| Content |
Παθητικό πλαστικό ηχείο 2 δρόμων Bass reflex, απόκριση συχνότητας 50Hz-20KHz, διασπορά 90x60, woofer 1x10'', 1 x 2'' Voice coil, κόρνα 1 x 1'', ισχύς 350W/Program, 700W/peak, sens 94dB @1W/1m, max SPL 123dB, αντίσταση 8Ω, υποδοχές Jack/Speakon, δυνατότητα rigging 2x Bottom M8, διαστάσεις 30,8x49.3x28.9 εκ, Βάρος 9,4 kg. |
Tύπος Καμπίνας Ξύλινη
Τύπος Κατασκευής 2 δρόμων Bass Reflex
Χρήση Monitor Ναι
Iσχύς Nominal (RMS) 300 W/RMS
Iσχύς Program 600 W/RMS
Iσχύς Peak 900 W/RMS
Αντίσταση 8Ω
Ευαισθησία 96 dB/1W@1m
Max SPL 127 dB
LF/MF, Woofer 10'' (woofer)
HF, Horn 1'' Driver
Διασπορά 90x70 (Rotatable)
Απόκριση Συχνοτήτων 70 - 20.000 Hz
Pole mount (φωλιά) Ναι
Rigging (ανάρτηση) 12 x M8
Υποδοχή σύνδεσης 2 x Speakon
Διαστάσεις 320 x 508 x 320 mm
Βάρος 14.2 Kg
Χρώμα Μαύρο
|
PS-10 από την JB-SYSTEMS, επαγγελματικό παθητικό ηχείο στιβαρής κατασκευής ισχύος 160Wms (320W max) με woofer 10”, με 1,35” compression driver, υποδοχές στήριξης τύπου M8, διπλή σύνδεση με βύσματα Speakon. Impedance 8 ohm, ευαισθησία 94dB 1W/1m.
Γενικά:
- Professional heavy duty Polypropylene cabinet housing
- Perfectly tuned sound
- Perfect for permanent installations
- Perfect for Portable use (Rental, DJ, ...)
- High power 10" Woofer
- High power 1.35" Compression Driver
- Blue „signal present" LED (with OFF-switch)
- Built-in M8 Rigging points
- Built-in 35mm stand adapter
- Dual Speakon® connectors
- Monitor support stands included
- Built-in heavy duty carrying handle
- Heavy duty rubber feet
Τεχνικά χαρακτηριστικά:
- Power Capacity: 160Wrms (320W max)
- Input impedance: 8 ohm
- Tweeter protection: PTC
- Input Sensitivity: 94dB 1W/1m
- Frequency response: 60 - 20.000Hz
- Nominal dispersion: 90° x 60° (HxV)
- Dimension (HxWxD): 355 x 270 x 500 mm
- Weight: 10,3kg
|
M1001 is a multipurpose two-way full-range speaker system, suitable in a wide range of installations.
The compactness, together with the elegant and neutral design with accurate finishing make M1001 suitable for almost any environment and architectural constraint.
Available mounting accessories allow you to use the M1001 wall or ceiling mounted, with reference to the several possible applications.
The M1001 has a controlled dispersion and delivers undistorted SPL value above any expectation from such a compact speaker system.
The M1001 features high sensitivity thanks to the use of oversized magnets and a comfortable sound quality with smooth and wide frequency response performed thanks to the Kapton diaphragm compression driver loaded on a constant directivity horn.
The LICC crossover design includes an electronic protection on high frequency device.
Γενικά Χαρακτηριστικά
High Quality 2-way passive loudspeaker
1 x 10" woofer, vented
1 x 1" driver, on 90°x60° CD horn
High Power Handling ‘Low Impedance Compensated Crossover\', with electronic protection for the driver
300W AES power handling
Steel Front Grille with robust double mesh polyester clothing
Rotatable RCF front logo
Installation points are available on the rear panel, top and bottom
All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
Ακουστικά Χαρακτηριστικά
Frequency Response -10 dB:60 Hz ÷ 20000 Hz
Max SPL @ 1m:128 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Directivity index; Q:10
System Sensitivity:97 dB
Nominal Impedance:8 Ω
Power Handling:300 W
Peak Power Handling:1200 W
Recommended Amplifier:600 W
Protections:Dynamic
Crossover frequencies:1700 Hz
Είσοδος/Έξοδος
Input connector:4-pin EUROBLOCK
Height:500 / 19.68 mm/inch
Width:265/ 10.43 mm/inch
Depth:320 / 12.60 mm/inch
Net Weight:13.2 / 29.08 kg/lbs |
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for small and medium size distributed systems.
The high frequency section is a constant directivity horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting.
The system features a selectable line transformer for 70 - 100 Volt applications/installations, it meets the requirements of IP 55 code (International Protection Rating)
| Features |
|---|
| Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | | Stainless steel bracket | | One 10" high-output LF transducer with 2" voice coil | | One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil | | 90° x 40° constant directivity horn | | Built in passive crossover and selectable line transformer | | 10° X 20° enclosure sides for array configurations | | Active Mosfet Compression Driver Protection | | LICC (Low Impedance Compensated Crossover) network | |
12 brass suspension points (M8)
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 95 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 118 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 11 | | | System Sensitivity: | 95 dB | | | Nominal Impedance: | 16 Ω | | | Power Handling: | 200 Watt | | | Peak Power Handling: | 800 Watt | | | Recommended Amplifier: | 400 | | | Protections: | Dinamyc | | | Crossover frequencies: | 2000 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 1.5" HF driver, 1" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 25 Watt AES | | | Sensitivity: | 106 dB | | | Woofer: | 10" woofer, 2.5" voice coil | | | Nominal Impedence: | 16 Ω | | | Input Power Rating: | 180 Watts AES | | | Sensitivity: | 95 dB | |
| INPUT SECTION |
|---|
| Input connector: | 5m, 4-adriges Neopren Kabel | | | Constant voltage transformer: | 70/100 | | | Power Selection: | 70V/30W ,15W , 100V/60W, 30W | |
| CABINET |
|---|
| Cabinet Material: | Polyethylene rotomoulded | | | Hardware: | 12 x M8 inserts+ U-brackets and pair of spacers | | | Grille: | Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing | | | Colour: | Grey | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 350 / 13.78 mm/inch | | | Width: | 350 / 13.78 mm/inch | | | Depth: | 320 / 12.60 mm/inch | | | Net Weight: | 13.5 / 29.75 Kg/Lbs |
|
| This highly professional 2-way loudspeaker is designed for absolute, long-term reliability. With its multifunctional bass reflex cabinet as a full range speaker, satellite and ground monitor, it is suited to mobile and fixed PA systems. The Stinger® 10 G3 provides 300 watts of continuous power; the maximum sound pressure level is 120 dB. Its specially developed 10" woofer and the BMS HF driver achieve a powerful bass reproduction and fresh natural highs. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves a controlled and homogeneous dispersion. The Stinger® 10 G3 is designed as a real all-round workhorse. The cabinet is made from robust birch plywood and offers exceptional stability and durability thanks to its extremely durable polyurea coating. The features include a steel grille, a Dual-Tilt stand attachment, flight points and ergonomic handles. The Stinger® 10 G3 is an affordable solution for professional PA applications; extensive accessories support the use on stage and in fixed installations.
Product type
PA loudspeaker
Low/mid driver dimensions
10 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50
Frequency response
65 - 20000 Hz
Protection circuits
HF Driver
Speaker input connections
Speakon compatible
Speaker output connections
Speakon compatible
Speakers per amplifier channel (DSP44/45K)
4
Cabinet material
12 mm Plywood
Cabinet construction
Bass Reflex
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.