| Content |
Ηχοστήλη Line Array, bass-reflex, ισχύος 600W@8Ω (cont. program), 8x10cm cone-type LF, 24x2,5cm HF balanced dome-type, 94dB/1W/1M, Ηor.90°,Vert.0°. Ανοξείδωτο, αδιάβροχο, μαύρο χρώμα. (160W x 895H x 255D mm). 16kg.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 94 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 895 (H) × 255 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall mounting bracket: SR-WB4WP, Wall tilt bracket: SR-TB4WP,
Protection pad: SR-PP4, Digital processor: DP-0206 |
|
Ηχείο subwoofer line array για ανάρτηση ή ground-stacking. 2x15 2266H. 1600W, 2x8Ω, 32Hz-110Hz ±3dB, 95dB/1W/1m. πλήρως συμβατό με VT4888 σε συνδυασμό με VT4882-ACC accessory kit, με χρήση του VT4888-AF array frame δημιουργεί αμιγή συστοιχία subwoofer 24 μονάδων με 7:1 design factor. (457H x 1013W x 858D mm). 52kg. |
HX-5B
Line Array Stack τεσσάρων ηχείων, 2 δρόμων, bass-reflex, ισχύος
200W/600W@8Ω (cont.pink noise/cont. program), 4x12cm cone-type LF, 12xHF balanced dome-type.
99dB/1W/1M (15° mode), 85Hz-20KHz
(-10dB) (15° mode), Ηor.100ο, Vert. από 15° έως 60° επιλεγόμενα. Mαύρο χρώμα.
(408W x 546H x 342D mm). Δυνατότητα ανάρτησης. 16kg.
|
Ηχοστήλη Line Array, bass-reflex, ισχύος 600W@8Ω (cont. program), 8x10cm cone-type LF, 24x2,5cm HF balanced dome-type, 93dB/1W/1M, Ηor.90° ,Vert.10°. Ανοξείδωτο, αδιάβροχο, μαύρο χρώμα. (160W x 892H x 303D mm). 16kg.
| Enclosure | Sealed type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 93 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 10゜ | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm,
conductor cross section: 1.25 m㎡, 4-core cable, 3 m | | Operating Temperature | -10℃ to +50℃ | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, white, urethane coating
Front grille: Punched stainless steel (SUS304), white, paint | | Dimensions | 160 (W) × 892 (H) × 303 (D) mm (excluding connected cable) | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4WP,
Wall tilt bracket: SR-TB4WP, Protection pad: SR-PP4,
Digital processor: DP-0206 |
|
A very compact, active, two-way line array loudspeaker module that delivers extraordinary power handling, clarity, flexibility and great sound in a compact, easy to handle and affordable package.
The 750 Watt Class-D Digipro amplifier module accurately matches the high quality analogue signal input board with precise, complex filter response that result in the natural, detailed reproduction of the best radiating designs.
The NX L23-A is the ideal choice when line array performance is needed and a fast and easy set up is a must.
| Features |
|---|
| 750 Watt Digipro digital amplifier | | 133 dB max spl | | 100 x 15, Wide dispersion constant directivity angle | | 12" woofer, high power neodymium 3.5" voice coil | | 3 x 1" HF driver, titanium dome, neodymium 1.75" voice coil | | PFC power factor correction |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 60 Hz | ÷ 20 kHz | | Max SPL: | 133 dB | | | Horizontal coverage angle: | 100° | | | Vertical coverage angle: | Max 15° | | | Compression Driver: | 3 x 1" neo, 1.75" v.c. | | | Woofer: | 12" neo, 3.5" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1300 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, hf correction cluster size | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / foced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | Arry side fittings | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 346 / 13.62 mm/inch | | | Width: | 659 / 25.94 mm/inch | | | Depth: | 415 / 16.33 mm/inch | | | Net Weight: | 28.5 / 62.83 Kg/Lbs |
|
JBL VRX 932LA 12'' 2-way 800W RMS Line Array Loudspeaker System
Key Features :
Constant Curvature Array - The waveguide mounts three compression drivers on a
continuous arc enabling them to work together acoustically as if they were a single driver.
Amplitude Shading- Convenient series of switches on each enclosures that controls
the output of each high frequency section in the array.
Suspension and Rigging.
Dual Angle Pole Socket - JBL's dual angle pole sockets
allow great flexibility in aiming the enclosure.
Differential Drive?? Woofer.
Specifications:
|
Frequency Range
|
:
|
57 Hz - 20 kHz(-10 dB)
| |
Frequency Response
|
:
|
75 Hz - 20 Hz (+/-3db)
| |
Coverage Pattern
|
:
|
100 x 15 nominal
| |
Crossover Modes
|
:
|
4 Ohms Bi-amp / passive,
externally switchable
| |
Crossover Frequency
|
:
|
132 dB SPL peak 1.2 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive: 800 W / 1600 W / 3200 W
Bi-amp LF: 800 W / 1600 W / 3200 W
Bi-amp HF 75 W / 150 W / 300 W
| |
System Maximum SPL
|
:
|
Passive: 130 dB SPL peak
Bi-amp LF: 130 dB SPL peak
| |
System Sensitivity (1w @ 1m
|
:
|
Passive: 95 dB SPL
Bi-amp LF: 95 dB SPL
Bi-amp HF: 114 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2262H 305 mm (12 in) neodymium magnet
Differential Drive?? with dual
voice-coils and magnetic gaps
| |
HF Driver
|
|
3 x JBL 2407J, 25.4 mm (1.0 in)
voice-coil, neodymium magnet
compression driver
| |
Nominal Impedance
|
:
|
Passive: 8 ohm
Bi-amp LF: 8 ohm
Bi-amp HF: 8 ohm
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
18 mm, 11-ply birch plywood
| |
Suspension / Mounting
|
:
|
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit
| |
Finish
|
:
|
Black DuraFlex??? finish
| |
Grille
|
:
|
Power coated, black, 16-guage perforated steel with with acoustically transparent foam
| |
Input Connectors
|
:
|
Neutrik?? Speakon?? NL-4 (x2)
| |
Dimensions (H x W x D)
|
:
|
349 x 597 x 381 mm
(13.75 x 23.5 x 15.0 in)
| |
Net Weight
|
:
|
21.8 kg (48 lb)
| |
Optional Accessories
|
:
|
VRX932LA-AF: Suspension array frame
SS2-BK: Tripod speaker stand
SS3-BK: Satellite speaker pole,
41 in (1041 mm)
SS4-BK: Adjustable satellite speaker pole to be used with the SRX718S only
|
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.