APEX ARGOS SOUND LEVEL CONTROLLER

No longer available!

1,680.20 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: ARGOS SOUND LEVEL Category:
With its concealed, authority seal-able and straightforward set-up controls, you’ll be able to quickly protect hearing and the environment, either on the road or in fixed installations. The Argos front panel clearly displays the level reduction applied. You can choose between different 3 modes of operation: use the measurement microphone provided, the line inputs or […]

 

Read more

With its concealed, authority seal-able and straightforward set-up controls, you’ll be able to quickly protect hearing and the environment, either on the road or in fixed installations. The Argos front panel clearly displays the level reduction applied.

You can choose between different 3 modes of operation: use the measurement microphone provided, the line inputs or the power amplifier inputs as level measurement reference.

Argosʼ unique servo-loop circuitry will preserve the whole audio signal quality and the entire dynamic range of the sound programme. Its unique silence detector makes it an indispensable tool for live music performance as well as interrupted recorded music, it will prevent pumping artefacts when the signal returns.

Configuring the Argos in fast mode and connecting it directly to your power amplifiers output, in parallel with the speakers, will protect your sound system against dangerous DJs, hard-rockers and extensive repair bills.

Use the Argos together with the Apex Hera, they will be your neighbours dream team !
Application

    Directive 2003/10/EC “Noise at work“
    fixed installation: bar, theatre, concert venue, …
    on the road: mobile DJ, live concert, …
    sound or broadcast studio to limit the sound level on monitor system

Features

Key features

    affordable price
    unique servo loop circuit allowing smooth operation (no compression or limiting artefacts in sound)
    proven to be most natural sounding leveller
    unique silence detection function with gain reduction hold circuit (avoiding pumping effect when sound comes back after a silence), ideal for live band
    3 sound level detection modes: microphone, line or loudspeaker
    direct connection to power amplifier output and fast operation mode allowing use as speaker protection
    may work independently or combined with the Apex Hera to increase the functions and capabilities

General features

    choose between smooth and fast operation
    sound level and gain reduction indicators
    concealed and authority seal able set-up controls
    the ‘Test’ button on front panel confirms the correct installation by muting the audio signal
    choice between A-weighted and C-weighted filters
    built-in pink noise generator for calibration
    balanced 3-pin XLR and RCA (cinch) connectors at inputs and outputs

Specifications

Input / Output
– Electronically balanced / floating
– RF suppression with LC filters
– Maximum level: +24 dBm
– Impedance: 10KOhm / 100 Ohm
XLR-3 type connector
connections: 1 ground, 2 hot (+), 3 cold (-)

Audio Specifications
– Frequency response: 10Hz – 40kHz + 0,2 dB
– TND + Noise:

Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “APEX ARGOS SOUND LEVEL CONTROLLER”

Your email address will not be published. Required fields are marked *

Quick Comparison

APEX ARGOS SOUND LEVEL CONTROLLER removeDYNACORD DSP-244 DSP Controller Speaker System removeOMNITRONIC DXO-26E Digital Controller stereo active crossover with 2 inputs 6 outputs (incl. software) removeDBX ZONEPRO 641 DIGITAL ZONE PROCESSOR removeBEHRINGER CX3400 V2 3-Way Stero/4-Way Mono Frequency Crossover with Limiters removeBEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover remove
NameAPEX ARGOS SOUND LEVEL CONTROLLER removeDYNACORD DSP-244 DSP Controller Speaker System removeOMNITRONIC DXO-26E Digital Controller stereo active crossover with 2 inputs 6 outputs (incl. software) removeDBX ZONEPRO 641 DIGITAL ZONE PROCESSOR removeBEHRINGER CX3400 V2 3-Way Stero/4-Way Mono Frequency Crossover with Limiters removeBEHRINGER CX2310 Super X Pro V2 Stereo 2-Way/Mono 3-Way Crossover remove
ImageOMNITRONIC DXO-26E Digital Controller stereo active crossover with 2 inputs 6 outputs (incl. software)behringer crossover 2-3way active limiter stereo monoBehringer CX2310 Super X Pro V2 1
SKUARGOS SOUND LEVELDSP-244DXO-26EDBX ZONEPRO 641E005259E013073
Rating
Price1,680.20 incl. GR VAT 1,598.89 incl. GR VAT 411.00 incl. GR VAT 659.00 incl. GR VAT 164.91 incl. GR VAT 127.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Flexible routing configurations for all standard mono and stereo output operating modes
  • 2 analog inputs and 6 analog outputs (XLR)
  • Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
  • Up to 30 user presets storable in the device via software
  • Input sensitivity digitally adjustable
  • Inputs and outputs with 4-digit LED level meter as well as clip and limit LED indicator
  • Mute switch with LED indicator per output
  • 7-band parametric EQ per output
  • Up to 7 ms signal delay adjustable for the outputs
  • Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
  • Switchable phase
  • Lock function for prevents undesired changes to settings
  • Sample rate: 67 kHz
  • (19") 48.3 cm rack installation 1 U
  • Compatible with Win XP, Win Vista, Win 7, Win 10, OS X 10,5 or better
  • 2-Way stereo or 3-way mono mode
  • Additional subwoofer output
  • Linkwitz-Riley filter with 24 dB / octave
  • Sub-woofer frequency range separately adjustable
  • Individual output gain controls and output mute switch for all bands
  • 2 Balanced XLR inputs with gold-plated contacts
  • 5 Balanced XLR outputs with gold-plated contacts
  • Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound
  • Easy-to-read status LEDs
  • Built-in power supply 100-240V, 50-60 Hz
  • Dimensions (H x W x D): 44 x 483 x 147 mm
  • Weight: 1.6 kg
Content

With its concealed, authority seal-able and straightforward set-up controls, you'll be able to quickly protect hearing and the environment, either on the road or in fixed installations. The Argos front panel clearly displays the level reduction applied.

You can choose between different 3 modes of operation: use the measurement microphone provided, the line inputs or the power amplifier inputs as level measurement reference.

Argosʼ unique servo-loop circuitry will preserve the whole audio signal quality and the entire dynamic range of the sound programme. Its unique silence detector makes it an indispensable tool for live music performance as well as interrupted recorded music, it will prevent pumping artefacts when the signal returns.

Configuring the Argos in fast mode and connecting it directly to your power amplifiers output, in parallel with the speakers, will protect your sound system against dangerous DJs, hard-rockers and extensive repair bills.

Use the Argos together with the Apex Hera, they will be your neighbours dream team !
Application

    Directive 2003/10/EC "Noise at work“
    fixed installation: bar, theatre, concert venue, ...
    on the road: mobile DJ, live concert, ...
    sound or broadcast studio to limit the sound level on monitor system

Features

Key features

    affordable price
    unique servo loop circuit allowing smooth operation (no compression or limiting artefacts in sound)
    proven to be most natural sounding leveller
    unique silence detection function with gain reduction hold circuit (avoiding pumping effect when sound comes back after a silence), ideal for live band
    3 sound level detection modes: microphone, line or loudspeaker
    direct connection to power amplifier output and fast operation mode allowing use as speaker protection
    may work independently or combined with the Apex Hera to increase the functions and capabilities

General features

    choose between smooth and fast operation
    sound level and gain reduction indicators
    concealed and authority seal able set-up controls
    the 'Test' button on front panel confirms the correct installation by muting the audio signal
    choice between A-weighted and C-weighted filters
    built-in pink noise generator for calibration
    balanced 3-pin XLR and RCA (cinch) connectors at inputs and outputs

Specifications

Input / Output
- Electronically balanced / floating
- RF suppression with LC filters
- Maximum level: +24 dBm
- Impedance: 10KOhm / 100 Ohm
XLR-3 type connector
connections: 1 ground, 2 hot (+), 3 cold (-)

Audio Specifications
- Frequency response: 10Hz - 40kHz + 0,2 dB
- TND + Noise:

Providing 48-bit filter algorithms, 24-bit AD/DA conversion and a dynamic range of 115 dB, the DSP 244 sets new standards for digital loudspeaker controllers and processors. The DSP 244 is an universal Digital Sound System Processor that provides 2 inputs and 4 outputs; plus internal summing of the inputs 1 and 2. Via matrix it is possible to assign the outputs to any input or to the sum of the inputs. It is further possible to establish the following configurations: Stereo or Dual 2-Way systems, 3-Way + Direct and 4-Way systems, each with Mono Subchannel, but also full range systems. High and low-pass filters are provided for the frequency crossover functions in all operation modes. The selection includes Linkwitz-Riley, Butterworth and Bessel type filters with switchable slopes between 6, 12, 18 and 24 dB/oct. A huge number of additional filters offers extremely flexible correction of the frequency response. Each input incorporates a 5-band equalizer, allowing to assign high and low-pass, high and low-shelving or parametric peak-dip filters to its individual filter sections. Next to the frequency crossover filters, four additional filters are employed in each output channel, which also can be set to work as high or low-pass, high or low-shelving filters, parametric peak-dip filters, or all-pass filters. Additional filtering is provided through 2. order high-passes for the realization of B-6 alignment, or special LPN-filters (Low-Pass Notch filters) for correcting the frequency and phase responses of optimally vented woofer cabinets. Each channel additionally provides a delay, a polarity switch, a programmable level control and a digital compressor / limiter while the master delays are located in the input channels. Datasheets / ManualsBrochure (309KB)

Mains voltage 90 - 250 V AC / 50 - 60 Hz Power consumption 20 watts Safety class I Inputs 2 x XLR IN, electronically balanced, transformer optional available 2 x XLR OUT (Direct Out) Input voltage (nominal) 1.55 V / + 6 dBu Max. input voltage 24.5 V / + 30 dBu Input impedance 20 kohms Common mode rejection > 40 dB AD-conversion 24-bit, Sigma-Delta, 128 times oversampling, linear phase Outputs 4 x XLR OUT, electronically balanced Output voltage (nominal) 1.55 V / + 6 dBu Max. output voltage 8.7 V / + 21 dBu Output impedance

Power supply: 100-240 V AC, 50/60 Hz 6 V DC 800 mA
Power connection: Mains input via Coaxial power connector (M) mounting version power supply cord with AC adapter (provided)
Frequency range: 10 - 30000 Hz
THD: <0,005 % at 1 kHz
DSP: Digital signal processor
Impedance: Input: 10 kOhm Output: 50 Ohm
Gain: Output: -50 dB to +12 dB
Filter: Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct
Delay: 0 - 5 ms
Dynamic range: Input: 114 dB Output: 110 dB
Sample rate: 67 kHz
Connections: Input: line via 2 x 3-pin XLR Output: line via 6 x 3-pin XLR
Crossover frequency: 20-20000 Hz
Max. level: Input: +22 dBu Output: +9 dBu
USB port: Typ B
PC connect: DXO Software via USB, firmware can be updated
Housing design: (19") 48.3 cm rack installation 1 U
Dimensions: Width: 48,3 cm Depth: 12,8 cm Height: 4,45 cm
Weight: 1,77 kg
Operating system: Win XP, Win Vista, Win 7, Win 10, OS X 10,5 or better
 

With 6 inputs and 4 outputs the dbx ZonePro? 640 and 641 provide flexible signal routing,
powerful DSP processing and multiple control interfaces for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the
highest quality tools available. Even the input and outputs connectors were chosen for their
standard usage and reliability. The ZonePro products offer Euroblock connectors for balanced
signals and RCA connectors for interfacing with consumer equipment often used in commercial
applications; there is also a simple analog input buss that allows inputs to be sent from one
unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing
tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated
and specific functions such as selectable paging microphone processing including Gating,
De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the
ZonePro products is the Routing module that provides of course Primary Source Selection
but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of
processing designed for commercial applications like our patent-pending AutoWarmth? function
that was co-developed with JBL to provide natural low frequency extension at any signal level.
Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system
optimization. With the ZonePro? every tool is at your disposal to maximize the response of
your system.
Beyond processing, the ZonePro? products offer multiple forms of control to further extend the
versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user
functions like source select and volume control to advanced system control including a built-in
Real Time Clock that can provide programmable system changes throughout the day or week.
For system setup and monitoring the ZonePro Designer software provides an intuitive interface
and a speedy setup Wizard for configuring and editing all system parameters.

The ZonePro? 640 and 641 will take your Commercial Audio system to the next level with advanced
processing, versatility and control.

? Advanced Feedback Suppression (AFS?)
? Autowarmth?
? Auto Gain Control
? Compression
? Limiting
? Noise Gating
? Notch Filtering
? Bandpass and Crossover Filters
? Parametric EQ
? Security Lockout
? Wall Panel Control
? RS-232 Control
? Windows? 2000 and XP GUI
? IEC, UL and CSA Approvals

Behringer CX-3400 3-Way Stero/4-Way Mono Frequency Crossover with Limiters The CX3400 is an active frequency crossover enabling 2 or 3-way stereo or even 4-way mono operation. Each band features two 24-dB Linkwitz-Riley filters, as well as individual IGC limiters, while the integrated delay enables flexible time alignment. Polarity switches for each output allow quick and easy runtime compensation for various driver and horn types.2 Respectively: 3-Way stereo or 4-way mono 24 dB / octave Linkwitz-Riley filter Mono-Sub switchable LF / HF gain regular / mutable CD horn EQ switchable Vertex frequency tunable Factor switching (10x) Multi-band limiter switch / variable (threshold) Limit display each way LF Delay (max 2ms / 60cm) Phase reverse 25 Hz subsonic filter, sym XLR in / out with multiband limiters Dimensions: 19", 1U, 147 mm case depth Weight: 1.7 kgCrossover 2-Way stereo or 3-way mono mode Additional subwoofer output Linkwitz-Riley filter with 24 dB / octave Sub-woofer frequency range separately adjustable Individual output gain controls and output mute switch for all bands 2 Balanced XLR inputs with gold-plated contacts 5 Balanced XLR outputs with gold-plated contacts Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound Easy-to-read status LEDs Built-in power supply 100-240V, 50-60 Hz Dimensions (H x W x D): 44 x 483 x 147 mm Weight: 1.6 kg
Weight2.50 kg5.00 kg2.08 kg4.00 kg4.30 kg1.6 kg
DimensionsN/AN/A53 × 25.5 × 8 cmN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 5.00 kg
Weight 2.08 kg
Dimensions 53 × 25.5 × 8 cm
Weight 4.00 kg
Weight 4.30 kg
Weight 1.6 kg

Recently Viewed Products