Content |
The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.
Power Source | 230 V AC, 50/60 Hz | Power Consumption | 600 W (with rated output signal), 260 W (according to EN60065) | Rated Output | 240 W | Frequency Response | 50 Hz - 20 kHz, ±3 dB (at 1/3 rated output) | Distortion | 0.7 % or less (at rated output, 1 kHz) | S/N Ratio | 85 dB or more | Input | External amplifier input: 100 V line, removable terminal block (14 pins) | Output | Speaker output 1 - 2: Max. (240 W) per output
Speaker output 3 - 6: Max. (120 W) per output
Speaker output 1 - 6: Total within 240 W, removable terminal block (14 pins)
Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection
Direct output: Direct output from internal or external amplifier,
removable terminal block (16 pins) | VM Link | Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connector
Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector
Maximum distance: 800 m (874.89 yd)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | EXT PA Link | Connecting the VP-2241, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | General Control | Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, removable terminal block (14 pins)
Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,
operating current: 10 mA or less, removable terminal block (14 pins) | Emergency Control | Input 1 - 5: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,
RJ45 female connector
Status out: Relay contact output, withstand voltage: 40 V DC,
operating current: 2 - 300 mA, RJ45 female connector | ATT Control | Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A,
removable terminal block (16 pins) | Power Input/Output | Power in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC)
PS out: 28 V DC/18 A
M4 screw terminal, distance between barriers: 11 mm (0.43“) | DC24V Output | 24 V DC, Maximum feeding current 0.3 A | Ds Link | Connecting the VX-2000DS, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | Operating Temperature | -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F) | Operating Humidity | 5 % to 95 %RH (no condensation) | Finish | Panel: Aluminum, hairline, black
Case: Surface-treated steel plate, black, paint | Dimensions | 482 (W) × 132.6 (H) × 407 (D) mm (18.98" × 5.22" × 16.02“) | Weight | 16.5 kg (36.38 lb) | Accessory | Power cable (2 m (6.56 ft)) …1, Link cable (3 m (9.84 ft)) …2,
Plastic foot …4, Plastic foot mounting screw …4,
Removable terminal plug (14 pins) …3, Removable terminal plug (16 pins) …1 |
|
Τελικός ενισχυτής 4Χ250W/4Ω, δυνατότητα bridge λειτουργίας (500W /8Ω), είσοδοι balanced με phoenix connectors, έξοδοι barrier strip, ύψος 1U, δυνατότητα για 4 διαφορετικές εισόδους. Με μετασχηματιστή γραμμής 100V για σταθερού voltage εγκαταστάσεις. 6,8Kg.
- 4x 250W (4 ohms) / 170W (8 ohms)2x 500W bridged mode (8 ohms)
- Limiter
- Class D design – 85% efficient!
- 30% lower power consumption than conventional amplifiers
- Compact, single rack-space design
- Stack up to 5 units without open spaces between units
- Lightweight (14.6 lbs.)
- Independent power supply for each channel
- Low heat dissipation
- Recessed stepped attenuators
- Comprehensive protection circuitry
- Removable dust filters for easy maintenance
- Optional 250W isolation transformer, model MT-250H (DA-250FH only)
|
Crown CDi 1000 2x700W-4Ω Τελικός Ενισχυτής
Τελικός ενισχυτής 2 Χ 700W στα 4 Ω και 2 Χ 500W 70 V/ 100 V. Μέ οθόνη LCD στη πρόσοψη ειδικός ενισχυτής για 100 βολτικά συστήματα πολλαπλών και σύνθετων εγκαταστάσεων. |
Ενισχυτής 5 μεγαφωνικών ζωνών, 120W [RMS] 100V 6 μικροφώνων, τροφοδοσία phantom, EQ 5 περιοχών 1 mic priority, τόνος chime, remote control power, δυνατότητα τοποθέτησης των module pam cd., pam tuner, βάρος 17 kg. Κατάλληλος για ναούς, ξενοδοχεία , καταστήματα κ.λ.π. |
Ενισχυτής 5 μεγαφωνικών ζωνών, 240W [RMS] 100V 6 μικροφώνων, τροφοδοσία phantom, EQ 5 περιοχών 1 mic priority, τόνος chime, remote control power, δυνατότητα τοποθέτησης των module pam cd, pam tuner, βάρος 19 kg. Kατάλληλος για ναούς, ξενοδοχεία, καταστήματα κ.λ.π.
|
PAM-510
|
PAM-520
|
Amplifier Section
(Amp In@1kHz,
4Ω Load Output)
|
Rated Output Power (THD 1%)
|
120W(RMS)
|
240W(RMS)
|
Speaker Zone 1~5 Output
|
25W MAX
|
50W MAX
|
Input Sensitivity/Impedance
|
1V/20kΩ
|
S/N
|
Better than 85dB
|
Frequency Response
(at 1kHz Half Power Output, ±3dB)
|
80Hz~18kHz
|
Mic Input Section
(Mic 1~4 In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
–60dBV/600Ω
|
S/N
|
Better than 55dB
|
Frequency Response (±3dB)
|
120Hz~10kHz
|
Tone Control
(Bass:100Hz,Treble:10kHz)
|
±12dB
|
Phantom Power
|
+24VDC
|
Line Input Section
(Line 1~2 In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
–30dBV/10kΩ
|
S/N
|
Better than 65dB
|
Frequency Response (±3dB)
|
80Hz~15kHz
|
Tone Control
(Bass:100Hz,Treble:10kHz)
|
±12dB
|
Remote Amp Section
(Remote In@1kHz,
Preamp Out)
|
Mic Input Sensitivity/Impedance
|
–60dBV/600Ω
|
S/N
|
Better than 55dB
|
Frequency Response (±3dB)
|
120Hz~10kHz
|
Tel In Section
(Tel In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
0.3V/600Ω(USA/Canada)
|
0.775V/600Ω(EC & Associated)
|
S/N
|
Better than 65dB
|
Frequency Response (±3dB)
|
330Hz~3kHz
|
Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)
|
0dBV/600Ω
|
|
T.H.D
|
Less than 0.5%
|
Record Out
|
–10dBV/3kΩ
|
Operating Temperature
|
–10°C~40°C
|
Power Source
|
100–120VAC or 220–240VAC; 50/60Hz, 24VDC
|
Power Consumption (1/8 POWER)
|
180W
|
320W
|
Weight
|
17kg/37.6lb
|
19kg/42lb
|
Dimensions
|
482(W) x 132(H) x 398(D)mm
19(W) x 5.2(H) x 15.7(D)in
|
※ Specifications and design subject to change without notice.
|
|
XB Series - Intelligent Power
Power Without Compromises. The XV is designed for paging, music and alarm signals. Versatile, dynamic and extremely rugged according to IEC286-3. For the highest requirements in safety and quality. Sequential power on, alive contacts and incorporated ground fault detection - the XV is the solution under all conditions. Without the need for additional equipment. For uninterrupted and troublefree operation. Needless to say that the Bittner High-End toroidal output transformers in the XV series are some of the best available.
High Tech SMT Design Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay PHOENIX High-End Toroidal Output 100V Transformers Ground Fault Detection LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT Temperature controlled, variable speed low noise fans Volume Controls at the back Stereo / Bridged / Parallel Mode Softstart Sequential Remote Power On Alive Contact Ground Lift 3 Years Warranty
TECHNICAL DATA: XV 400: 2x 200 W / 100 V Class: AB Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB) THD: < 0.07% Signal-to-Noise Ratio: < 101 dB Channel Seperation: > 70 dB Input Sensitivity: +6 dBu Input Clipping: 22 dBu Input Impedance: 20 kOhm Cooling: 2 to 3 fans (temp. reg. variable speed) Weight: 17 kg Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.