Content | * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
Recommended Usage In-Ceiling Front / Surround Speakers
Type 2-way coaxial
Woofers 8” PP (polypropylene) mica cone
Tweeters 1” fluid-cooled soft dome
Swivel Tweeter and Midrange Driver (Tweeters)
Paintable Grill with Protective Cover Included Yes
Frequency Response 50 Hz – 28 kHz
Sensitivity 90 dB (2.83 V, 1 m)
Input Power (Maximum / Nominal) 140W / 50W
Impedance 8 Ohms
Product Dimensions (W x H x D) 11-1/8" x 4-3/4“
Mounting Depth 4-1/4”
Product Weight (lbs. each) 4.2
| Recommended Usage In-Ceiling Front / Surround Speakers
Type 2-way coaxial
Woofers 6 1/2” PP (polypropylene) mica cone
Tweeters 1” fluid-cooled soft dome
Swivel Tweeter and Midrange Driver (Tweeters)
Paintable Grill with Protective Cover Included Yes
Frequency Response 65 Hz – 28 kHz
Sensitivity 90 dB (2.83 V, 1 m)
Input Power (Maximum / Nominal) 110W / 40W
Impedance 8 Ohms
Product Dimensions (W x H x D) 9-1/2“x 4-5/8“
Mounting Depth 4-1/4”
Product Weight (lbs. each) 3.3 |
Driver Complement
Mid/Woofer 1 - 8" Diameter (20.32cm)
Dynamic Balance polymer composite cone driver
Tweeter 1 - 1" Diameter (2.54cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response 35Hz-20kHz
Lower -3dB Limit 50Hz
Upper -3dB Limit 20Khz
Nominal Impedance 8 ohms
Recommended Amplifier Power 20-100 w/channel
Efficiency 90 dB
Dimensions
Overall Diameter 10-5/8“(26.99cm)
Cut-out Diameter 9-3/8“(23.81cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 3-7/8" (9.84cm)
Overall Depth 4-3/8" (11.11cm)
Shipping/Other
Product Weight 3.5000 lbs. (1.59kgs) each
Total Shipping Weight 5.0000 lbs. (2.27kgs)
Speaker Warranty Lifetime Warranty
|
Built on the same platform as the Control 47C/T, the Control 47LP is a low-profile model intended for locations with limited above-ceiling clearance (only 5.6 inches deep). The system features the same great sonic character and wide 120° of coverage as the Control 47C/T and is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Features:
Shallow Backcan Version of 47C/T for locations with limited clearance
Same Sonic Signature as Control 47C/T Allows
Mixing & Matching of mode
Proprietary Conical RBI® Technology Provides
Wide, Consistent Coverage
Flat Frequency Response and Superior Performance
Elegant design fits any décor
Specifications:
Frequency Range: 68 Hz - 20 kHz
Power Capacity: 150W program, 75W pink noise
Sensitivity: 91 dB, 1W, 1m
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Coverage:120° conical, consistent broadband
Nominal Impedance: 8 ohms
Component: 6.5 inch (135 mm) woofer, 1" tweeter
Termination: Screw-down removable locking clip-in connector
Included Accessories: C-rings, tile rails, paint shield,
cutout template Grille
Dimensions (Diameter x Depth): 305mm Diameter x 142mm Diameter Depth (12.0 in x 5.6 in)
|
Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.
Specifications:
- 85 Hz to 20 kHz frequency range
- 30 watts continuous program power (15W pink noise)capacity
- 86 dB sensitivity (1W/1m)
- Shallow steel back-can (only 4 in deep)
|
Reviews
There are no reviews yet.