| Content |
Ενισχυτής συστήματος ανακοινώσεων 2x120W/100V. Ο ενισχυτής ελέγχεται συνεχώς από το σύστημα και σε περίπτωση βλάβης αντικαθίστανται αυτόματα από εφεδρικό ενισχυτή, ο οποίος πρέπει οπωσδήποτε να είναι εγκατεστημένος σύμφωνα με το πρότυπο ΕΝ-60849.
| Specification |
|
|---|
| Power Source | 28V DC (operating range: 19 - 44V DC)
M4 screw terminal, distance between barriers: 12mm | | Current Consumption | (EN60065) 4.8A | | Rated Output Power | 240W | | Output Voltage/Impedance | 100V/41 Ω, 70V/21ohms, 50V/10ohms
selectable by the internal wiring change) | | Number of channels | 1 | | Input | Specified by input module VP-200VX | | Number of Module slots | 4, usable module: VP-200VX | | Output | Power amplifier output (speaker line): M3.5 screw terminal, distance between barriers: 8.8mm | | Frequency response | 40 - 16,000Hz, ±3dB (at 1/3 rated output) | | Distortion | Under 1% (at rated output, 1kHz) | | S/N Ratio | Over 80dB | | Panel Indicator | Channel power indicator: 1 channel, dual color LED
Overheat indicator: Yellow LED | | Operating temperature | 0ºC to +40ºC | | Finish | Panel: Surface-treated steel plate, black, 30% gloss, paint | | Dimensions | 482 (W) x 88.4 (H) x 340.5 (D)mm | | Weight | 8.1kg | | Accessory | Rack mounting screw x 4, Fiber washer x 4 |
|
Ενισχυτής αυτοκινήτου 60W, με δυνατότητα τροφοδοσίας 12V από μπαταρία, 2mic input, 1AUX και μικρόφωνο με push talk διακοπτη.
| Specification |
|
|---|
| Power Source | Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used) | | Power Consumption | 9A or less at rated power output. | | Output Power | Rated 60W, max. 120W | | Output Impedance | 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections. | | Distortion | Less than 5% (at 1kHz rated output) | | Frequency Response | 100 ~ 10,000Hz | | Input | Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack | | Dimensions | (W x H x D): 178 x 50 x 170mm (mounting device excluded) | | Weight | 1.2 kg | | Finish | Front panel; ABS resin, Black
Case; Zinc plated steel sheet | | Accessory | Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (12A) ... 1
Connection cord ... 1 set | | Accessory | Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa) |
|
Ολοκληρωμένος ενισχυτής PA 30 WRMS, με μετασχηματιστή εξόδου 100V, με 3 mic& 2 AUX input, phantom power, high/low ρυθμιστικό EQ & priority mute στο mic 1, βάρος 5 kg. Εφαρμογές: σε εγκαταστάσεις 100V, μικρά καφέ, καταστήματα, εργοστάσια, κ.α.
| Specification |
|
|---|
| Power Source | 220 - 240V AC or 24V DC | | Rated Output | 30W | | Power Consumption | 34W (EN60065), 78W(AC operation at rated output, 2A (DC operation at rated output) | | Frequency Response | 50 - 20,000Hz (+/- 3 dB) | | Distortion | Under 1% at 1kHz,1/3 rated power | | Input | MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) | | Output | SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:330W (100V)
LOW IMPEDANCE: 4Ω (11V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack | | Phnatom Powe | DC + 21V (MIC 1) | | S/N Ratio | Over 60dB | | Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz | | Muting | MIC1: Mutes other signals by 0 - 30 dB attenuation | | Indicator | Power signal, peak | | Finish | Panel: ABS resin, black/Case: Steel plate, black | | Dimensions | 420 (W) x 100.9 (H) x 280.2 (D) mm | | Weight | 5kg |
|
Ενισχυτής 6 μικροφώνων, 120W/100V, τροφοδοσία phantom, 5 ζώνες, EQ 5 περιοχών, 2 mic priority, δυνατότητα τοποθέτησης των modules pam-d (deck), pam-tuner, pam-cd, τόνος chime. Κατάλληλο για εκκλησίες και ξενοδοχεία.
|
|
| |
Rated Output Power
|
PAM-120A(THD 1%) : 120W (RMS)
PAM-340A(THD 3%) : 340W (RMS)
PAM-480A(THD 3%) : 480W (RMS)
| |
Frequency Response
| |
Amp In
|
80Hz~20kHz
| |
Link In
|
80Hz~15kHz
| |
CH1~CH6
|
120Hz~8kHz
| |
Remote In
|
120Hz~8kHz(PAM-340A, PAM-480A)
| |
T.H.D.(at 1kHz Rated Output)
|
Less than 1%(PAM-120A)
| |
T.H.D.(at 1kHz Half Power Output)
|
Less than 0.5%(PAM-340A, PAM-480A)
| |
S/N
| |
Amp In
|
Better than 90dB(PAM-120A)
Better than 88dB(PAM-340A/480A)
| |
Link In
|
Better than 65dB
| |
CH1~CH6
|
Better than 50dB
| |
Remote In
|
Better than 50dB(PAM-340A/480A)
| |
Input Sensitivity/Impedance
| |
CH1~CH6
| |
TRIM VR -60dB Position
|
1mV/10kΩ
| |
TRIM VR -16dB Position
|
158mV/10kΩ
| |
Link In
|
100mV/10kΩ
| |
Amp In
|
1V/47kΩ(PAM-120A)
1V/20kΩ(PAM-340A/480A)
| |
Remote In
|
1V/10KΩ(PAM-340A/480A)
| |
Speaker Output/Impedance
|
PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω
PAM-340A : 340W, 100V/29.4Ω
PAM-480A : 480W, 100V/20.8Ω
| |
Preamp Output/Impedance
|
1V/600Ω
| |
Tone Control (100Hz, 10kHz)
|
±12dB
| |
CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz)
|
±12dB
| |
|
| |
|
| |
Power Source
|
100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)
| |
|
(Supplied AC mains transformer depends on country requirements)
| |
Power Consumption
|
PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)
PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)
PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)
| |
Weight
|
PAM-120A : 13kg/28.7lb
PAM-340A : 13.5kg/29.7lb
PAM-480A : 15.5kg/34.2lb
| |
Dimensions
|
420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in
| |
Operation Temperature
|
14F~104F (-10°C~+40°C)
|
|
Τελικός ενισχυτής 4Χ250W/4Ω, δυνατότητα bridge λειτουργίας (500W /8Ω), είσοδοι balanced με phoenix connectors, έξοδοι barrier strip, ύψος 1U, δυνατότητα για 4 διαφορετικές εισόδους. Με μετασχηματιστή γραμμής 100V για σταθερού voltage εγκαταστάσεις. 6,8Kg.
- 4x 250W (4 ohms) / 170W (8 ohms)2x 500W bridged mode (8 ohms)
- Limiter
- Class D design – 85% efficient!
- 30% lower power consumption than conventional amplifiers
- Compact, single rack-space design
- Stack up to 5 units without open spaces between units
- Lightweight (14.6 lbs.)
- Independent power supply for each channel
- Low heat dissipation
- Recessed stepped attenuators
- Comprehensive protection circuitry
- Removable dust filters for easy maintenance
- Optional 250W isolation transformer, model MT-250H (DA-250FH only)
|
Crown CDi 1000 2x700W-4Ω Τελικός Ενισχυτής
Τελικός ενισχυτής 2 Χ 700W στα 4 Ω και 2 Χ 500W 70 V/ 100 V. Μέ οθόνη LCD στη πρόσοψη ειδικός ενισχυτής για 100 βολτικά συστήματα πολλαπλών και σύνθετων εγκαταστάσεων. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.