Tapco J1400 – ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x450W-4Ω

ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x450W-4Ω

? 2X310 RMS@8Ω ? 2x450W RMS@4Ω. Απόκριση συχνοτήτων 25Hz-25kHz, Signal to Noise ratio 100dB, Απολαβή 30dB, προστασία Overload, thermal protection.

Βάρος 22kg

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Power Bandwidth
- 5 Hz to 50 kHz (+0, -3 dB)
Frequency Response
- 25 Hz to 25 kHz (+0, -1 dB)

Distortion
THD and SMPTE IMD; 20Hz to 20kHz < 0.03% @ 8 ohms

Signal-to-Noise Ratio
> 100 dB below rated power into 4 ohms

Channel Separation
> 90 dB @ 1 kHz

Damping Factor
> 300 @ 1 kHz and below

Gain

J?1400: 32 dB

Topology

Class AB

Subsonic Filter
9 dB @ 30 Hz

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 1800 W, 4 Ω - 1200 W, 8 Ω - 750 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 3400 W, 4 Ω - 1800 W, 8 Ω - 950 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 3600 W, 8 Ω - 2400 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +6.6 dBu (1.66 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class H Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 17.7 kg (39.0 lbs)

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 1200:  2x 600 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  15 kg.
Dimensions : 2 RU / 483 x 88 x 454 mm (19" x 3.5" x 17.9“)

Τελικός ενισχυτής 2 Χ 750 WATTS στα 4Ω, με ενσωματωμένο limiter, είσοδοι cannon και jack 1/4 TRS, έξοδοι ηχείων speakon & binding post διάστασης 2U. Βάρος 20,2 Kg.

• Ισχύς Εξόδου : 750W @ 4 Ohms stereo, 500W @ 8 Ohms stereo
• Τοροειδής μετασχηματιστές για μεγαλύτερη ισχύ και χαμηλότερο θόρυβο
• Φίλτρο υψηλών συχνοτήτων με επιλογή 30Hz ή 50Hz
• Είσοδοι XLR & 1/4\' TRS Jack
• Έξοδοι ηχείων με βύσμα speakon
• Aνεξάρτητα ρυθμιστικά έντασης για το κάθε κανάλι στην πρόσοψη
• Ενδεικτικά LED σήματος & peak για ακριβή παρακολούθηση της λειτουργίας του ενισχυτή
• Θερμική και RF προατασία
• Διακόπτης on/off (power)

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The 2U amplifier provides 2x550W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

Number of Channels: 2

Output Power: (per channel)

8 ohms     450W
4 ohms  850W
2 ohms 1550W



Output Power: (bridged)

8 ohms 1700W
4 ohms 3100W


THD%: (@1dB below max output)

@ 1kHz