Content |
Δέκτης UHF με δυνατότητα τοποθέτησης σε rack, με 64 κανάλια,τεχνολογία True Diversity για αδιάλειπτη λήψη, 3πλό κύκλωμα squelch, δυνατότητα mix input για πολλαπλή συζευξη, 75Ω έξοδοι και είσοδοι κεραίας BNC Α+Β για χρήση με εξωτερική κεραία και διαμοιρασμό σήματος RF, οθόνη LCD, με ενδείξεις RF-AF-Antenna A/B ?ενδειξη μπαταρίας. Λειτουργία channel check για εύρεση «καθαρών» συχνοτήτων. S/N 110 dΒ. 5-pin service port. Έξοδος XLR mic out και ? Jack line out (unbalanced)
(*1) 0 dB = 1 V Power Source | AC mains (supplied AC adapter must be used) | Power Consumption | 250 mA (12 V DC) | Receiving Frequency | 636 - 865 MHz(*2), UHF | Channel Selectable | 64 selectable frequencies | Receiving System | Double super-heterodyne | Diversity System | Space diversity (true diversity) | Mixing Output | MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack | Mixing Input | -20 dB(*1), 10 kΩ, unbalanced, phone jack | Antenna Input | 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max) | Antenna Output | 75 Ω, BNC (Gain 0 dB) | Receiving Sensitivity | 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation) | Squelch Sensitivity | 18 - 40 dBμV variable | Squelch System | Using together of noise SQ, carrier SQ and tone SQ | Tone Frequency | 32.768 kHz | Indicator | Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm | Channel Check | Usable frequencies scanning | S/N Ratio | 110 dB or more (A-weight, unbalanced output) | Harmonic Distortion | 1 % or less (typical) | Frequency Response | 100 Hz - 15 kHz, ±3 dB | Operating Temperature | -10 ℃ to +50 ℃ | Finish | Resin, black | Dimensions | 210 (W) × 44 (H) × 205.1 (D) mm | Weight | 700 g | Accessory | AC adapter(*3) …1, Wireless antenna …2 | Option | Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units) |
|
The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.
(*1) 0 dB = 1 V Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | Power Consumption | 15 W or less | Receiving Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Receiver Sensitivity | S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation) | S/N Ratio | 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted) | Tone Squelch Frequency | 32.768 kHz | Infrared Receiver Input | 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals) | Output | Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output. | Frequency Response | 100 Hz - 12 kHz | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Case: ABS resin, black | Dimensions | 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“) | Weight | 630 g (1.39 lb) (unit only) | Accessory | AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4 | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together) |
|
Type of Receiver Dual independent receivers, automatic-switching diversity
RF Carrier Frequency Range Band C - 541.500 MHz to 566.375 MHz
Approx. Working Range 300 feet
Overall Frequency Response 70 Hz to 15 kHz
Signal-to-Noise Ratio 115 dB at 40 kHz deviation (IEC-weighted), maximum modulation 75 kHz
# Of Channels 200 Channels
Type of Output(s) Unbalanced: 1/4" TS (“mono“) phone jack
Balanced: XLRM-type
Headphone Monitoring 1/4" TRS Phone
Power Requirements 100-240V AC 50/60 Hz; 8W
Battery Type/Approx. Life AC Powered Only
Display Back-Lit LCD Display & Battery / Signal Status LED
Mounting Options Table Surface / Rack Mountable rack ears included
Antenna Type BNC Flexible UHF
Dimensions 8.31 x 1.74 x 9.26" (211.0 x 44.0 x 235.0mm) (WxHxD)
Weight 2.4 lbs (1.1 kg)
Mounting Options Table Surface / Rack Mountable rack ears included
Antenna Type BNC Flexible UHF
Dimensions 8.31 x 1.74 x 9.26" (211.0 x 44.0 x 235.0mm) (WxHxD)
Weight 2.4 lbs (1.1 kg)
Transmitter AEW-T3300 Handheld Transmitter
Type of Transmitter Frequency Agile Handheld
Type of Input Connector Not applicable
Type of Microphone Condenser
Polar Pattern Cardioid
Interchangeable Mic Heads No
Battery Type/Approx. Life (2) 1.5v AA Alkaline not included
Mute Switch Power / Mute switch dual function
Level Control No
Antenna Type Internal
Display Back-Lit LCD Display & Battery / Signal Status LED
Dimensions 9.41 x 1.97" (239 x 50mm)(Length x Diameter)
Weight 9.5 oz (270 grams) without batteries
|
THE PROFESSIONAL 19" SOLUTION!
The WS100R2 Double Receiver has the same features and technical parameters like the WS100R Receiver. The 19'' size and the possibility for front mounting antennas, saves the rackmount kit and rack space. Inclusive two TNC antenna cables.
|
Designed for on-camera mounting, the FP5 Portable Receiver locates an open frequency at the touch of a button and instantly syncs the transmitter to the receiver frequency.
The battery-powered FP5 is lightweight and durable, featuring diversity antennas and output to either XLR or 1/8" connectors.
For use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Power LED with low battery indicator
RF LED that indicates transmitter sync when illuminated
Receiver output level control that manages output to camera/mixer
Diversity antennas for consistent reception of signal transmission
TA3F cable output to either XLR or 1/8" connectors included
Camera shoe mount included
Rugged and lightweight Shure construction
Audio Output Type
TA3F
Configuration
Impedance balanced
Pin Assignments
1=ground, 2=hot, 3=cold
Maximum Audio Output Level (Ref. ±38 kHz deviation with 1 kHz tone)
–5 dBV (into 600 Ω load)
Impedance
200 Ω
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
81 g (3 oz.)
Housing
Molded polycarbonate case
Sensitivity
–108 dBm for 12 dB SINAD, typical
Power Requirements
LR6 AA batteries, 1.5 V
Battery Life
Up to 12 hours (alkaline)
Bandwidth
24 MHz
Compatible Systems
Up to 20, simultaneous
|
Δέκτης diversity τριών (3) συχνοτήτων UHF (710-865MHz). Διαμόρφωση FM, εύρος 40-20kHz. Έξοδος MIC ή LINE level με XLR ή unbalanced jack 1/4'. Κατάλληλος για όλους τους πομπούς της σειράς 40, δυνατότητα έως & εννέα (9) καναλιών σε πολυκαναλική ταυτόχρονη λειτουργία. |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.