Content |
Διανομέας ήχου 2 εισόδων και 4 εξόδων με δυνατότητα διπλής λειτουργίας. α) 1 είσοδος - 8 έξοδοι ή β) 2 είσοδοι - 4 x 2 έξοδοι. Δέχεται σήματα mono ή stereo και η στάθμη εξόδου μπορεί να ελέγχεται ανεξάρτητα σε κάθε έξοδο μέσω περιστροφικού ποτενσιόμετρου. Διαθέτει LED VU meters για την απεικόνιση της στάθμης του σήματος εισόδου και ανεξάρτητα ρυθμιστικά για κάθε κανάλι. Είσοδοι και έξοδοι σε XLR balanced.
Signal distributor. 1 stereo input / 4 stereo outputs or 1 mono input / 8 mono outputs
This audio distributor is very useful to supply several audio devices with only one audio source. Its 2 operating modes allow to work with mono or stereo signals. Output level can be controlled independently.
WD 421 adapts itself to work with different impedances, ensuring that output signal level is at least equal to input signal level. It avoids any undesired attenuation and features a LED vumeter to visualize the input signal level.
Audio signal distributor with 2 inputs and 8 outputs. Two operating modes: 1 stereo input with 4 stereo outputs. 1 mono input with 8 mono outputs. Adjusting Output level. Balanced LINK output for interconnecting several units. Individual gain control of each channel
Inputs: 2 x XLR3 female balanced. Outputs: 8 x XLR3 male balanced. Input sensitivity: 0 dBu. Max. level input: 22 dBu. Input impedance: 10 kohm. Level range: ? to - 12dBu. Frequency response: 20 Hz to 22 kHz. Distortion: 110 dBu. Noise and hum: < - 80 dB @ 20 Hz - 22 kHz. Crosstalk: < - 80 dB @ 20 Hz - 22 kHz. Output impedance: 120ohm. Main supply: 110 - 120 V / 220 - 240 V 50/60 Hz. Power consumption: 20 W. Dimensions (WxHxD): 483 x 44 x 220 mm. Weight: 2.75 kg.
|
DBX-166XL
Compressor - limited- gate /expander 2 εισόδων κύκλωμα overeasy,
peakstopplus, είσοδοι- έξοδοι XLR κατάλληλος για studio & live χρήση.
Overview Bring a more professional sound to your mix
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.
dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications Input Connectors | 1/4" TRS, female XLR (pin 2 hot) | Input Impedance | >50kΩ balanced, >25kΩ unbalanced | Max Input | >+24dBu, Balanced or Unbalanced | Input Type | Electronically balanced/unbalanced, RF filtered | Sidechain | 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) | Sidechain Impedance | Tip = >10kΩ (Input), Ring = 2kΩ (Output) | Sidechain Max Input Level | >+20dBu (tip/input); >+20dBu (ring/output) | Output Connectors | 1/4" TRS, female XLR (pin 2 hot) | Output Impedance | 120Ω balanced, >60Ω unbalanced | Max Output | +21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω) | Frequency Response | 20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain | Noise | |
|
Features: Two channel / four way split Channels linkable for 1 in, 8 out Ultra low noise design ?SilentSwitch? Phantom Power switch ?20 dB pad switch 0 to +40 dB Gain available via rear switches Electronically Balanced Inputs and Outputs (standard) Transformer Balanced Outputs option 12 VDC supply connector for remote or mobile applications Intuitive, 'user friendly' layout Flawless performance in any audio environment
Today?s venues face a growing need to provide a multiplicity of audio feeds from presentations, conferences, orchestral performances and lectures. The advent of digital broadcasting, the growth of webcasts and direct-to-CD archiving highlight the deficiencies in audio splitting systems more than ever before. Whether the final product is a broadcast feed or CD sales of an unrepeatable lecture, performance or event, end-users? expectations of audio quality are higher than ever.With these requirements in mind, ARX has developed the MSX 8 Active Microphone/Line Splitter to deliver the performance required by today?s standards of audio production. Active microphone and line splitting has a number of benefits over passive splitters: primarily these are improved sound quality, noise figures comparable to the best microphone inputs, and increased resistance to RFI. All of which translate into superb audio quality for your clients. About the MSX 8 The MSX 8 consists of two channels of actively buffered ultra low noise Microphone/ Line Splitter. Each of these channels has four electronically Balanced splits ? two on the rear panel, plus two more on the front panel. All four output splits have the option of transformer balancing if so specified.Each channel has a ?20 dB pad switch plus silently switchable 48V Phantom power with indicator LED.Gain through the MSX 8 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB stepsA ?Link? switch links Channel 1 to Channel 2, providing an ultimate maximum of 8 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted.For remote or mobile applications a 5 pin DIN connector on the rear panel provides an access point to connect a 12V DC power supply Inside Information Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout.Advanced user options include internally jumper linking Inputs to Main outputs, and Ground lifting Output Pins 1as required. Internal Power Supply The MSX 8 has a low noise transformer based power supply to obtain the maximum benefit from the ultra low noise design of the splitter circuitry. Summing up, the feature packed MSX 8 is the answer wherever transparent signal buffering and routing is required. T E C H N I C A L S P E C I F I C A T I O N S Signal / Noise Ratio -94dB Distortion .008% 20Hz - 20KHz Gain through unit Switchable 0, +10, +20, +30, +40 dB Maximum Output +24dB Pad Switch ?20dB attenuation Gain Switch +20dB gain Phantom Power +48VDC slow turn on/turn off Output Impedance 100 Ohms Electronically Balanced (Optional Transformer balancing available) Clip LED 1dB before clipping 12 Volt Connector 5 pin DIN AC Mains Input Fused IEC socket AC Power 100-120VAC 2 amp, 220-240VAC 1 amp Transformer Type Low noise toroidal Size 19?W x 1??H x 6?D, 482 x 44 x 125 mm Weight 5 lbs (2.2 Kg)
Front Panel A and B balanced XLR Output splits Channels 1 and 2. Pin 3?-, Pin 2 +, Pin 1 Ground 48V Phantom Power switch and LED Channel link switch and LED switch ?20dB pad switch Numbered marker panel for labelling individual channel assigns AC power LED Rear Panel Channel Gain DIP switches: 0, +10, +20, +30, +40dB Balanced XLR Input Channels 1 and 2. Pin 3 ?, Pin 2 +, Pin 1 Ground Balanced XLR Main (FOH) Output (same wiring as Input) Channels 1 and 2 Balanced XLR Monitor Output (same wiring as Input) Channels 1 and 2 12 Volt DC power supply input for remote or mobile applications IEC 3 pin AC connector and integral fuseholder. Replace fuse with correct value only: 100?120 V AC 2 amp, 220?240 V AC 1 amp | DBX 223XS
Ηλεκτρονικό crossover 2 δρόμων με επιλεγόμενη συχνότητα cross,
ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα,
L & R είσοδοι & balanced έξοδοι με XLR.
Overview
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs
Features
- XLR balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx® 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
Specifications
Input Connectors |
XLR (pin 2 hot) |
Input Type |
Electronically balanced/unbalanced, RF filtered |
Input Impedance |
Balanced >50k ohm, unbalanced >25k ohm |
Max Input |
>+22dBu balanced or unbalanced |
CMRR |
>40dB, typically >55dB at 1kHz |
Output Connectors |
XLR |
Output Type |
Impedance-balanaced/unbalanced, RF filtered |
Output Impedance |
Balanced 200 ohm, unbalanced 100 ohm |
Max Output |
>+21dBu balanced/unbalanced into 2k ohms or greater |
Bandwidth |
20Hz to 20kHz, +/-0.5dB |
Frequency Response |
< 3 Hz to > 90 kHz, +0/-3 dB |
Signal to Noise Ratio |
Ref: +4 dBu, 22 kHz measurement bandwidth |
Signal-to-Noise (Stereo Mode) |
>94dB (Low Output), >91dB (High Output) |
Signal-to-Noise (Mono Mode) |
>94dB (Low Output), >93dB (Mid Output), >91dB (High Output) |
Dynamic Range |
> 106 dB, unweighted, any output |
THD+Noise |
< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
Interchannel Crosstalk |
< -80 dB, 20 Hz to 20 kHz |
Crossover Frequencies (Stereo Mode) |
Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
Crossover Frequencies (Mono Mode) |
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
Crossover Filter Type |
Linkwitz-Riley, 24 dB/octave, state-variable |
Low cut Switch |
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
Phase Invert Switch |
Inverts the phase at the output, one switch per output. |
x1 / x10 Switch |
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
Mode Switch |
Selects stereo/mono and 2/3-way operation |
LF Sum Switch |
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
Indicators |
Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
Operating Voltage |
100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ |
Operating Temperature |
32°F to 113°F (0°C to 45°C) |
Power Consumption |
15W |
Power Connector |
IEC receptacle |
Dimensions |
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
Unit Weight |
3.7 lbs. (1.7 kg) |
Shipping Weight |
5.4 lbs. (2.5 kg) |
|
- Συνδέστε 2 τηλεοράσεις ή βιντεοπροβολείς και κάντε εναλλαγή μεταξύ 4 συνδεδεμένων συσκευών HDMI.
- Ο διακόπτης μήτρας HDMI σας επιτρέπει να παρακολουθείτε άλλες συσκευές HDMI σε 2 οθόνες ανεξάρτητα.
- Χρησιμοποιήστε τον ενσωματωμένο υποβιβαστή 1080p σε περίπτωση που 1 ή περισσότερες οθόνες δεν υποστηρίζουν ανάλυση 4K.
- Κατάλληλο για την πιο πρόσφατη ανάλυση Ultra HD 4K60 (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color και χρώματα chroma 4:4:4.
- Υποστηρίζει Dolby Atmos και DTS:X και όλες τις άλλες κοινές μορφές ήχου.
- Με πρόσθετη ψηφιακή έξοδο ήχου για να συνδέσετε επίσης τον δέκτη AV χρησιμοποιώντας ένα μόνο καλώδιο.
- Υποστηρίζει κανάλι επιστροφής ήχου (ARC) για την αποφυγή προβλημάτων συγχρονισμού χειλιών.
- Πραγματοποιεί εναλλαγές αυτόματα ή/και με το τηλεχειριστήριο.
Connections
|
|
AV input |
4 x HDMI |
AV output |
2 x HDMI |
Digital audio output |
1x Toslink (optical) |
Video
|
|
Video resolution |
Max. 4K60 (3840 x 2160@60 Hz) |
PC resolution |
Max. 2560 x 2048 Hz |
Video bandwidth |
18 Gbps |
Clock frequency |
Max. 600 MHz |
HDMI standard |
HDMI, EDID, DVI, Deep Color 36 bit, x.v. Colour and 3D formats |
HDCP standard |
HDCP 2.2 |
Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 or 4:2:2 |
Colour depth |
Max. 36 bit |
Audio
|
|
HDMI audio |
DTS-HD Master Audio, Dolby TrueHD, Dolby Atmos, DTS:X, Dolby Digital/AC3, DTS 5.1 and PCM stereo |
Optical Audio |
Dolby Digital/AC3, DTS 5.1 and PCM stereo |
General
|
|
Dimensions (h x w x d) |
18 x 242 x 104 mm |
Weight |
620grams |
Power |
100-240 VAC 50/60 Hz, 12 VDC adapter |
|
- Συνδέστε πηγές HDMI στον εξοπλισμό ήχου σας, ακόμη και αν δεν διαθέτουν ειδική έξοδο ήχου (Apple TV 4, Chromecast, Wii U, συσκευές αναπαραγωγής πολυμέσων).
- Ακούστε μουσική (MP3, ροές ήχου, ραδιοφωνικά κανάλια) χωρίς να απαιτείται η ενεργοποίηση της τηλεόρασης.
- Ευέλικτη λύση προβλημάτων κατά τη σύνδεση του ηχητικού σας εξοπλισμού με την τηλεόραση, την οθόνη ή τον προβολέα σας.
- Καθορίστε την επιθυμητή μορφή ήχου χρησιμοποιώντας τον μοναδικό διακόπτη EDID.
- Αναπαράγετε τον ήχο από τις εφαρμογές Smart TV (Netflix, YouTube) ή τον ενσωματωμένο αποκωδικοποιητή τηλεόρασης στο home cinema set, τον ενισχυτή ήχου ή το soundbar.
- Χρησιμοποιήστε τη λειτουργία ARC (Audio Return Channel) της τηλεόρασής σας, ακόμη και όταν ο εξοπλισμός ήχου σας δεν είναι κατάλληλος γι' αυτό.
Θέλετε ακόμα να συνδέσετε το Apple TV 4, το Google Chromecast ή την τηλεόρασή σας χωρίς έξοδο ήχου στον εξοπλισμό ήχου σας; Μπορείτε με το Connect AE14.
Αυτός ο αποσπαστής ήχου HDMI με ARC σας επιτρέπει να αποσπάσετε ήχο από την πηγή HDMI ή την τηλεόρασή σας και να τον προωθήσετε στα ηχεία μιας συσκευής οικιακού κινηματογράφου, ενός ενισχυτή ήχου ή ενός soundbar.
Τα προϊόντα της σειράς Connect μπορούν να χρησιμοποιηθούν εάν οι είσοδοι και οι έξοδοι του εξοπλισμού δεν μπορούν να συνδεθούν μεταξύ τους από προεπιλογή.
Connections
|
|
AV input |
1 x HDMI |
AV output |
1 x HDMI |
HDMI cable length |
15 metres (max.) |
Digital audio output |
1 x Toslink (optical), 1x coaxial |
Analogue audio output |
1 x stereo 3.5 mm jack |
Video
|
|
Supported resolution |
Max. 2160@30Hz |
HDMI standards |
HDMI 1.4, HDCP, CEC, ARC, EDID, DVI, Deep Color 36-bit, 3D formats and x.v. Colour |
Video bandwidth |
10.2 Gbps |
Clock frequency |
300 MHz |
HDCP standards |
HDCP 1.4/2.2 |
Colour formats |
RGB and YCbCr 4:4:4, 4:2:0 of 4:2:2 |
Colour depth |
Max. 36-bit |
Audio
|
|
Digital audio output |
DTS 5.1, Dolby Digital/AC3 and PCM 2.0 CH |
Analogue audio output |
2.0 CH |
General
|
|
Dimensions (h x w x d) |
20 x 70 x 68 mm |
Weight |
130 grams |
Ambient temperature |
+0 to +70 °C |
Humidity |
10% to 85% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.