Content |
PRICE PER UNIT
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
Main Monitors: S6X & S7A Mk2
The main monitors S6X and S7A Mk2 are designed for large control rooms and film studios. They present a completely new, impressive
concept: to transport the unique realism of the ADAM monitors at a very high SPL level. In accordance with ADAMʼs main goal to achieve the best possible authenticity in music reproduction, any overemphasis of the bass frequencies should be avoided. Furthermore, it is essential for neutral sound characteristics at high volumes to achieve a wide dispersion in the horizontal plane and a somewhat narrower dispersion in the vertical plane, thus reducing reflections from the ceiling, the floor or a mixing console. Less reflection means superior imaging and better localization, facilitating the best possible transportability of mixes across the widest range of playback systems.
Advanced DʽAppolito-array
The arrangement of the seven discrete drivers facilitates a gradual transition of the chassis dimensions. One of the most important aspects of these monitorʼs new approach is the horizontal symmetry of the drivers, which could be referred to as advanced D´Appolito array. If the drivers are filtered properly there are – besides the dispersion characteristics mentioned previously – two more advantageous results:
- There is an absence of any sudden change in directivity with frequency, leading to harmonic dispersion behavior throughout the audio band. The absence of sudden changes in directivity is not visible in a frequency plot, but clearly audible - especially with a full range of materials, from single complex sources such as the human voice to the wide sonic palette of large orchestras.
- The dynamic capabilities of the monitor are distributed over the audio band more equally, and louder recording or mixdown sessions with SPL´s of 120dB are handled without offending the ear.
Impulse Coupling
In order to get a precise and undistorted reproduction, all drive units are mounted on an ultra stiff Aluminum honeycomb plate (=IC).
Amplifiers
Both the S6X and the S7A Mk2 ADAM use the new generation of switching amps and power supplies (=PWM).
These are combined in an extremely powerful (1000 and 1500W rms respectively) yet cool amplifier assembly. Together with the built in overload protection circuits these amplifiers will run reliably and at constant safe operating temperatures not possible with conventional designs.
The amplifiers are of extremely low output impedance, leading to a damping factor >4.000, enabling them to strictly control the motion of the drive units.
The S6X: accuracy and power
The S6X is one of the most ambitious studio monitors available today. They can be found in some of the highest profile studios in the industry, from elite private studios to world class jazz, from rock and orchestral tracking and mixing facilities to high powered hip hop production rooms. The concept of the horizontal symmetry of the drivers is greatly affected by the generous proportions of the larger diaphragms, resulting in both exceptionally flat frequency response and extremely realistic dynamic reproduction across the entire audio spectrum. Numerous controls at the front panel allow detailed adaptations to different acoustic environments.
This main monitor offers very high accuracy and power in sheer abundance. SPL peaks beyond 120 dB are produced without any compression or harshness. The S6X is a top shelf choice for larger control rooms and film or sound studios.
Control panel (S6X & S7A Mk2)
Numerous controls on the front panel introduce a new degree of control for main monitors. Along with the input gain, there are level controls for each of the four drivers, shelving filters on both ends of the frequency spectrum, and three full parametric EQs (20-200Hz) that can be used to combat standing waves in the control room. The EQ can be bypassed individually or as a group so that their overall effect can be analyzed in direct comparison to the unaffected signal.
In large film score mixing rooms, it may be desirable to have a representation of the sound in the theatres. To meet the ISO 2969 Standard, the Dolby™ X-curve has to be applied.
Using pink noise, the X-curve engages a 3 dB per octave roll-off above 2 kHz. Both the S6X and S7A Mk2 have a switch that activates this filter, eliminating the need for external processing during the film mix.
A second switchable input on the front allows servicing without moving the unit.
All LED indicators can be dimmed if necessary.
Subwoofer |
| Number | 2 | Basket Ø | 12" (305 mm) | Voice coil Ø | 3" (75 mm) | Cone material | HexaCone | Woofer |
| Number | 2 | Basket Ø | 7.5" (186 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Midrange |
| Number | 2 | Type | X-ART | Diaphragm area | 26 inch² (16800 mm²) | Equiv. Diaphragm Ø | 5.5" (146 mm) | Velocity transform ratio | 3.5:1 | Diaphragm weight | 0.7 g | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Subwoofer | 2 | Type | PWM | Amp. power RMS / music | 500 W / 700 W | Woofer | 2 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Midrange | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Control panel |
| Input Sensitivity | ±10 dB | EQ 80 Hz (Quality / Hz / Level) | 3 x 0.2 - 20 / 20 - 200 / ±12 dB | High Shelf EQ > 6 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Sub Gain | ±4 dB | Mid-Woofer Level | ±2 dB | Mid level | ±2 dB | Tweeter gain | ±4 dB | Input connectors |
| Analog | XLR | General data |
| Panel | Front | X-Curve-Filter | yes | Frequency response | 23 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥123 dB | Max. peak | ≥133 dB | Crossover frequencies | 85 / 800 / 3100 Hz | Input impedance | 10 KOhm | Weight | 213.8 lb (97 kg) | Height x Width x Depth | 28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
* Active studio monitors with USB audio interface
* 4.25-inch magnetically shielded, inverted cone, copolymer woofer
* 1-inch silk dome high frequency driver
* 2 x 20 watts of internal stereo power
* Two combination mic and instrument/line inputs
* Two 1/8-inch stereo headphone outputs with level controls
* Includes Cakewalk® Sonar LE music production software
* Mic and instrument/line gain control with clip LED
* 16-bit 44.1kHz/48kHz
* Stereo RCA and 1/8-inch aux inputs
* 2-position switch for no-latency direct stereo and mono monitoring
* Mix control to balance computer and audio sources
* USB and speaker cable included
|
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
|
PRICE PER UNIT The smallest big sound ever... With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction. A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly. Stereolink A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily. Controls and Connectors The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting. Review: "Highly recommended“ "Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“ (Jon Chappell, Harmony Central, 03/10) Review: "...one of the best compact monitors“ "ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10) Mid-Woofer | | Number | 1 | Basket Ø | 4.5" (120 mm) | Voice coil Ø | 1" (25 mm) | Cone material | Carbon Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | A/B | Amp. power RMS / music | 25 W / 40 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 25 W / 40 W | Control panel | | Input Sensitivity | -∞ to +14 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 60 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.8 % | Long term output | ≥98 dB | Max. peak | ≥106 dB | Crossover frequencies | 2800 Hz | Input impedance | 10 KOhm | Weight | 10.1 lb (4,6 kg) | Magnetically shielded | No | Height x Width x Depth | 10" (252 mm) x 6" (150 mm) x 7.5" (185 mm) | Warranty | 5 Years | Delivery contents | Cinch-cable, Power cord, Manual |
|
PRICE PER UNIT The original A5 The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009). The new A5X The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that. Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this. A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics. Stereolink A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily. Controls and Connectors The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting. Review: "The A5X: a superb impression.“ "A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10) Mid-Woofer | | Number | 1 | Basket Ø | 5.5" (145 mm) | Voice coil Ø | 1.5" (32 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 50 W / 75 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 50 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.6 % | Long term output | ≥102 dB | Max. peak | ≥110 dB | Crossover frequencies | 2500 Hz | Input impedance | 30 KOhm | Weight | 14.6 lb (6,6 kg) | Magnetically shielded | No | Height x Width x Depth | 11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm) | Warranty | 5 Years | Delivery contents | Cinch-cable, Power cord, Manual |
|
PRICE PER UNIT The most powerful AX monitor With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields. The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill. Cabinet- and bass reflex-construction Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil. Amplification and controls With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series. On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies. There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application. Review: A8X: a "powerful link" between near- and midfield monitors! "The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010) Mid-Woofer | | Number | 1 | Basket Ø | 8.5" (220 mm) | Voice coil Ø | 1.5" (38 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 150 W / 225 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥112 dB | Max. peak | ≥120 dB | Crossover frequencies | 2300 Hz | Input impedance | 30 KOhm | Weight | 28.7 lb (13 kg) | Magnetically shielded | No | Height x Width x Depth | 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
Reviews
There are no reviews yet.