Content |
Παθητικό πλαστικό ηχείο 2 δρόμων Bass reflex, απόκριση συχνότητας 50Hz-20KHz, διασπορά 90x60, woofer 1x10'', 1 x 2'' Voice coil, κόρνα 1 x 1'', ισχύς 350W/Program, 700W/peak, sens 94dB @1W/1m, max SPL 123dB, αντίσταση 8Ω, υποδοχές Jack/Speakon, δυνατότητα rigging 2x Bottom M8, διαστάσεις 30,8x49.3x28.9 εκ, Βάρος 9,4 kg. |
2-Way, 10“ High Power System |
Characteristics |
|
Multi-angled unit, designed for Sound reinforcement or floor monitoring. |
|
Multi-use Mid-High Constant Directivity, rotateable 90x45 degrees Horn. |
|
Active driver "Power Guard" protection without any effective loss. |
|
High Sound Pressure Level, (128dB Peak@1m, pink noise with a 6dB crest-factor). |
|
Rotating Horn and optimised cabinet architecture for monitoring and small P.A. uses. |
|
Two-way passive 8 Ohm design to be used with a single power Amp channel per cabinet to obtain an easy assembly and low cost. |
|
Passive filter, which optimises the voice critical zone response. |
|
Double input NL-4 Neutrik connector permitting parallel bridging. |
|
Steel front grille with acoustic foam, easily removable, held in place with powerful Neodymium magnets. |
|
Suspension Tracks on top bottom, standard pole cup and inserted threads. |
|
The specific electronic controller guarantees: linear performance, Powerful bass response, and reliability.
|
Applications |
|
Touring, installed P.A., theatres, multi-purpose rooms, etc. |
|
High performance Monitoring |
|
When used together with the series' Sub-woofer PMS-15, the system becomes a performing set-up for many dance applications.
|
Specifications and Characteristics |
Frequency Response (Hz)1 |
±3dB 60Hz - 18KHz |
Frequency Range (Hz)1 |
-103dB 40Hz - 20KHz |
Nominal Impedance |
8 Ohm |
Power Rating |
|
(RMS)2 |
300W |
Program2 |
600W |
Peak2 |
1200W |
Horizontal Coverage |
(-6dB) 90? |
Vertical Coverage |
(-6dB) 40? |
Sensitivity (dB/1w@1m) |
97dB SPL |
SPL Max. Peak (dB SPL@1m)3 |
128dB SPL |
Connectors |
2 Neutrik NL-4 Connectors on steel plate |
Recommended Signal Processor |
RAM Audio LMS-244 Digital Processor
|
Recommended Power Amp |
250W / 500W @ 8 Ohm, 1 PM-10 / channel
|
Recommended Sub-woofer |
Space PMS-15 |
Enclosure and Installation |
Enclosure |
Vertical, multi-angle 15mm Baltic cross-ply construction, tongue and groove assembly throughout. Bi-component epoxy finish. |
Protection Grille |
1.5mm laminated steel with textured epoxy finish. |
Handle |
On top of the cabinet. |
Dimensions (H,W,D) mm |
521 x 324 x 294 mm 20.5x12.7x11.6 inches |
Net Weight |
18Kg (39.6 pounds) |
Rigging |
Integrated Track Rigging System on top and bottom. M-6 Inserts for bolt assembly. |
|
Notes |
|
1 Specifications in half space 2 With filtered Pink Noise 6dB crest-factor 3 Calculated from the Sensitivity and Power Data | | MASTER AUDIO SB250 ΠΑΘΗΤΙΚΟ ΗΧΕΙΟ 2 ΔΡΟΜΩΝ 10" 200Wrms Νέος Σχεδιασμός
- Ισχύς 200 W RMS
- Impedance(Ohm) 8
- ABS box
- Woofer 250 mm, paper cone
- Compression driver, 34 mm titanium diaphragm
- Απόκριση συχνότητας 50 - 17KHz (-10dB)
- Ευαισθησία 103 dB
- Speakon input & output
- Διαστάσεις: 450 x 295 x 240 mm
|
XΗχείο 10" με επένδυση από μοκέτα, χειρολαβές και ανθεκτική μεταλλική σίτα. Ειδικά σχεδιασμένο για βαρύ μπάσο όπως σε ήχους hip-hop, techno και house.
Χαρακτηριστικά:
Σκληρής ανάρτησης χαμηλών συχνοτήτων (woofer)
Κόρνα μεγάλου εύρους με θερμική προστασία υπερφόρτωσης
Υψηλής ποιότητας crossover
Ιδιαίτερη απόδοση χαμηλών συχνοτήτων, κατάλληλο για είδη μουσικής όπως hip-hop, techno και house.
Εξαιρετικής αντοχής κάλυμμα μοκέτας
Μεταλλικές γωνίες προστασίας
Μεταλλικές χειρολαβές
Μεταλλική υποδοχή για στήριξη με τρίποδο
Μεταλλική σίτα
Τεχνικά χαρακτηριστικά:
Ισχύς 100 watt RMS
Maximum απόδοση: 200 watt
Τύπος: ηχείο 2-δρόμων
Απόκριση συχνότητας: 45 Hz - 20 kHz
Ευαισθησία: 97 dB
Woofer 25 cm, κόρνα
Αντίσταση: 8 Ohm
Διαστάσεις: 340 x 375 x 530 mm
Βάρος: 11 kg
|
Παθητικό ξύλινο ηχείο 2way, ιδανικό για stage monitor χρήση ή και τοποθέτηση σε βάση. Διαθέτει woofer 1x10'', 1x1in (compression driver), διασποράς 90x40, 65Hz-20KHz, ισχύς 150W RMS / 300W Program @8ohms, ευαισθησία 96dB, max SPL 96dB.
Tύπος Καμπίνας Ξύλινη
Λειτουργία 2 δρόμων πολλαπλών χρήσεων
Χρήση Monitor Ναι
Ενισχυτής 150 Watts (RMS); 300 Watts (Program)
LF/MF, Woofer 10''
HF, Horn 1 ''
DSP Processor - Max SPL 96 dB
Διασπορά 90x40
Απόκριση συχνοτήτων 65 Hz ~ 20 KHz
Pole mount (φωλιά) -
Rigging (ανάρτηση) -
Υποδοχή σύνδεσης 2x1/4 jack
Διαστάσεις 351x 491 x 314 (Π x Υ x Β)
Βάρος 11 Kg
Χρώμα Μαύρο
|
User\'s manual Technical drawing
- Passive 2-way bass-reflex installation speaker
- 200 W permanent load capacity
- 118 dB maximum sound-level pressure
- 10" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
white
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.