Content |
ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x450W-4Ω
? 2X310 RMS@8Ω ? 2x450W RMS@4Ω. Απόκριση συχνοτήτων 25Hz-25kHz, Signal to Noise ratio 100dB, Απολαβή 30dB, προστασία Overload, thermal protection.
Βάρος 22kg
ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
Power Bandwidth - 5 Hz to 50 kHz (+0, -3 dB) Frequency Response - 25 Hz to 25 kHz (+0, -1 dB)
Distortion THD and SMPTE IMD; 20Hz to 20kHz < 0.03% @ 8 ohms
Signal-to-Noise Ratio > 100 dB below rated power into 4 ohms
Channel Separation > 90 dB @ 1 kHz
Damping Factor > 300 @ 1 kHz and below
Gain
J?1400: 32 dB
Topology
Class AB
Subsonic Filter 9 dB @ 30 Hz |
Τελικός ενισχυτής 2 Χ 750 WATTS στα 4Ω, με ενσωματωμένο limiter, είσοδοι cannon και jack 1/4 TRS, έξοδοι ηχείων speakon & binding post διάστασης 2U. Βάρος 20,2 Kg.
- Ισχύς Εξόδου : 750W @ 4 Ohms stereo, 500W @ 8 Ohms stereo
- Τοροειδής μετασχηματιστές για μεγαλύτερη ισχύ και χαμηλότερο θόρυβο
- Φίλτρο υψηλών συχνοτήτων με επιλογή 30Hz ή 50Hz
- Είσοδοι XLR & 1/4\' TRS Jack
- Έξοδοι ηχείων με βύσμα speakon
- Aνεξάρτητα ρυθμιστικά έντασης για το κάθε κανάλι στην πρόσοψη
- Ενδεικτικά LED σήματος & peak για ακριβή παρακολούθηση της λειτουργίας του ενισχυτή
- Θερμική και RF προατασία
- Διακόπτης on/off (power)
|
Όμοια χαρακτηριστικά με τον V-2000 αλλά με ισχύ 2Χ550W/4Ω, 2Χ300W/8Ω, 2Χ900W/2Ω, bridge 1900W/4Ω, 10,5Kg. |
Επαγγελματικός τελικός ενισχυτής 2x700W RMS @ 4Ω, 2x500W RMS @
8Ω. Διαθέτει εισόδους RCA (unbalanced), 3‐pin XLR και jack 6,3mm
(balanced), εξόδους speakon combo (για speakon και jack 6,3mm) και
μπόρνες. Τέλος διαθέτει crossover switch (100Hz low pass στο κανάλι 1
και high pass στο κανάλι 2). Προστασίες short circuit, open circuit,
υπερθέρμανσης, RF και DC faults. Διαστάσεις (HxWxD) 89x483x257mm ‐
12,6kg.
|
Τελικός ενισχυτής 2U ισχύος 2 Χ 750 Watt/4Ω με απόκριση συχνότητας 20Hz - 20KHz. Βάρος 19 Kg. Διαθέτει ρύθμιση ευαισθησίας εισόδου (0,775V/1,0V/1,44V), Limiter και φίλτρα Low pass & High pass για σύνδεση με sub ή δορυφόρο. Διαθέτει εισόδους balanced XLR/JACK και εξόδους ηχείων σε Speakon & Binding post | The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment.
In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep.
• Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility.
Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB)
DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration.
Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon)
OUTPUT POWER |
S-1500 |
S-2000 |
S-3000 |
S-4000 |
S-6000 |
S-3004 |
S-4004 |
S-4044 |
S-6004 |
S-6044 |
1kHz, 1.0% THD |
2 ohms |
2x880W |
2x1190W |
2x1570W |
2x1950W |
2x2950W |
4x700W |
4x980W |
- |
4x1440W |
- |
4 ohms |
2x575W |
2x790W |
2x1100W |
2x1380W |
2x2025W |
4x500W |
4x670W |
4x975W |
4x1000W |
4x1480W |
8 ohms |
2x325W |
2x460W |
2x630W |
2x810W |
2x1250W |
4x300W |
4x430W |
4x690W |
4x620W |
4x1015W |
Bridge @ 4ohms |
1760W |
2380W |
3140W |
3900W |
5900W |
2x1400W |
2x1960W |
- |
2x2880W |
- |
Bridge @ 8ohms |
1150W |
1580W |
2200W |
2760W |
4050W |
2x1000W |
2x1340W |
2x1950W |
2x2000W |
2x2960W |
P. N. 12dB C.F. |
2 ohms |
2x975W |
2x1360W |
2x2060W |
2x2460W |
2x4225W |
4x890W |
4x1170W |
- |
4x2080W |
- |
4 ohms |
2x610W |
2x880W |
2x1240W |
2x1600W |
2x2600W |
4x580W |
4x820W |
4x1230W |
4x1280W |
4x2110W |
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs
Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™ |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.