Content | Ανταλλακτική βελόνα για κεφαλή πικάπ Awia SN-80 and more
High Quality Gamma Fines Needles aftermarket replacement turntable AIWA SANSUI AN8745 E and more
Specs:
Polished Spherical Diamond Tip 0.7mil
Tracking Force: 2.0 - 3.0 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: red
Fits the following models:
This stylus was used in the following turntables: CEC ST 730, ST 970, Columbia DSN 69, JHAP 592, Graetz AP 692, CA 655, ITT Schaub Lorenz ST 545, RP 592, Kenwood N 72, N 73, P 43, P 44, P 62, P 63, P 64, TAV 67, TAV 68, Mitsubishi LT 603, Sansui PD 10, PD 11, Teac N 313, Tensai TD 540 D, TD 5400, TD 880 B, TO 80, Toshiba N 17 D, SKV 22, SR V 22, SR V 32, Trio / Kenwood N 73, P 43, P 44, P 62, TAV 67, TAV 68, P 42
The stylus is used in the following turntable cartridges: Sansui SC60, SC80, Kenwood V61, V66, V72
Fits also for Sansui SN60, Kenwood N61, N66, N72 |
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
| Technical data
Output |
3,5 mV |
|
Frequency response |
10-25.000 Hz dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
30 µm/mN |
Stylus type |
Spherical |
Stylus tip radius |
R 15 µm |
Tracking force range |
1,25-1,75 g (12,5-1,75 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
Recommended for following cartridges |
Dual TKS 49S |
Recommended for following cartridges - Dual TKS 49 S
*) Typical value | DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-20.000 Hz Frequency response - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Spherical Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Stylus 2M Blue
Technical data |
| Frequency range | 20-25.000 Hz | Frequency response | 20-20.000 Hz + 2 / - 1 dB | Tracking ability at 315Hz at recommended tracking force *) | 80 µm | Compliance, dynamic, lateral | 20 µm/mN | Stylus type | Nude Elliptical | Stylus tip radius | r/R 8/18 µm | Equivalent stylus tip mass | 0,5 mg | Tracking force range | 1,6-2,0 g (16-20 mN) | Tracking force, recommended | 1,8 g (18 mN) | Tracking angle | 20° | Stylus colour | Blue |
| | Recommended for following cartridges | 2M Blue
| *) Typical value | DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.