VOX AC-50CPH ΕΝΙΣΧΥΤΗΣ ΚΙΘΑΡΑΣ 50W HEAD

Ενισχυτής κιθάρας HEAD Classic Plus 50 Watt, διαθέτει προενίσχυση με 4 λυχνίες 12AX7/ECC83 & έξοδο με 2 λυχνίες EL34B, 2 ανεξάρτητα κανάλια με reverb & FX-loop ελεγχόμενα από ποδοδιακόπτη, master volume, έξοδος balanced XLR και unbalanced 1/4" DI output.

Ενισχυτής κιθάρας JCM 900 HEAD 100W, με 3xECC83 Pre-Amp tubes και 4x5881 Power AMP tubes, 2 κανάλια, σειριακή FX λούπα.

Ενισχυτής κιθάρας JTM45 HEAD (reissue) 30W, με 3xECC83 Pre-Amp tubes και 2x5881 Power AMP tubes), σειριακή FX λούπα με διακόπτη Τrue Βypass.
 
Marshall 2245-01 30W Guitar Amplifier

When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.

By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.

Κεφαλή ενισχυτής κιθάρας 120W που οδηγείται από τέσσερις λυχνίες EL84, δύο καναλιών (Clean/Crunch, Lead) με 6 λυχνίες προενίσχυσης 12AX7 με ανεξάρτητο equalizer (Bass, Mid & Treble ) για κάθε κανάλι . Εφοδιασμένος με υψηλής ποιότητας reverb ανά κανάλι. Επιλογή αντίστασης μεγαφώνου καμπίνας (4,8,16 Ω).

Ultimate Rock Tone 120-Watt 2-Channel Tube Amplifier Head with Reverb and INFINIUM Tube Life Multiplier

• Hand-built 120-Watt amplifier driven by 4 x 6L6 tubes (convertible to EL34)
  
• 2-channel preamp design (Clean/Crunch, Lead) featuring 6 x 12AX7 tubes for thick and screaming hi-gain
• Revolutionary INFINIUM Tube Life Multiplier technology:
  • Extends the life of your amplifierʼs expensive power tubes up to 20 times
  • Provides incredible reliability and consistent tone over the complete lifespan of your tubes
  • No need for expensive matched tube sets
  • Allows you to mix and match any combination of compatible tube types and brands
  • Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement

• Integrated high-class reverb with dedicated Reverb control for each channel
  
• Independent Equalizer sections for each channel with dedicated Bass, Mid and Treble controls
  
• Classic Presence control per channel for efficient midrange sound shaping
  
• Heavy-duty footswitch for Channel selection and FX Loop function included
  
• Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  
• High-quality components and exceptionally rugged construction ensure long life

The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.

Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.

• Product type: Amplifier
• Type: 2-channel
• Output power (1 kHz 4 ohms): 2 x 200 W
• Output power (1 kHz 8 ohms): 2 x 100 W
• Output power (1 kHz 8 ohms, bridged mode): 400 W
• Circuit concept: Class D dynamic
• Frequency response: 20 - 20,000 Hz
• THD:
• Voltage gain: 32 dB / 26 dB / 28 dB
• Input sensitivity: 0.68 V / 1.4 V / 1.2 V
• Protection: Soft-start, short-circuit, DC, overheating, overvoltage
• Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
• Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
• Line input connectors: 2 x XLR, 2 x 6.3 mm jack
• Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
• Cooling System: low-noise fan
• Power supply: switching power supply
• Power Consumption Full Load: 470 W
• Operating voltage: 115 V AC / 230 V AC (switchable)
• Width: 482 mm
• Height: 44 mm
• Depth: 244 mm

Marshall 2203-01 100W Guitar Amplifier

The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.

The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.