TOA SR-H2S Ηχοστήλη Line Array 180W (Ασπρο)

The SR-H2S Line Array Speaker forms a linear sound source by the internal speaker units arrayed vertically in close proximity. It can be used for high-impedance applications with the installation of the optional MT-S0301 Matching Transformer.

Specification  Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Ω
Sensitivity 90 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 90 - 17,000 Hz (when using an optional digital processor)
Directivity Angle Horizontal: 90゜, Vertical: 20゜
Speaker Component 7 cm (2.8“) cone-type × 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 663.4 (H) × 115 (D) mm (3.31" × 26.12" × 4.53“)
Weight 4.2 kg (9.26 lb)
Option Matching transformer: MT-S0301
Extension plate: SR-EP3
Wall mounting bracket: SR-WB3
Wall tilt bracket: SR-TB3
Flying bracket: SR-FB3
Stand adapter: SR-SA3 (Applicable stand: ST-33B)
Digital processor: DP-0206

Ηχείο υψηλής ποιότητας 2 δρόμων, 1'' dome tweeter 2 x 5.25'' LF, 450W program 16Ω. Κωνική διασπορά 90x90, απόκριση 90Hz-18kHz (±3dB). Dual Neutrik NL4 connectors, σημεία σύνδεσης για προαιρετική χρήση U-bracket. Ξύλινη καμπίνα με επένδυση ειδικής βαφής DuraFlex για μεγαλύτερη αντοχή. Κατάλληλο για χρήση cafe, bar χώρους λατρείας και αθλητικών εκδηλώσεων. Χρώμα μαύρο. Διαστάσεις 377.8Η x 150.3W x 177.8D mm. Βάρος 7,5 kg

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.

Order No. D 113 127 Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish Black 2-component paint Grille Powder coated steel, acoustic foam

Ηχείο 2 δρόμων μικρού μεγέθους, 5.25 woofer, 0.75 polycarbonate tweeter θόλου, 150WRMS, 4Ω με προστασία υπεροδήγησης, 120Hz - 20kHz ±3dB, 87dBSPL/1W/1m. Καμπίνα πολυπροπυλενίου, μαγνητική θωράκιση, μαύρου χρώματος. Τιμή ανά τεμάχιο. (235H x 159W x 143D mm). Συσκευασία 2 τεμ. Βάρος 1, 8 Kg. Συνοδεύεται από βάση τοίχου.

 ΤΙΜΗ ΤΕΜΑΧΙΟΥ

Specifications :
       
   

    150 Watts Continuous Power Handling
    Professional Drivers and Crossover Network
    Included Mounting Bracket
    Transparent and Faithful Sonic Performance
    Magnetically Shielded Transducers
    SonicGuard™ Overload Protection
    Available in Black or White Finishes
       
       

Frequency Range
(-10 dB)
    :    

80 Hz to 20 kHz

Frequency Response
(± 3 dB)
    :    

I00 Hz - 18 kHz

Power Capacity
    :    

I50 W

Sensitivity
    :    

87 dB SPL, 1 W, 1 m (3.3 ft)

Maximum SPL
    :    

108 dB continuous, 114 dB peak

Directivity Factor (Q)
    :    

6.0

Directivity Index (DI)
    :    

7.8
Nominal Impedance     :    

4 ohms
Crossover Frequency     :    

4.2 kHz
Overload Protection     :    

Full-range SonicGuard™ power limiting to protect network and transducers

Transducers
       
LF Drivers     :    

135 mm (5.25 in) low
frequency loudspeaker
HF Drivers     :    

19 mm (.75 in) polycarbonate
dome tweeter
Input Connectors     :    

Spring-loaded terminals

Enclosure
       
Enclosure Material     :    

Polypropylene Structural Foam
Finish     :    

Black (C1Pro) or White (C1Pro-WH)
Dimensions     :    

235 mm x 159 mm x 143 mm
(9.3 in x 6.3 in x 5.6 in)
Net Weight (each)     :    

1.8 kg (4 lb)
Shipping Weight (pair)     :    

4.6 kg (10 lb)
Included Accessories     :    

Mounting Bracket Assembly
Optional Accessories     :    

MTC-1A ultra-duty mount bracket
MTC-8 heavy-duty mounting bracket

Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.

Features:

• Frequency Response: 38 Hz - 20 kHz
• 100W continuous program (50W cont. pink, 200W cont.peak)
• 88 dB sensitivity (1W/1m)
• High-slope crossover network produces natural sound and even coverage.
• Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.

maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W continuous power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.