Turbosound MILAN 12 – Ενεργό ηχείο 2 δρομων 12″ 1100W (ΜΑΥΡΟ)

Αυτοενισχυόμενο ηχείο δύο δρόμων σε πλαστική καμπίνα με woofer 12" και κόρνα τιτανίου 1,5“, ενισχυτής 1200W RMS class D με limiter (διασπορά 90 Χ 60), απόκριση συχνότητας 51-20000Hz, 130dB max SPL. Παρέχονται 2 είσοδοι με Line Balanced XLR combo/ jack και RCA stereo. Link out με Balanced XLR. Διαθέτει επεξεργαστή DSP (LCD Screen) με επιλεγόμενη ρύθμιση τοποθέτησης (monitor, tripod, wall, suspend). Επιλογή λειτουργίας 4 θέσεων (Music, Live, Speech, Club), ρύθμιση high pass (80Hz, 100Hz, 120Hz, 150Hz, ELX200-12SP, ELX200-18SP, ZXA1-SUB, EKX15SP, EKX18SP, ELX118P) και eq 3 περιοχών . Δυνατότητα αποθήκευσης 5 user ρυθμίσεων από τον χρήστη. Μπορεί να ελεγχθεί ασύρματα μέσω bluetooth με την εφαρμογή EV QuickSmart Mobile application. Bάρος 15,6kg σε μαύρο χρώμα. Διαθέτει φωλιά για βάση στήριξης και 3 σημεία στήριξης Μ10.

Aυτοενισχυόμενο ηχείο 2 δρόμων, πλαστικής καμπίνας, Bass reflex-type, Διαθέτει woofer 12'' και κόρνες 1,4'' και 2'', compression driver, crossover 2.1 kHz  απόκριση συχνότητας 48Hz 20 KHz, ισχύος 1000 Watt RMS, 131 dB maxSPL, σύνθετη αντίσταση 8 Ω και διασποράς 90 x 60, Είσοδοι / Έξοδοι : INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)  Διαστάσεις 37.6 x 60.1 x 34. cm. Βάρος 15.8 Kgr.

The tops of the LDBLOCKX Power Tower are fitted with 12" custom made midrange speakers and a 1" Celestion Driver, they are driven by a 450 W RMS Bi-Amp amplifier producing a maximum sound pressure level of 128 dB.

• Model Name: LDATOP12
• Type: Bassreflex
• Components:
  • Woofer: 12" Custom Made
  • Compression Driver: 1" Custom Made
  • Amplification: Class A / B (Bi-Amp)
• Dispersion: 60° x 40°
• Power (RMS): 350 W + 100 W
• Frequency Range: 80 Hz - 20 kHz
• SPL (1 W/ 1 m): 101 dB
• Max SPL: 128 dB
• Protection: Limiter, Thermal, DC, Short circuit, HF
• Controls: Main Volume, Tweeter Volume, switchable High Pass (80 / 120 Hz), On/Off Switch
• Indicators: Power, Limiter, Signal, Protect
• Connectors:
  • Input: Line: XLR + Jack 6,3mm (Combo)
  • Output: Line: XLR
• Power Supply: Transformer
• Cabinet Material: 15 mm Plywood
• Cabinet Surface: Painting
• Dimensions (W x H x D): 450 x 500 x 520 mm
• Features: Ergonomic milled handles

Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)

Product Features:

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

 User's Manual