
|
These power distributors are cost-optimised powerhouses. Designed for everyday stage use, they provide a basic supply of conventional electricity requirements. The components have been selected based upon their fulfilment of the relevant safety requirements and a favourable price/performance ratio.
- 3 x indicator lamps for phase control L1, L2, L3
- Input via 32 A CEE panel mounted receptacles 5-pin red
- Output parallel to input 32 A CEE socket 5-pin red
- Protection via 3 x C16 circuit breakers
- Front output via 3 x panel mounted receptacles with hinged lids grey
- Rear output via 6 x panel mounted receptacles with hinged lids grey
- Quality Made in Germany
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
9 (3 x front, 3 x 2 rear)
Power input
32 A CEE 5-pole panel socket, red
Output parallel to input
32 A CEE 5-pole panel plug, red
Fuse
3 x C16 circuit breaker (C tripping characteristic : for higher switch-on power)
Other features
indicator lamp pro phase
|
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
|
WDP 163
RACK POWER SPLITTER 3φασικό 16A, PCE 61516A στην είσοδο, έξοδος με 6 πρίζες
σούκο με ασφάλεια, με αμπερόμετρα και βολτόμετρα η κάθε φάση, ασφάλεια σε κάθε φάση.
Βάρος 3,8kg.
|
Work LP-12S Controller
12 channels driver of 1.000 W. by channel with total load 6.000 W.
Dimensions: 483 x 44 x 23 mm. Weight: 1,2 kgs. | BreakoutBar 4
Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out
Powersplitter from CEE 16A 5 pole three phase to 6 schuko outputs (2 per phase). Also equipped with a CEE 16A 5 pole three phase for linking multiple splitters together.
Compact design. Sliding profile for easy mounting of clamps and safety-eyes. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.