Content |
Διοδικό αερόψυκτο Laser GBCRPP, 2 εξόδων, Red 150mW/ 650nm, Green 60mW/532nm, Blue 500mW/450nm. Scan N1.8 high precision stepper motor. Λειτουργεί με DMX 512 (12κανάλια) ή αυτόνομα με μουσική ή Auto. Διαθέτει 64 έτοιμα patterns. Κατανάλωση ενέργειας: 40W,τροφοδοσία: 110~220V, 50~60Hz. Διαστάσεις: 365x145x70mm. Βάρος: 3κιλά. Χρήσεις: Discos, Bars, Clubs. |
Description - The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
- Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
- Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
- The color of the beams changes all the time using laser blanking technology.
- Several working modes:
- DMX-control: 1channel for easy operation or 10 channels for full control
- Standalone: sound activated (internal mic) or automatic
- Master/slave: wonderful synchronized shows
- Optional CA-8 remote controller available
- Compatible with RF-DMX Converter:
* Set the Radiant laser to 1CH DMX-mode
* Set the RF-DMX Converter to MODE1 - Built-in microphone
- 3-digit LED display for easy menu navigation
- Optional CA-8 controller for additional functions available
- Key actuated on/off switch and emergency switch (interlock) input for additional safety
- Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information - Mains Input: AC 100~240V, 50/60Hz
- Fuse: 250V 1A slow blow (20mm glass)
- Total Power consumption: 30W
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 10 channels
- DMX starting address: 001 à 512
- Laser Power:
- 40mW Green CW laser (λ = 532nm)
- 200mW Blue CW laser (λ = 450nm)
- Laser radiation class: 3B
- Beam diameter @ aperture:
- Divergence (each beam)
- Divergence (total output)
- Working temperature: 15°C to 40°C
- Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
- Size: 25 x 24 x 19 cm
- Weight: 2,6kg
|
Fantastic laserburst effect using a 650nm 1000mW red and a 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 100mW Red CW laser (λ = 650nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg |
ILDA extension cable incl. screw lock 3 m
Product type
Laser Accessories
Connector 1
25-pin Sub-D male
Connector 2
25-pin Sub-D female
Colour
Black
Length
300 mm
Weight
0,24 kg
Features
incl. screw lock
|
Cameo D FORCE 3000 RGB
- 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
- Beam alignment without the need for servicing!
- Dust-proof aluminium casing for minimum maintenance
- 30 kpps high-speed galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precise beams with extremely low divergence for razor-sharp projections
- Interlock Out for sending the emergency switch-off signal
- Control via ILDA
- Scan Fail safety system
- Neutrik powerCON mains input and output
- Thermally activated fan for controlled operating temperature
- Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Laser sources
Laser diode
Scanner
30 kpps @ 8° ILDA
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.