TOA VM-3240E VM Extension Amplifier 240W

1,392.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: VM-3240E Κατηγορία:
The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures. Specification Power Source 230 V AC, 50/60 […]

 

Διαβάστε περισσότερα

The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.

Specification
Power Source 230 V AC, 50/60 Hz
Power Consumption 600 W (with rated output signal), 260 W (according to EN60065)
Rated Output 240 W
Frequency Response 50 Hz – 20 kHz, ±3 dB (at 1/3 rated output)
Distortion 0.7 % or less (at rated output, 1 kHz)
S/N Ratio 85 dB or more
Input External amplifier input: 100 V line, removable terminal block (14 pins)
Output Speaker output 1 – 2: Max. (240 W) per output
Speaker output 3 – 6: Max. (120 W) per output
Speaker output 1 – 6: Total within 240 W, removable terminal block (14 pins)
Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection
Direct output: Direct output from internal or external amplifier,
removable terminal block (16 pins)
VM Link Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connector
Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector
Maximum distance: 800 m (874.89 yd)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
EXT PA Link Connecting the VP-2241, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
General Control Input 1 – 8: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, removable terminal block (14 pins)
Output 1 – 8: Isolated open collector output, withstand voltage: 30 V DC,
operating current: 10 mA or less, removable terminal block (14 pins)
Emergency Control Input 1 – 5: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,
RJ45 female connector
Status out: Relay contact output, withstand voltage: 40 V DC,
operating current: 2 – 300 mA, RJ45 female connector
ATT Control Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A,
removable terminal block (16 pins)
Power Input/Output Power in: Connecting the VX-2000DS only (operating range: 20 – 40 V DC)
PS out: 28 V DC/18 A
M4 screw terminal, distance between barriers: 11 mm (0.43“)
DC24V Output 24 V DC, Maximum feeding current 0.3 A
Ds Link Connecting the VX-2000DS, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 5 % to 95 %RH (no condensation)
Finish Panel: Aluminum, hairline, black
Case: Surface-treated steel plate, black, paint
Dimensions 482 (W) × 132.6 (H) × 407 (D) mm (18.98″ × 5.22″ × 16.02“)
Weight 16.5 kg (36.38 lb)
Accessory Power cable (2 m (6.56 ft)) …1, Link cable (3 m (9.84 ft)) …2,
Plastic foot …4, Plastic foot mounting screw …4,
Removable terminal plug (14 pins) …3, Removable terminal plug (16 pins) …1
Βάρος 16.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “TOA VM-3240E VM Extension Amplifier 240W”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

TOA VM-3240E VM Extension Amplifier 240W removeTOA CA-160 ΕΝΙΣΧΥΤΗΣ ΑΥΤΟΚΙΝΗΤΟΥ 60W removeTOA DA-250FH CE Τελικός ενισχυτής 4Χ250W/4Ω removeTOA A-2240 ΕΝΙΣΧΥΤΗΣ PA 240 WRMS 100V removeTOA A-1812 Ενισχυτής Public Address 120W/100V removeCROWN 135MA ΕΝΙΣΧ.3-IN,1X35W,8Ω,70V/100V remove
NameTOA VM-3240E VM Extension Amplifier 240W removeTOA CA-160 ΕΝΙΣΧΥΤΗΣ ΑΥΤΟΚΙΝΗΤΟΥ 60W removeTOA DA-250FH CE Τελικός ενισχυτής 4Χ250W/4Ω removeTOA A-2240 ΕΝΙΣΧΥΤΗΣ PA 240 WRMS 100V removeTOA A-1812 Ενισχυτής Public Address 120W/100V removeCROWN 135MA ΕΝΙΣΧ.3-IN,1X35W,8Ω,70V/100V remove
Image
SKUVM-3240ECA 160DA-250FH CEA-2240A-1812135MA
Rating
Price 1,392.00 με ΦΠΑ 24% 251.00 με ΦΠΑ 24% 1,832.00 με ΦΠΑ 24% 583.00 με ΦΠΑ 24% 438.00 με ΦΠΑ 24% 291.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.

Specification
Power Source 230 V AC, 50/60 Hz
Power Consumption 600 W (with rated output signal), 260 W (according to EN60065)
Rated Output 240 W
Frequency Response 50 Hz - 20 kHz, ±3 dB (at 1/3 rated output)
Distortion 0.7 % or less (at rated output, 1 kHz)
S/N Ratio 85 dB or more
Input External amplifier input: 100 V line, removable terminal block (14 pins)
Output Speaker output 1 - 2: Max. (240 W) per output
Speaker output 3 - 6: Max. (120 W) per output
Speaker output 1 - 6: Total within 240 W, removable terminal block (14 pins)
Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection
Direct output: Direct output from internal or external amplifier,
removable terminal block (16 pins)
VM Link Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connector
Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector
Maximum distance: 800 m (874.89 yd)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
EXT PA Link Connecting the VP-2241, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
General Control Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, removable terminal block (14 pins)
Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,
operating current: 10 mA or less, removable terminal block (14 pins)
Emergency Control Input 1 - 5: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,
RJ45 female connector
Status out: Relay contact output, withstand voltage: 40 V DC,
operating current: 2 - 300 mA, RJ45 female connector
ATT Control Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A,
removable terminal block (16 pins)
Power Input/Output Power in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC)
PS out: 28 V DC/18 A
M4 screw terminal, distance between barriers: 11 mm (0.43“)
DC24V Output 24 V DC, Maximum feeding current 0.3 A
Ds Link Connecting the VX-2000DS, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP)
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 5 % to 95 %RH (no condensation)
Finish Panel: Aluminum, hairline, black
Case: Surface-treated steel plate, black, paint
Dimensions 482 (W) × 132.6 (H) × 407 (D) mm (18.98" × 5.22" × 16.02“)
Weight 16.5 kg (36.38 lb)
Accessory Power cable (2 m (6.56 ft)) …1, Link cable (3 m (9.84 ft)) …2,
Plastic foot …4, Plastic foot mounting screw …4,
Removable terminal plug (14 pins) …3, Removable terminal plug (16 pins) …1

Ενισχυτής αυτοκινήτου 60W, με δυνατότητα τροφοδοσίας 12V από μπαταρία, 2mic input, 1AUX και μικρόφωνο με push talk διακοπτη.

Specification
Power Source Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used)
Power Consumption 9A or less at rated power output.
Output Power Rated 60W, max. 120W
Output Impedance 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections.
Distortion Less than 5% (at 1kHz rated output)
Frequency Response 100 ~ 10,000Hz
Input Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack
Dimensions (W x H x D): 178 x 50 x 170mm (mounting device excluded)
Weight 1.2 kg
Finish Front panel; ABS resin, Black
Case; Zinc plated steel sheet
Accessory Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (12A) ... 1
Connection cord ... 1 set
Accessory Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa)

 

Τελικός ενισχυτής 4Χ250W/4Ω, δυνατότητα bridge λειτουργίας (500W /8Ω), είσοδοι balanced με phoenix connectors, έξοδοι barrier strip, ύψος 1U, δυνατότητα για 4 διαφορετικές εισόδους. Με μετασχηματιστή γραμμής 100V για σταθερού voltage εγκαταστάσεις. 6,8Kg.

 

  • 4x 250W (4 ohms) / 170W (8 ohms)2x 500W bridged mode (8 ohms)
  • Limiter
  • Class D design – 85% efficient!
  • 30% lower power consumption than conventional amplifiers
  • Compact, single rack-space design
  • Stack up to 5 units without open spaces between units
  • Lightweight (14.6 lbs.)
  • Independent power supply for each channel
  • Low heat dissipation
  • Recessed stepped attenuators
  • Comprehensive protection circuitry
  • Removable dust filters for easy maintenance
  • Optional 250W isolation transformer, model MT-250H (DA-250FH only)

 

Ολοκληρωμένος ενισχυτής PA 240 WRMS, με μετασχηματιστή εξόδου 100V, με 3 mic& 2 AUX input, phantom power, high/low ρυθμιστικό EQ & priority mute στο mic 1, βάρος 13 kg. Εφαρμογές: σε εγκαταστάσεις 100V, μικρά καφέ, καταστήματα, εργοστάσια, κ.α.

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 240W
Power Consumption 238W (EN60065), 520W(AC operation at rated output, 15A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:42W (100V)
LOW IMPEDANCE: 4Ω (31V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 13kg

 

Ενισχυτής Public Address 120W/100V, 2 μεγαφωνικές ζώνες, 3 mic & 3 AUX inputs (2 stereo), emergency in με προτεραιότητα η οποία ενεργοποιείται ακόμα και αν το μηχάνημα είναι σε power off, telephone in με δυνατότητα προσπέλασης στις 2 ζώνες, τόνος (chime) αναγγελίας, rec out, line out. Δυνατότητα paging σε κάθε ζώνη ή και στις 2 ταυτόχρονα σε συνδυασμό με το paging μικρόφωνο PM-660. (420W x 100H x 364D mm). Βάρος 12,6kg

Specification
Power Source AC mains 50/60Hz, or 24V DC (M4 screw terminal)
Output 120W
Power Consumption AC operation: 158W (rated output), 66W (EN60065)
24V DC operation: 7.0A (rated output), 2.8A (EN60065)
Frequency Response 50 - 20,000Hz ±3dB
Distortion Under 2% at 1kHz, rated power
Input MIC 1: -60dB*, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack DIN socket (5 pins)
MIC 2, 3: -60dB(*1), 600Ω, electronically-balanced, combined type of XLR-3-31 Equivalent and phone jack
AUX 1(MOH): -20dB*, 10kΩ, unbalanced RCA pin jack
AUX 2: -20dB(*1), 10kΩ, unbalanced, RCA pin jack
AUX 3: -20dB(*1), 10kΩ, unbalanced, RCA pin jack combined type of XLR-3-31 and phone jack
TEL(*2): -20dB*1, 10kΩ, electronically-balanced, M3 screw terminal
Output REC: 0dB(*1), 600Ω, unbalanced, RCA pin jack
LINE 1,2(*3): 0dB(*1), 600Ω, unbalanced, RCA pin jack
MOH: 0dB(*1), 600Ω transformer balanced, M3 screw terminal
SPEAKER SELECTOR:
2 zone, high impedance (100V line/83Ω), individual selector switch, M4 screw terminal
DIRECT SPEAKER OUT:
High impedance (100V line/83Ω),M4 screw terminal
Low impedance (4 - 16Ω), M4 screw terminal(Both Low and High impedance terminals cannot be used at the same time.)
Phantom Power ON or OFF for each MIC 1 - 3 with switch setting
S/N ratio
(Band Pass: 20 - 20,000Hz)
Over 100dB (Master volume: min)
Over 76dB (Master volume: max)
Over 60dB (MIC 1 - 3))
Over 76dB (AUX 1 - 3)
Over 90dB (TEL)
Over 96dB (EMERGENCY)
Control Input Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
TEL: No-voltage make contact input, open voltage: 24V DC, short-circuit: under 5mA, M3 screw terminal
EMERGENCY (*4): No-voltage make contact input, open voltage: 24V DC, short-circuit: under 10mA, M3 screw terminal
Control Output Power remote: Open collector output, withstand voltage: 35V DC, control current: under 50mA, M3 screw terminal
Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED, TEL LED
Priority EMERGENCY: Overrides other inputs
TEL: Overrides other inputs except "EMERGENCY”, ON/OFF selectable with switch setting
MIC 1: Overrides other inputs except "EMERGENCY & TEL”, ON/OFF selectable with switch setting
Operating Temperature -10ºC - +40ºC
Finish Panel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions 420 (W) x 107.7 (H) x 367 (D)mm
Weight 12.6kg
Accessory Power cord x 1,
Terminal block cover x 1,
Terminal block cover mounting screw x 2
Option Rack mounting bracket: MB-25B,
Volume control cover: YA-920,
Input transformer: IT-453A
Note* (*1) 0dB = 1V
(*2) Can be transformer-balanced with the addition of optional IT-453A input transformer.
(*3) LINE 1 and LINE 2 outputs can be interlocked with ZONE 1 and ZONE 2 speaker selectors, respectively. (This function needs internal modification.)
(*4)Operation when activated can be selected from the following: Turning ON the unit\'s power (factory-preset) or OFF. (The OFF function needs internal modification.)

Ενισχυτής Commerciall Audio 35w/8Ω/70V/100V με προενισχυτή 3 εισόδων-1 ζώνη εξόδου, είσοδος μικροφώνου/line balanced με δυνατότητα priority-2x unbalanced RCA inputs-Βass/Treble+Master Level-Preamp Line out. Υποδοχη σύνδεσης τηλεφώνου. Για χρήση σε καταστήματα, νοσοκομεία, σχολεία, εκκλησίες, εργοστάσια κλπ. Dip switches για ρύθμιση λειτουργίας εισόδων. Διαστάσεις: ½ πλάτος rack-ύψος 2URack-Βάθος 35cm.

Weight16.50 kg1.20 kg6.80 kg13.00 kg12.60 kg4.80 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 16.50 kg
Βάρος 1.20 kg
Βάρος 6.80 kg
Βάρος 13.00 kg
Βάρος 12.60 kg
Βάρος 4.80 kg

Πρόσφατη Εμφάνιση Προϊόντων