Content | Product information "7025 HIGHGRADE TAD Premium Selected"
Warm, clean tone with creamy overdrive!
PREMIUM selected quality for the most demanding amp stages. This tube works greatly for warm clean tones and creamy overdrive. We recommend this tube for the 1st gain stage and as input tube. It upgrades 12AX7A and ECC83 tubes and replaces E83CC tubes.
All preamp tubes labeled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Balanced Output Test
The HIGHGRADE Selection is the tip-of-the-top quality at the lowest noise (microphony, hum, hiss) level. Tipically only 0,5-2% out of the whole production of this tube meet the HIGHGRADE requirements.
NOTE: due to extreme demanding TAD-Selection criteria, the availability of this tube is limited. Please check the information about availability.
The TAD 7025 Highgrade can replace any ECC83, E83CC, ECC803S, 12AX7, 12AX7A, 12AX7M, 12AX7WA/WB/WC/LPS/EH, 5751, 7025, CV492 and CV4004
equivalent (same built) for MESA® SPAX7-A
DISTINCTION from RT093-HG 7025WB and RT030 7025 / E83CC HIGHGRADE:
Compared to the RT030 and RT093-HG, the RT010 has a smoother overall responce and better linearity qualifiying for natural clean tones and relaxed HiFi audio listening. The RT093-HG shows a little more edge in the high-mid range. As a result, it asserts itself tonally very well, which makes perfect sense in a band structure.
RT030 is emphasising the midrange a bit more and thus brings more warmth and a little less brilliance and depth definition than the RT010 and RT093-HG.
Due to their tonal structure the RT093-HG and the RT030 are even less prone to microphonics than the RT010 which qualifies these for use with extremely microphonic-critical amps.
The RT010 has the lowest floor noise of these 3 which might be espicially important for use in tube microphones and audio system input stages.
HIGHGRADE SELECTION
But only those tubes which pass these tests best are labeled Highgrades.Typically this is approx. 3-10% from a production batch that qualifies for the HIGHGRADE rating from TAD.
Due to the very high selection requirements, this article is temporarily only available to a limited extent! Please note our shop-information on availability.
Matching and Selecting Options for Preamp Tubes
Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.
This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems and all stereo applications.
TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties)
for the quality criteria mentioned above.
Tube Type: |
12AX7/ECC83/7025 |
Socket: |
Noval(9 Pin) |
Selection: |
Highgrade |
| Περιγραφή
Electro Harmonix 12AX7EH / ECC83
Εξαιρετική προενισχυτριά διπλή τριόδα υψηλού Gain (συντελεστής ενίσχυσης) χαμηλή σε μικροφωνισμούς , με μεγάλη έμφαση στις χαμηλές συχνότητες, ζεστή χροιά και μουσικό χαρακτήρα.
Description
NN095-Electro Harmonix 12AX7 / ECC83
Vacuum tube 12AX7ЕН, 12AX7SV is a miniature twin triode with equipotential cathodes, designed to amplify low frequency voltage in radio engineering devices. Top choice for gutiar / bass amp application with all the right ingredients. Excellent tonal bal-ance, harmonic content, low noise floor, and low microphonics. The tone is more vintage sounding, and also does very well in audiophile application. The 12AX7-EH tube has a nice balanced sound, a very low noise floor and excellent perfor-mance in terms of microphonics. The lack of microphonics is due in part to the return of a shorter plate structure and better materials.
- Bass Amplifier application
- Preferred by guitar technicians for re-tubing and upgrading, but equally well suited for HiFi applications
- High Gain, Low noise, low microphonics
- High Quality and Durable
- High Quality and Durable
- 12AX7 /7025 / ECC83 equivalent
- Made In Russiα
Tube Type: |
12AX7/ECC83/7025 |
Socket: |
Noval(9 Pin) |
| Product information "ECC81 / 12AT7-Cz TAD Premium Selected (balanced)"
The TAD ECC81 / 12AT7-Cz is selected with regards to a tight balance of both triodes making it ideal for the use as BALANCED PHASE DRIVER. In addition to the perfect symmetrical systems, the strong amplification characteristics of the TAD ECC81 / 12AT7-Cz support increased dynamics of the output stage when used as phase driver or phase inverter tube.
All preamp tubes labeled Premium Selected have passed the following tests:
- Low Noise Test
- Microphonic Test
- Gain Test
- Sonic Tests
- Shock Tests
- Listening Tests
- Balanced Output Test
Matching and Selecting Options for Preamp Tubes
Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.
This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems.
TAD Premium Selected/Highgrade tubes are guaranteed for a period of 6 months (according to terms of warranties)
for the quality criteria mentioned above.
Tube Type: |
12AT7/ECC81/6201 |
Socket: |
Noval(9 Pin) |
Selection: |
Premium |
| JJ ELECTRONICS TAD EL34-4 Λυχνία ενίσχυσης 4 MATCHED-ΤΕΤΡΑΔΑ
The TAD JJ EL34 Quartett Matched Tubes
EL34 is an octal power tube with a maximum plate power of 25W. Very robust and reliable due to its internal construction.
The JJ Electronic EL34 is another classic from JJ.
This tube features a rugged construction leading to an incredibly reliable EL34 with astonishing tone.
Overall the sound is nicely balanced with tight lows, a rich and dynamic mid range and clear highs.
The JJ EL34 is a great replacement for guitar amplifiers and stereo amps.
- 6CA7, E34L, EL34 Equivalent
- Made In Slovak Republic
Base: OCTAL uf = 6,3 V I f = 1,5 a Typical Characteristics: ua = 250 V ug3 = 0 V ug2 = 265 V ug1 = from -10 to -13,5 V (for eL34) from -13,5 to -16,5 V V (for e34L) I a = 100 ma I g2 = 14,9 ma S = 11 ma/V R i = 15 kΩ μ g2/g1 = 11
Limiting Values: ua0 = 2000 V ua = 800 V W a(max) = 25 W ug20 = 800 V ug2 = 450 V W g2(max) = 8 W I k = 150 ma uk/f = 100 V R k/f = 20 kΩ Capacitances: c g1 = 15,5 pf c a = 10 pf c a/g1 = 1,3 pf |
Λυχνία ανόρθωσης.
The Bugera 5U4 Rectifier Preamp Tube delivers the unique distortion, tone and warmth associated with the coveted Rectifier guitar amplifier. The 5U4 is ideal for both medium and high powered amplifiers due to its low heat dispersion. The tube easily replaces any tubes installed in Bugera guitar amplifiers.
Product Highlights - Replacement Tube For Bugera Amplifiers
- Ideal for Medium and High Power Amps
- Low Heat Dispersion
|
double-triode 6N1P-EV / 6H1Pi, close to ECC88, 6DJ8, 6922
EXTRA-durable, long-life (-EV version), military equipment.
Tubes are made in 1980s. Tubes not used (new)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.