THE T.RACKS DBMETER 1U With Led Indicators

• For rack mounting
• Measures the decibel level of the sum signal
• Produces interesting lighting in your amplifier rack
• LED indicator changes from green to yellow
• Sensitivity adjustment for right and left channel
• 2 Separate LED modes: dot and bar
• Demo mode for activating the LED without audio signal
• High level inputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission
• High level outputs: RCA jacks left / right and XLR jacks left / right for balanced signal transmission
• Power consumption: 10 W
• Dimensions (L x W x H): 483 x 44.5 x 44.5 mm
• Weight: 0.85 kg
• Includes power supply unit 12 V DC 500 mA

Palmer Pro MCT DMX 3-pin and 5-pin DMX and XLR cable tester MCT DMX This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unitʼs 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options.

• Tests 3-pin and 5-pin DMX cables for continuity
• Also tests 3-pin XLR microphone cables
• Automatic test mode or manual pin 1 - 5 selection
• LED indicators
• Mounting brackets included

Cable Tester ACT-100

The Alphaton active remote cable tester can be used for testing either normal short
cables or long ones, especially mufticores, wkh connectors not being accessible at
one time. The tester is especially suded for fixed installations where cables can not
be tested with a standard type cable tester or Ohm meter. Either symmetric and
unsymmetric cables can be tested.
“Cold" solderings and junction resistances are displayed by color or luminosity changes
in three color LED Display. The imprinted fault table incorporates alt important fault
conditions, indeed not all possible ones due to their reiatively large number. In case the
display is in a state which cannot be found on the imprinted table, it can be looked up in
the user's manual. In any case, however, the cabie is in aquite unusable state and should
be repaired or replaced.The Alphaton cable tester has a SEND and a REMOTE section.
The REMOTE sectionconsistsof two recessed mounted XLR type male or female connector
and a stereo phone jack at the right hand side of the tester. Additionally, a separate REMOTE
plug is delivered togetherwith the active remote cable tester for testing long cables in fixed
installations.

Tester καλωδιώσεων με αυτόματη ένδειξη οχτώ σημείων, σασσί δύο τμημάτων για έλεγχο δομημένης καλωδίωσης γεννήτρια θορύβου, tester με beeper και led ενδεικτικό με την χρήση banana connectors, ελέγχει DMX (5-pin), BNC RCA, XLR (αρσενικό /θηλυκό) 3 επαφών, MIDI (5-pin DIN), speakon 4 επαφών, 1/4? (6.3mm) TRS/TS, RJ45, 1/8" (3.5mm) TRS/TS.

The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.

• Tests up to 8-pin cables
• 2 piece chassis for testing installed cables
• Test Tone Generator
• Allows connection between different format connectors with ease
• ʽBananaʼ connector continuity tester with beeper and LED indicator
• Super-rugged construction for durability and longer life
• (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
• (2) BNC connectors for testing of 2 pin->to pin connections
• (2) RCA Phono connectors for testing of 2 pin->to pin connections
• (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
• (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
• (2) Speaker Twist connectors for testing of 4 pin->to pin connections
• (2) Banana connectors for testing of 1 pin->to pin connections
• (2) 1/4” (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections
• (2) RJ45 connectors for testing of 8P8C modular connections
• (2) 1/8” (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections

• Measures impedance of speaker lines up to 100k ohms
• Batteries: four (AA)
• Zero adjustment for accuracy on all ranges
• Easy to read meter calibrates directly in ohms
• Includes carrying case, test leads and impedance to power reference chart
• Five year warranty

Cable tester για τον έλεγχο καλωδίων, διαθέτει περιστροφικό επιλογέα έξι θέσεων για έλεγχο έως και 5 pins καθώς και έλεγχο της εσωτερικής μπαταρίας, tester με led ενδεικτικά και buzzer με την χρήση banana connectors, ελέγχει speakon 4 επαφών, XLR (αρσενικό /θηλυκό) 3 επαφών, RCA, ΒΝC, MIDI (5-pin DIN), DMX (5-pin), 1/4? TRS.

This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.

We all know how frustrating and time consuming it can be when your audio cables fail. With the dbx CT2 cable testing unit you can now evaluate a large variety of your cables with ease. The CT2 offers many common connectors such as Speaker Twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, & Banana. The CT2 allows for testing cables even with different connectors at each end. For example, it is simple to test a TRS to XLR cable. With well illuminated LED indicators and a simple rotary dial, users can quickly establish whether a cable is wired and functioning correctly, or if it is dead and in need of repair.

• 6-position rotary selector with individual LEDʼs for up to five pins plus internal battery life check
• ʽBananaʼ connector continuity tester with beeper and LED indicator
• Super-rugged construction for durability and longer life
• (2) Speaker Twist connectors for testing of 4 pin->to pin connections
• (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
• (2) RCA Phono connectors for testing of 2 pin->to pin connections
• (2) BNC connectors for testing of 2 pin->to pin connections
• (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
• (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
• (2) 1/4” TRS connectors for testing of 3 pin->to pin connections
• (2) Banana connectors for testing of 1 pin->to pin connections