Content |
Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak
|
Twin Ported HiVe® II technology Sealed Mid-range TLE® 2 x 8" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Frequency Response: 28 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 118.6 dBA Power Handling (RMS): 300 W Recommended Amplifier Requirements (RMS): 100 - 300 W Bass Alignment: Twin Ported HiVe II Technology Sealed Mid-range TLE Mid / H.F Crossover Frequency: 4000 Hz Bass Low Pass Crossover Frequency: 550 Hz Driver Unit Complement: 2 x 8" long throw RDT bass drivers 1 x 4" RDT mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Including Fixed Plinth & Feet (H x W x D): 1113 x 410 x 470 mm (43 13/16 x 16 1/8 x 18 1/2) Weight (each) including Plinth: 43.8Kg (96.4lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Single Ported HiVe® II technology Sealed Mid-range TLE® 2 x 6.5” long-throw RDT® bass drivers 1 x 4” RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm (39 5/16 x 14 3/16 x 14 3/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
The largest speaker in the 600 Series. This floorstander is ideal for audiophile stereo and home theatre applications in larger rooms, delivering serious performance and amazing value.
The 683 S2 features a Decoupled Double Dome tweeter - technology evolved from Bowers & Wilkins CM10 speaker. The double dome design uses an extremely thin aluminium dome for lightness, surrounded by a thicker aluminium ring for rigidity. The result is a far more precise treble performance. And while the tweeter looks like it's part of the main speaker, it's physically separated in its own gel-filled cavity, so performance isn't hit by unwanted resonances or vibrations, for a more natural, spacious sound.
Serious and accurate bass performance is equally vital to such a room-filling speaker. That's why the 683 S2 features a new bass driver construction method, using a similar method of bracing to the tweeter with twin layers of aluminium. The richer, distortion-free bass response is sumptuous.
As well as new bass driver construction techniques and a new tweeter, brought in from Bower & Wilkins high-end series, the 683 S2 also boasts an FST Kevlar midrange driver. Serious technology, serious performance, but seriously affordable for a speaker of this calibre.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Mushrooms | Yes | FST | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone FSTTM midrange driver
Dual-layer aluminium cone bass driver
FlowportTM | Description | 3-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FSTTM midrange
2x ø165mm (6.5 in) aluminium cone bass | Frequency range | -6dB at 30Hz and 50kHz | Frequency response | 52Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | 89dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
| The body of the largest floorstanding speaker in the series has been manufactured from solid MDF panels and is extremely resistant to any kind of intrinsic resonance. As is the case for all other models, the baffle of the Monitor Supreme 2002 has been visually offset from the rest of the housing and is a feature that defines the design of this Magnat speaker.
The speaker, which is available in two high quality wood finishes, is equipped with two 200 mm bass drivers and one 170 mm midrange driver, which offer a particularly high level of dynamics in the bass segment and good precision over the entire frequency range. The coated 25 mm fabric dome with its newly developed tweeter flange also ensures significantly enhanced dispersion properties.
Description
Value
Principle
3 way bass reflex
Equipment
2 x 8” woofer
170 mm midrange
25 mm tweeter
Power Handling (RMS / Max.)
225 / 450 Watts
Sensitivity (2.8V/1m)
93 dB
Impedance
4 – 8 Ohms
Frequency Response
18 - 40000 Hz
Crossover Frequencies
350 Hz, 3.500 Hz
Recommended Amplifier Output
30 - 450 Watts
Dimensions (WxHxD)
267 x 1080 x 335 mm
Weight
23 kg
Cabinet surface
Ash decor black |
Frequency Response: 48 Hz - 35 KHz Sensitivity (1W@1m): 90 dB Nominal Impedance: 8 Ohms Power Handling Single (RMS): 100 W System Power Handling (RMS): 150 W Recommended Amplifier Requirements: 20 - 150 W Maximum SPL (dBA): 108 Bass Alignment: Front and rear ported Drive Unit Complement: 2 x 100mm (4“) MMP®II cone bass/mid driver. 1 x 25mm (1“) C-CAM® gold dome tweeter External Dimensions (H x W x D): mm (inches) 1000 x 125 x 140 mm (39 3/8 x 4 15/16 x 5 1/2) (Without spikes) Weight (each): Kg (lbs) 10.2 (22 1/2) User's Manual
|
Reviews
There are no reviews yet.