| Content |
The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures.
| Power Source | 230 V AC, 50/60 Hz | | Power Consumption | 600 W (with rated output signal), 260 W (according to EN60065) | | Rated Output | 240 W | | Frequency Response | 50 Hz - 20 kHz, ±3 dB (at 1/3 rated output) | | Distortion | 0.7 % or less (at rated output, 1 kHz) | | S/N Ratio | 85 dB or more | | Input | External amplifier input: 100 V line, removable terminal block (14 pins) | | Output | Speaker output 1 - 2: Max. (240 W) per output
Speaker output 3 - 6: Max. (120 W) per output
Speaker output 1 - 6: Total within 240 W, removable terminal block (14 pins)
Allowable minimum load: 500 Ω (20 W) at 100 V line for speaker line failure detection
Direct output: Direct output from internal or external amplifier,
removable terminal block (16 pins) | | VM Link | Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connector
Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector
Maximum distance: 800 m (874.89 yd)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | EXT PA Link | Connecting the VP-2241, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | General Control | Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, removable terminal block (14 pins)
Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC,
operating current: 10 mA or less, removable terminal block (14 pins) | | Emergency Control | Input 1 - 5: No-Voltage make contact input, open voltage: 24 V DC,
short-circuit current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %,
RJ45 female connector
Status out: Relay contact output, withstand voltage: 40 V DC,
operating current: 2 - 300 mA, RJ45 female connector | | ATT Control | Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A,
removable terminal block (16 pins) | | Power Input/Output | Power in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC)
PS out: 28 V DC/18 A
M4 screw terminal, distance between barriers: 11 mm (0.43“) | | DC24V Output | 24 V DC, Maximum feeding current 0.3 A | | Ds Link | Connecting the VX-2000DS, RJ45 female connector
Maximum distance: 5 m (16.4 ft)
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | Operating Temperature | -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F) | | Operating Humidity | 5 % to 95 %RH (no condensation) | | Finish | Panel: Aluminum, hairline, black
Case: Surface-treated steel plate, black, paint | | Dimensions | 482 (W) × 132.6 (H) × 407 (D) mm (18.98" × 5.22" × 16.02“) | | Weight | 16.5 kg (36.38 lb) | | Accessory | Power cable (2 m (6.56 ft)) …1, Link cable (3 m (9.84 ft)) …2,
Plastic foot …4, Plastic foot mounting screw …4,
Removable terminal plug (14 pins) …3, Removable terminal plug (16 pins) …1 |
|
Crown CDi 2000 2x800W-4Ω Τελικός Ενισχυτής
Τελικός ενισχυτής με 2Χ1000W/2V, 2X800W/4Ω,2Χ800W/70V, δυνατότητα bridge λειτουργίας,εξελιγμένο τροφοδοτικό που επιτρέπει τη χρήση του ενισχυτή οπουδήποτε στον κόσμο LCD οθόνη ενδείξεων φωτιζόμενη στην εμπρόσθια πρόσοψη, με ενσωματωμένο επεξεργαστή DSP με έτοιμα preset για διάφορα ηχεία, EQ, limiting,compression, delay, crossover frequencies και subharmonic synthesizer. Είσοδοι balanced με phoenix connectors έξοδοι με barrier strip.Μεταβλητού βήματος ανεμιστήρες στο σύστημα ψύξης, με σύστημα προστασίας και ελέγχου 5 διαφορετικών σημείων, με 6 led ενδείξεων διαφόρων λειτουργιών Κατάλληλος για μόνιμες εγκαταστάσεις.
|
Μίκτης - ενισχυτής 6 μεγαφωνικών ζωνών ισχύος 360W ο οποίος μπροεί να τοποθετηθεί σε ικρίωμα (3U). Ικανοποιεί την ΕΝ60849 και την ΕΝ54. Επιτρέπει την εκπομπή μουσικής βάθους (BGM) αλλά και μηνυμάτων έκτακτης ανάγκης σύμφωνα με την ΕΝ60849. Οι ανακοινώσεις μπορούν να γίνουν τόσο από την κονσόλα RM-300MF όσο και από την ίδια την συσκευή. Διαθέτει βαθμίδα επιτήρησης η οποία ελέγχει το σύστημα αυτόματα για βλάβες.
| Specification |
|
|---|
| Power Source | AC mains, 50/60 Hz DC: 24 V DC | | Power Consumption | 850W | | Rated Output | 360W | | Frequency Response | 50 – 20,000 Hz, ±3dB (at 1/3 rated output) | | Distortion | Under 0.8% (at rated output, 1kHz) | | Signal-to-Noise Ratio | Over 85dB | Audio Input/Output
Characteristic | Sampling frequency: 48kHz
A/D D/A CONVERTER: 24bit | | Input | Input 1 – 3 : -50 dB (MIC)/-10dB (LINE) (changeable) 600Ω, electronically balanced combined XLR connector (female)/phone jack
Input 4: -50 dB (MIC)/-10 dB (LINE) (changeable) 600Ω, electronically balanced plug in screw connector
BGM 1 – 2 : -10 dB, 10kΩ RCA pin jack
External AMP Input: 100V Line plug in screw connector | | Output | Speaker output 1 – 2 : max (360w) per output
Speaker output 3 - 6 : max (120w) per output
Total with in 360W
Plug-in screw connector
Direct output : Direct output from internal or external amplifier
Plug-in screw connector
Recording output BGM / Paging : 0dB, 10kΩ, RCA pin jack | | RM Link 1.2 in | 2 RJ45 female connector for connecting the RM-300MF/RM-200M
Remote Microphone.
Maximum distance: RM1.2 Total 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | Network I/F | RJ45 female connector for switching hub or PC
10 BASE-T/100 BASE-TX Circuit (Selectable by automatic negotiation)
Maximum distance: 100m between this unit and a switching hub or PC
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | VM Link | RJ45 female connector for connecting the VM-3240E or VM-3360E
Maximum distance : 800 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | EXT PA Link | RJ45 female connector for connecting the VP-2241 or VP-2421
Maximum distance : 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | General Control In: 1 – 8/Out: 1 – 8 | Plug-in screw connector
Input : No-Voltage make contact input, open voltage: 24V DC, short-circuit current: under 1 mA
Output : Isolated open collector output, withstand voltage: 30V DC, operating current: under 50 mA | | Emergency Control In: 1 – 6/Status out | RJ45 female connector
Input 1 – 5 : No-Voltage make contact input, open voltage : 24V DC, short-circuit current: under 2 mA
Connection resistance to make the function: Inactive; 9.4kΩ ±5%/Active; 4.7kΩ ±5%
Input 6: Isolated voltage input: Inactive; -24V ±20%/Active; +24V ±20%
Status out: Relay contact output, withstand voltage: 40V DC, operating current: 2 – 300mA | | ATT Control | Plug In connector, relay contact, 30V DC, 125V AC 5A (AC/DC) | Power In/Out
PS Out/DC Power In | M4 Screw terminal distance between barriers 11 mm
This connector for connecting the VX-2000DS only
DC 28V/30A (operating range: 20 - 40V DC) | | DC24V Output | 24V DC ±10% Maximum feeding current 0.4A | | DS Link | RJ45 female connector for connecting the VX-2000DS
Maximum distance: 5 m
Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) | | Dimensions | 482 (W) x 132.6 (H) x 460 (D)mm | | Weight | 19kg | | Option | Input transformer: IT-450 |
|
Ενισχυτής Public Address 60W/100V, 2 μεγαφωνικές ζώνες, 3 mic & 3 AUX inputs (2 stereo), emergency in με προτεραιότητα η οποία ενεργοποιείται ακόμα και αν το μηχάνημα είναι σε power off, telephone in με δυνατότητα προσπέλασης στις 2 ζώνες, τόνος (chime) αναγγελίας, rec out, line out. Δυνατότητα paging σε κάθε ζώνη ή και στις 2 ταυτόχρονα σε συνδυασμό με το paging μικρόφωνο PM-660. (420W x 100H x 364D mm). Βάρος 9,4kg |
Ενισχυτής 5 μεγαφωνικών ζωνών, 240W [RMS] 100V 6 μικροφώνων, τροφοδοσία phantom, EQ 5 περιοχών 1 mic priority, τόνος chime, remote control power, δυνατότητα τοποθέτησης των module pam cd, pam tuner, βάρος 19 kg. Kατάλληλος για ναούς, ξενοδοχεία, καταστήματα κ.λ.π.
|
|
PAM-510
|
PAM-520
| |
Amplifier Section
(Amp In@1kHz,
4Ω Load Output)
|
Rated Output Power (THD 1%)
|
120W(RMS)
|
240W(RMS)
| |
Speaker Zone 1~5 Output
|
25W MAX
|
50W MAX
| |
Input Sensitivity/Impedance
|
1V/20kΩ
| |
S/N
|
Better than 85dB
| |
Frequency Response
(at 1kHz Half Power Output, ±3dB)
|
80Hz~18kHz
| |
Mic Input Section
(Mic 1~4 In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
–60dBV/600Ω
| |
S/N
|
Better than 55dB
| |
Frequency Response (±3dB)
|
120Hz~10kHz
| |
Tone Control
(Bass:100Hz,Treble:10kHz)
|
±12dB
| |
Phantom Power
|
+24VDC
| |
Line Input Section
(Line 1~2 In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
–30dBV/10kΩ
| |
S/N
|
Better than 65dB
| |
Frequency Response (±3dB)
|
80Hz~15kHz
| |
Tone Control
(Bass:100Hz,Treble:10kHz)
|
±12dB
| |
Remote Amp Section
(Remote In@1kHz,
Preamp Out)
|
Mic Input Sensitivity/Impedance
|
–60dBV/600Ω
| |
S/N
|
Better than 55dB
| |
Frequency Response (±3dB)
|
120Hz~10kHz
| |
Tel In Section
(Tel In@1kHz,
Preamp Out)
|
Input Sensitivity/Impedance
|
0.3V/600Ω(USA/Canada)
| |
0.775V/600Ω(EC & Associated)
| |
S/N
|
Better than 65dB
| |
Frequency Response (±3dB)
|
330Hz~3kHz
| |
Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)
|
0dBV/600Ω
| |
|
T.H.D
|
Less than 0.5%
| |
Record Out
|
–10dBV/3kΩ
| |
Operating Temperature
|
–10°C~40°C
| |
Power Source
|
100–120VAC or 220–240VAC; 50/60Hz, 24VDC
| |
Power Consumption (1/8 POWER)
|
180W
|
320W
| |
Weight
|
17kg/37.6lb
|
19kg/42lb
| |
Dimensions
|
482(W) x 132(H) x 398(D)mm
19(W) x 5.2(H) x 15.7(D)in
| |
※ Specifications and design subject to change without notice.
|
|
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 400: 2x 200 W / 100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 17 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.