TOA PC-646R Ceiling Speaker 9W

Discontinued

19.12 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Ceiling speaker, 6W with 100V & 70V transformer

 

Read more

Ceiling speaker, 6W with 100V & 70V transformer

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “TOA PC-646R Ceiling Speaker 9W”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA PC-646R Ceiling Speaker 9W removeINTER-M CS-03A CEILING SPEAKER 3W removeTOA F-1522SC Ceiling Speaker 6W removeJBL CONTROL 226C/T-PL Ceiling Speaker, Coaxial 150W removeJBL CONTROL 24CT Ceiling 2 way speaker with transformer removeTOA F-2322C Ceiling Speaker 30W remove
NameTOA PC-646R Ceiling Speaker 9W removeINTER-M CS-03A CEILING SPEAKER 3W removeTOA F-1522SC Ceiling Speaker 6W removeJBL CONTROL 226C/T-PL Ceiling Speaker, Coaxial 150W removeJBL CONTROL 24CT Ceiling 2 way speaker with transformer removeTOA F-2322C Ceiling Speaker 30W remove
Image
SKUPC-646RCS-03AF-1522SCCONTROL 226C/T-PLCONTROL 24CTF-2322C
Rating
Price 19.12 incl. GR VAT 9.80 incl. GR VAT 64.45 incl. GR VAT 424.00 incl. GR VAT 178.99 incl. GR VAT 150.99 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Ceiling speaker, 6W with 100V & 70V transformer

- EASY INSTALLATION

You can install easily by using provided spring and steel cover.

- EFFICIENCY FOR P.A

Input transformer is incorporated for high efficiency of p.a use.


Unit

CS-03A

Rated Power

W

3

Impedance

Ω

COM, 3.3k, 5, 10k

Frequency Response

Hz

150 ~ 15k

SPL (1W/m)

dB

90

Weight

g

725

lb

1.6

Dimensions

(W x H x D)

mm

227(Ø)x100

inches

8.9(Ø)x4

※ Specifications and design subject to change without notice.

  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications
Enclosure n/a
Rated Input 6W (high impedance)
Power Handling Capacity Continuous pink noise: 9W(8), 6W (16)
Continuous program: 18W (8), 12W(16)
Impedance (100V Line) 1.7kΩ (6W), 3.3kΩ (3W)
Impedance (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W)
Impedance (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 88dB (1W, 1m)
Frequency Response 65 - 18,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: 10cm cone- type
Speaker Component Low frequency: 10cm cone- type
Mounting Hole ø135mm(maximum ceiling thickness: 37mm)
Input Terminal Push-in connector (Bridging terminal-2 branch type)
Usable Cable 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17)
Finish Enclosure n/a
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag Artificial fiber, black
Dimensions ø155 x 117 (D)mm
Weight 1kg (including panel)
Accessories Panel 1
Ceiling reinforcement ring n/a
Safety wire n/a
Paper pattern 1
Option Anchor hanging bracket n/a
Back can HY- BC1
Tile bar bridge n/a
Trim ring n/a

The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 226C/T incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 226C/T features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for outstanding reliability and performance. The system is complete with a pre-attached back can and is designed for years of maintenance free use.

Easy to install, the Control 226C/T features JBL Professionalʼs proven C-Ring with Tile Rail suspension system. Installation can be accomplished from beneath the ceiling structure for instances when access above the ceiling tile is not possible. Additionally, the removable multi-pin locking connector, with secure screw-down terminals, allows for prewiring the input wires for easy clip-on convenience during installation.

A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 226C/T enabling the system to be used on 70V or 100V distributed speaker lines. The system can be used in either 8 ohm (low impedance) or transformer mode by selecting the desired function via the baffle mounted impedance switch.

The clean, contemporary look of the Control 226C/Tʼs grille is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

Features

  • Consistent 120° broadband pattern control forexceptional coverage
  • Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
  • Extraordinary clarity for speech and vocals withextended frequency response for music
  • 150 Watts Power Handling
  • Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
  • Integrated back can with clean, contemporary grille

Specifications

  • Frequency Response (-10dB): 47Hz to 19kHz
  • Sensitivity: 90 dB; 95 dB computed for competitivecomparison
  • Coverage Angle: 120 degrees conical, broadband
  • Impedance: 8 ohms (in bypass model)
  • Tap Settings: A) Common; B) 7.5W @ 70V, 15W @ 100V;C) 15 W @ 70V, 30 W @ 100V; D) 30 W @ 70V, 60 W @ 100V; E) 60 W @ 70V, n/c @100V
  • Low Frequency: 6.5" woofer Kevlar reinforced cone
  • High Frequency: 1" exit compression driver
  • Dimensions (H x Dia): 13" round baffle x depth fromback of baffle of 9.7“

Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24CT Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.

The Control 24CT Micro includes a multitap transformer for 70V or 100V systems.

Features

  • Extremely wide 150° coverage.
  • Smooth frequency response.
  • Components:
    • 4½ inch (115 mm) woofer, injection molded graphite cone with butyl rubber surround.
    • ½ inch (12 mm) polycarbonate tweeter for extended response.
  • Control 24CT Micro includes 8W multitap transformer for 70V/100V systems.
  • Shallow 4-inch (100 mm) depth.
  • Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking.

Specs

  • 85 Hz to 20 kHz frequency range
  • 30 watts continuous program power (15W pink noise) capacity
  • 86 dB sensitivity (1W/1m)
  • Shallow steel back-can (only 4 in deep)
  • Control 24CT 70V/100V taps: 8W, 4W, 2W, 1W (and 0.5W for 70V only)
  • Dimensions (Height x Diameter): (4.2 x 7.7 in) 106 x 195 mm
  • 105 mm (4.1 in) front of ceiling tile to back of the backcan
  • Weight: 1.6 kg
  • Cutout Size: 167 mm (6.6 in)
  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications
Enclosure Bass reflex type
Rated Input 30W (high impedance)
Power Handling Capacity Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program: 120W(8Ω), 60W(16Ω)
Impedance (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W)
Impedance (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W)
Impedance (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 90dB (1W, 1m)
Frequency Response 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: 12cm cone-type
Speaker Component Low frequency: 12cm cone-type
Mounting Hole ø200(maximum ceiling thickness: 37mm)
Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
Finish Enclosure: Steel plate, plating
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag n/a
Dimensions ø230 x 200 (D)mm
Weight 3.7kg (including mounting accessories)
Accessories Panel 1
Ceiling reinforcement ring 1
Safety wire 1
Paper pattern 1
Option Anchor hanging bracket HY- AH1
Back can HY- BC1
Tile bar bridge HY- TB1
Trim ring HY- TR1
Weight1.00 kg1.60 kg1.00 kg7.00 kg3.50 kg3.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 1.60 kg
Weight 1.00 kg
Weight 7.00 kg
Weight 3.50 kg
Weight 3.70 kg

Recently Viewed Products