APOGEE JAM A/D Converter (for iPhone iPad)

Devices: iPad and iPhone 4
iOS version: 4.3 and later

Connection: Dock connector port (no batteries required)

*Software: Made for GarageBand

Computer: Mac, with an Intel processor
Memory: 1 GB minimum of installed RAM, 2 GB recommended
Mac OS version: 10.6.4 or later
Connection: USB 2.0 Full Speed

Software: GarageBand, Logic Pro, MainStage or any Core Audio compatible application

• PureDIGITAL instrument connection delivers pristine sound quality

• Designed for electric guitar and bass

• No confusing setup, you can start recording in minutes

• Works with GarageBand on iPad and iPhone or with any Core Audio compatible application on a Mac

• Control knob allows easy input level adjustment

• Multicolor LED for status indication and input level monitoring

• Studio quality instrument preamp with up to 40dB of gain

• High quality locking output connects directly to iPad and iPhone or USB port on a Mac

• 44.1kHz, 24-bit analog-to-digital conversion

• Auto Soft Limit for optimal input level

• Powered by connection to iPad, iPhone or Mac

• Made in the U.S.A.

• JAM
• 0.5m cable for connection to iPad and iPhone
• 1m cable for connection to Mac
• Quick start guide
• Velcro strip

TASCAMʼs iU2 is a premium sound quality audio interface for the iPad, iPhone and iPod Touch. It includes all of the features of TASCAMʼs best-selling USB audio interfaces, including a pair of great-sounding microphone inputs. The XLR inputs have phantom power for use with high-quality condenser microphones. These feed an onboard microphone preamp and A/D converter for better sound performance than those built into iPhone and iPad – true stereo recording with low noise and less tendency to distort. The inputs also accept line-level signals or you can plug a guitar or bass directly into your device.

In addition to compatibility with iOS devices, the iU2 also works with Mac and Windows computers. A zero-latency monitoring path allows musicians to hear themselves directly through the unit, without any distracting delay. MIDI in and out are provided to interface with synths and drum machines, and a digital output connects to digital mixers or recorders.

When youʼre ready to get serious with iPad music recording, step up to the pro-quality interface of TASCAMʼs iU2.

    Audio/MIDI Interface for Mac, Windows and iOS devices
    Compatible with iPhone, iPad and iPod Touch
    Two XLR mic inputs with phantom power
    Two balanced line inputs
    Instrument-level input for guitar or bass
    MIDI in and out
    Onboard A/D conversion for low-noise and distortion when recording with iOS devices
    Zero-latency direct monitoring
    S/PDIF Digital Output
    Includes USB cable, iOS dock connection cable, XLR to ¼” conversion cables

 User\'s Manual

With one simple plug-and-play FireWire connection, the V4HD turns your Mac or PC desktop or laptop computer into a powerful HD/SD video production workstation equipped with all the video and audio I/O you need.

Connect all your gear, from SD camcorders and monitors to today's latest professional HD cameras, video decks, LCD reference monitors and plasmas – all at the same time, with no cable swapping. Choose your input source, then log and capture HD or SD clips directly into Final Cut Pro or Premiere Pro.

In Final Cut Pro, the V4HD supports full-raster 1920x1080 HD capture and playback using Apple's ProRes 422 codec in both standard and HQ modes. The V4HD is the ideal all-in-one video capture solution for any ProRes workflow.

In both Final Cut Pro and Premiere Pro, the V4HD provides hardware-accelerated capture and playback of DVCProHD, DVCPro50 and DVCPro25 video streams, plus 8- and 10-bit uncompressed SD — all with convenient plug-and-play FireWire connectivity and CPU-efficient intra-frame editing.

The V4HD is ideal for a DVCProHD/P2 workflow because you can immediately play back P2 clips (either imported or ingested) with no transcoding necessary. Conversely, you can connect any SD or HD video source such as an HDV camera, legacy video deck or DVD player and then capture it directly as a DVCProHD clip in Final Cut or Premiere. Many cameras now feed their uncompressed SDI or component output directly from the camera's optics and imager, before compression, for the best-possible picture quality during capture with the V4HD. Need to bring SD material into your HD project? The V4HD even provides hardware-accelerated SD-to-HD up conversion for capturing SD sources in DVCProHD format.

As you edit, monitor your timeline on multiple HD and SD displays simultaneously with the V4HD's hardware-accelerated up-conversion, down-conversion and pull-down insertion or removal. Watch a variety of display formats side by side, from the pixel-for-pixel accuracy of a large plasma screen, to the color-corrected balance of an LCD reference monitor, to the real-world look of a consumer display. Use 32 channels of audio I/O to capture, monitor, mix and master multichannel surround sound for your productions at sample rates up to 192 kHz. Employ Sony 9-pin machine control for advanced Batch Capture and Edit to Tape operations. Keep everything frame-accurate using time code, video reference and audio word clock.

The V4HD delivers all this with one simple FireWire 400 or 800 connection — even to a laptop computer. With the V4HD handling video I/O via FireWire, your laptop's expansion slot can be used for high-performance video storage solutions.

From start to finish, the V4HD streamlines your video production workflow, with unified control over all your video gear from your computer desktop.

System Requirements for the V4HD

The V4HD has the following system requirements.

• 1 GB of RAM; 2 GB or more recommended
• Available FireWire 400 or 800 port
• Available USB port (for firmware updates)
• Large hard disk drive (preferably at least 500 GB)
• CD-ROM disc drive for installation

• PowerPC G5 CPU or faster; Intel CPU and multiple CPUs or multiple-core CPU highly recommended. An Intel CPU is required for ProRes support.
• Mac OS X version 10.4, 10.5, or 10.6; version 10.4.9 or later is required
• For use with Final Cut Pro 5.1 or later; Final Cut Pro 6.0 or later is required for ProRes. Final Cut Pro 7.0 or later is recommended under Mac OS X v10.6.

32-bit

• Pentium 4 CPU 1 GHz or faster; multiple processors or multiple cores highly recommended
• 32-bit operating system: Windows 7, Vista, or XP Professional SP3
• For use with Premiere Pro CS3 version 3.1 or later; CS4 support requires version 4.0.1 or later

64-bit

• Intel Core 2 Duo or AMD Phenom II processor
• 64-bit operating system: Windows 7, Vista, or XP
• For use with Premiere Pro CS4 version 4.2.1 or later; CS5 support requires Windows 7 or Windows Vista

Supported NVIDIA graphics cards for GPU acceleration

• Quadro FX line (3800, 4800 and 5800)
• GeFore GTX series (285 and 470)

The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.

Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.

iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.

Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.

You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.

iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.

• Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
• Maximum Input Level: from 30 mVpp to 6.9 Vpp
• Instrument Input Impedance: 620 kOhms
• Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 6 mVpp to 1.4 Vpp
• Microphone Input Impedance: approx 2 kOhms
• Gain Control Range: 47 dB
• Phantom Power: 48V +/-10%
• Input Noise: -97 dB RMS, -105 dB(A)
• Distortion (THD): 0.01%
• Frequency Response: 20Hz-20kHz +/- 0.5 dB
• Conversion: 24-bit A/D
• Sampling Rate: 44.1 and 48 kHz
• Battery: 9V (Alkaline suggested), needed for +48V phantom only

Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.

Mac®: Mac OS X 10.5 or later. One free USB port.

Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.

Meet Quartet The ultimate desktop audio interface and control center for iPad and Mac

Apogee Quartet is a professional USB audio interface designed to deliver the ultimate desktop recording experience to the iPad and Mac-based studio. Featuring 4 inputs and 8 outputs of Apogee\'s industry-leading AD/DA conversion technology as well as 4 world-class mic preamps, Quartet bridges the gap between the 2-channel Apogee Duet and Apogee\'s flagship interface, Symphony I/O.

Quartet for iPad and Mac features special circuitry designed to deliver professional performance for iPad use along with low latency USB 2.0 performance for Mac. Quartet\'s MIDI I/O connector lets you connect and power a Core MIDI compatible keyboard/controller while using Duet with your iPad or iOS device.

Apogee is an award-winning industry leader in digital recording technology with over 25 years of experience. Preferred by recording pros around the world, Apogee products like Duet, Ensemble and Symphony I/O have been instrumental in creating countless GRAMMY® and OSCAR® winning recordings and have set the industry standard in professional recording for over two decades. Quartet is built solidly on this reputation.

• First professional multi-channel audio interface for iPad
• Direct digital connection to iPod touch, iPhone, iPad
• Works with new iPhone 5, iPad (4th generation), iPad mini
  (Apple\'s Lighting to 30-pin adapter required - Sold separately)
• Works with GarageBand, Auria, MultiTrack and any Core Audio compliant app on iOS
• Works with GarageBand, Logic, Pro Tools, Ableton and any Core Audio compliant app on Mac
• Low latency monitoring, complete input/output control with Apogee\'s Maestro software (iOS & Mac)
• MIDI input/output (USB-A type connector)
• DC power supplies charge to iPod touch, iPhone or iPad
• USB 2.0 audio with 24-bit/192kHz A/D and D/A conversion
• 4 Analog inputs with world-class mic preamps and selectable 48v phantom power
• ADAT/SMUX digital Inputs
• Monitor control - up to 3 speaker sets
• 1 Independent 1/4" stereo headphone output
• QuickTouch pads for input/output selection and advanced control
• Legendary Apogee sound quality
• Designed in California - Made in the U.S.A.

• Computer: Intel Mac 1.5GHz or faster
• Memory: 2 GB RAM minimum, 4 GB recommended
• OS: 10.6.8, 10.7.4 or greater
• Connection and power: Any available USB port on a Mac
• Power: DC Power supply included

• iOS version: 5.1.1 and later
• Connection: 30-pin dock connector
• DC Power supply included

• iPod touch* (5th generation)

• iPhone 5*

• iPad* (4th generation)

• iPad mini*

* Requires Apple\'s Lightning to 30-pin adapter. Sold separately.

• iPod touch (4th generation)

• iPhone 4s

• iPhone 4

• iPad (3rd generation)

• iPad 2

• iPad

• Mac
  • Any Mac Core Audio compatible application
  • Recommended apps: Logic, GarageBand, MainStage, Final Cut, Pro Tools, Ableton Live, Digital Performer, Studio One, Cubase, and Nuendo

• iOS
  • Any iOS Core Audio compatible app. Recommended apps: GarageBand, Auria

• USB 2.0 High-speed Mac audio interface
• 4 Analog Inputs:
  • Combination line (balanced +20dBu max)
  • Mic/Instrument (+20dBu/+14dBu max)
  • 4 Microphone preamps with up to 75dB of gain
  • Selectable 48v phantom power, Soft Limit and phase invert
• Digital Inputs:
  • ADAT/SMUX Input, 8 channels, 2 Toslink connectors, 44.1kHz to 96kHz
  • MIDI input (USB-A type connector)
• 8 Analog Outputs:
  • 6 Balanced line outputs, +20 dBu maximum output level
  • 1 Independent 1/4" stereo headphone output
• Digital Outputs:
  • MIDI output (USB-A type connector)
  • Word clock output on BNC connector
• A/D and D/A conversion: 24 bit/192kHz
• 2 top panel high-resolution OLED displays
• Controller knob
• 6 touchpads for direct selection of inputs and outputs
• 3 assignable touchpads to control:
  • Mute Outputs
  • Dim Outputs
  • Sum to Mono
  • Clear Meters
  • Engage Speaker Set (allows monitoring of up to 3 pairs of speakers)

• EIN: 128dB (un-weighted) @ 60dB, 150Ohm input
• Max input level: +20dBu
• Input impedance: 3KOhm

• Max input level 14 dBu
• Input impedance: >2MOhm 

• Max input level (+4dBu ref): +20dBu
• Max input level (-10dBV ref):  +6dBV
• Input impedance: 5KOhm
• Freq resp 20 Hz -20Khz: > +/-0.2dB (@44.1Khz)
• Rel. THD + N: -106dB (@ 96Khz)
• Dyn. Range: 114dB (A-weighted)

• Max output level (+4dBu ref): +20dBu
• Max output level (-10dBV ref): +6dBV
• Line output impedance: 90 Ohm
• Max output level headphones: 19dBu
• HPH output impedance 30 Ohm.
• Freq resp 20Hz -20 Khz: > +/- 0.05dB (@44.1Khz)
• Rel. THD+N : -113dB (@96Khz)
• Dyn Range: 123dB (A-weighted)

• Quartet
• 2 meter USB Cable
• Universal Power Supply with standard 3 pin-IEC cable
• QuickStart Guide
• Instructions for download of software and complete documentation

Musical ideas can come anytime and anywhere. So why not be ready for them when they arrive? iRig Keys MINI is an ultra-portable 25-key MIDI controller for iPhone, iPad, iPod touch, Android and Mac/PC. Its 25 velocity sensitive mini-keys provide a generous 2 octave range (plus 1 note), which makes it small enough to easily stash in your laptop or gig bag or backpack with room to spare. Now you have the keys to capture your creativity no matter where your mobile life takes you.

iRig Keys MINI is incredibly easy to use. It connects directly to your iOS device via the included Lightning connector, to your Android device via the included OTG to Micro-USB cable and to your Mac/PC via the included USB cable. It can also connect to older iOS devices via an optional 30-pin cable. And you'll be ready to go right out of the box: No additional apps, software or drivers are necessary to get up and running. Its plug-and-play thanks to its MIDI and USB class compliance — no additional apps, software or drivers are necessary to get up and running.

• 25 velocity-sensitive mini-keys (2 full octaves range plus 1 note)
• Volume/Data knob (assignable)
• Back-lit, soft-touch Octave Up/Down buttons
• Core MIDI and USB class compliant - plug and play
• Powered from iOS device or Mac/PC
• Comes with SampleTank FREE iOS and iGrand Piano FREE apps (download from the App store)
• Comes with iGrand Piano FREE and iLectric Piano FREE for Android (download from Google Play or Samsung Galaxy Apps)
• Comes with free Mac/PC software: SampleTank 3 SE (download from IK User Area)
• Comes with free Mac/PC virtual instrument collections for SampleTank 3: The Grid plus 5 collections from Beats and Elektronika series (choose and download from IK User Area), plus 25 free Gear Credits to use in the Custom Shop
• Includes Lightning, OTG to Micro-USB and USB cables (optional 30-pin cable can be used for older iOS devices)