Content | Original replacement stylus Ortofon M 200E for Thorens D 200E
- Quality: Genuine stylus 100% Original
- Stylus-name: DN 200 E
- Material: diamond, nude
- Stylus-type: elliptical .0003 x .0007 inch radii for precision tracing accuracy
- Tracking force, recommended: 0,5g-1,2g
- Cartridge: D200E
The Ortofon D 200 E D200E stylus is used with the Ortofon M200E M-200E phono cartridge.
Unlike the original stylus which has a nude elliptical, the replacement stylus featured above offers a highly polished special elliptical diamond with a .0003 x .0007 inch scanning radii.
It is mounted on a thin-wall metal alloy Zualum cantilever for natural sound quality, long playing life and very good rendition of voice and music.
Please note: The M200E cartridge was installed in the Thorens TPO63 and TPO70 tonearm wands also known as miniature cartridge wands. These wands were used with the Thorens TD 110, TD 115 & TD 115 MK II turntables.
Compatible with 5E, 10, 78, DN 165E, Ortofon 30, ortofon 20
|
Stylus 78
Technical data |
| Frequency range | 20-15.000 Hz | Frequency response | 20-12.000 Hz + 2 / - 3 dB | Tracking ability at 315Hz at recommended tracking force *) | 60 µm | Compliance, dynamic, lateral | 15 µm/mN | Stylus type | spherical
| Stylus tip radius | 65µm | Equivalent stylus tip mass | 0,5 mg | Tracking force range | 1,75-2,25 g (17,5-22,5 mN) | Tracking force, recommended | 2,0 g (20 mN) | Tracking angle | 20° | Stylus colour | Black |
| | Recommended for following cartridges |
All Super OM, OM, OMP, TM, Concorde cartridges for playing 78 r.p.m. records
| *) Typical value |
Ortofon 310 Ανταλλακτική βελόνα
Ortofon 310 Stylus Technical Data
Frequency range 20-20.000 Hz
Frequency response 20-18.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 60 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Stylus colour Grey
Recommended for following cartridges Series 310 Universial |
| Stylus 2M Red
Technical data |
|
Frequency range |
20-22.000 Hz |
Frequency response |
20-20.000 Hz + 3 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,6-2,0 g (16-20 mN) |
Tracking force, recommended |
1,8 g (18 mN) |
Tracking angle |
20° |
Stylus colour |
Red |
|
|
Recommended for following cartridges |
2M Red |
*) Typical value | DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-20.000 Hz Frequency response - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Spherical Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S | Bελόνα Πικάπ για την κεφαλή της Νumark CC-1 |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.