DAP AUDIO D2072 DSM-26 MKII Digital Speaker Manager 2in/6out

• 96 Khz Sample rate, 115 dB dynamic range
• S/N Ratio better than 110dB dBu
• USB at front with included user-friendly software
• 30 User presets
• Connect multiple units with RS485 (use optional interface D2071)   The DSM-26 MKII is a 2 in- and 6 output speaker manager that can be used for a wide range of applications. It has all the dynamics you need to tune many different types of speaker set-ups. At the front it has an USB connection port which enables you to program the DSM-26 MKII with the included software. The RS485 interface gives you the possibility to connect and program multiple units at once. It has a powerful chipset that makes it possible to use all filter slopes until 48 dB per octave and all equalizer, delay sections without running out of memory or calculations. The DSM-26 MKII is suitable for professional PA systems, line arrays and audio installations, as well as sound distribution networks. The MKII version has been improved on the following points:

• Adjustable noise gate on inputs
• System separate function lock
• Improved software GUI and functions
• Improved software resolution
• Upgraded, more stable, DSP Specifications DSP: 96 kHz, 32 bits floating point DSP, 192 kHz
AD/DA Converters: 24 bitsInput gain: -80dB - +12dB, step @ 0,1 dB
Input Impedance: Balanced 20kΩ
Output gain: -80dB - +12dB, step @ 0,1 dB
Output Impedance: Balanced 100Ω
CMRR: >70dB@1kHz
Input range: ≤ ±25 dBu
Frequency response: 20Hz – 20kHz ±0,5dB
S/NR: >110dB
THD: 80dB@1kHz

6-Bands Input EQ
Bandwidth: 0,05 to 3 octaves in 0,05 octave steps
EQ gain control: -20 dB to +20 dB
EQ frequencies: 19,7Hz to 20kHz in 1/24 octave steps

Delay
Input delay: Channel independent from 0 to 1000 mS
Output delay: Channel independent from 0 to 1000 mS

6-Bands Output EQ
Type: Low Shelf, High Shelf and Parametric
Lo/High shelf slope: 6 dB/12 dB
EQ Bandwidth: 0,05 to 3 octaves in 0,05 steps.
EQ gain control: -20 dB to +20 dB on al EQ types.
EQ frequencies: 19,7 Hz to 20 kHz in 1/24 octave steps

Crossovers
Types: Linkwitz Riley, Bessel and Butterworth
Slopes: 12, 18, 24, 30, 36, 42, 48 dB/octave
Frequencies: 19,7 Hz to 20 kHz in 1/24 octave steps
Limiter
Threshold points: -40 to +20 dBu in 0,5 dB steps
Attack times: 0,3 mS to 200 mS
Attack time steps: 0,1 mS steps from 0,3 to 1 mS, 1 mS steps from 1 to 100 mS
Release times: 50 ms – 5000 ms

Miscellaneous:
Memory Storage: 30 User presets
Display: 2x 24 dot matrix characters
Latency: 2,61 mS
USB Interface: 1x Front
RS-485 interface: 2x Back
Power Supply: 110/220 Volt AC, 50/60 Hz
Power Consumption: 25 Watt
Fuse: F0,5A/250V
Dimensions: 482 x 44 x 192 mm(WxHxD)
Net weight: 3,4 kg
Accessories: Power-cable, USB cable, Software
RS485 interface not included, order code D2071

Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors. A large part of DC-Oneʼs development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Free. PC-Editor software is available, or the DC-One can be operated via the front panel.   A/D Conversion    24-Bit Delta-Sigma
A/D Conversion    24-bit/sigma-delta (linear phase) 128 times oversampling
Analog Inputs    2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
Analog Outputs    6 XLR (Electronically Balanced)
Control Protocol    Front Panel USB Connector
D/A Conversion    24-bit/sigma-delta 128 times oversampling
D/A Conversion    24-Bit Delta-Sigma
Data Format    24-Bit
Digital Inputs    1 XLR AES/EBU (2 Ch)
Dynamic Range    111 dB (unweighted, band limited 22 Hz - 22 kHz)
Electronics Type    Processor
FIR-Drive    No
Frequency Response    10 Hz - 22 kHz (±0.5 dB)
Input Impedance (Balanced)    10 kΩ
Internal Processing    32-Bit Floating Point
Mains Voltage    100-240 VAC
Maximum Input Voltage    8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Maximum Output Voltage    8.7 V / +21 dBu
Nominal Input Voltage    1.23 V / +4 dBu
Nominal Output Voltage    1.23 V / +4 dBu
Output Impedance (Balanced)    50 Ω
Power Consumption    25 W
Sample Rate    48 kHz
THD+N    < 0.01% (band limited 22 Hz - 22 kHz)
Height    1RU 44.45 mm (1.75“)
Width    482.6 mm (19“)
Depth    355.6 mm (14“)
Weight Net    4.6 kg (10.14 lbs) 

Providing 48-bit filter algorithms, 24-bit AD/DA conversion and a dynamic range of 115 dB, the DSP 244 sets new standards for digital loudspeaker controllers and processors. The DSP 244 is an universal Digital Sound System Processor that provides 2 inputs and 4 outputs; plus internal summing of the inputs 1 and 2. Via matrix it is possible to assign the outputs to any input or to the sum of the inputs. It is further possible to establish the following configurations: Stereo or Dual 2-Way systems, 3-Way + Direct and 4-Way systems, each with Mono Subchannel, but also full range systems. High and low-pass filters are provided for the frequency crossover functions in all operation modes. The selection includes Linkwitz-Riley, Butterworth and Bessel type filters with switchable slopes between 6, 12, 18 and 24 dB/oct. A huge number of additional filters offers extremely flexible correction of the frequency response. Each input incorporates a 5-band equalizer, allowing to assign high and low-pass, high and low-shelving or parametric peak-dip filters to its individual filter sections. Next to the frequency crossover filters, four additional filters are employed in each output channel, which also can be set to work as high or low-pass, high or low-shelving filters, parametric peak-dip filters, or all-pass filters. Additional filtering is provided through 2. order high-passes for the realization of B-6 alignment, or special LPN-filters (Low-Pass Notch filters) for correcting the frequency and phase responses of optimally vented woofer cabinets. Each channel additionally provides a delay, a polarity switch, a programmable level control and a digital compressor / limiter while the master delays are located in the input channels. Datasheets / ManualsBrochure (309KB)

Mains voltage 90 - 250 V AC / 50 - 60 Hz Power consumption 20 watts Safety class I Inputs 2 x XLR IN, electronically balanced, transformer optional available 2 x XLR OUT (Direct Out) Input voltage (nominal) 1.55 V / + 6 dBu Max. input voltage 24.5 V / + 30 dBu Input impedance 20 kohms Common mode rejection > 40 dB AD-conversion 24-bit, Sigma-Delta, 128 times oversampling, linear phase Outputs 4 x XLR OUT, electronically balanced Output voltage (nominal) 1.55 V / + 6 dBu Max. output voltage 8.7 V / + 21 dBu Output impedance

• XLR balanced ins and outs
• Mode switch for stereo 2-way or mono 3-way operation
• Low frequency summed (subwoofer) output
• x10 range switch on both channels
• 40Hz high pass (low cut) filter both channels
• Phase reverse switch on all outputs
• Individual level controls on all outputs
• 24dB per octave Linkwitz-Riley filters (the professional standard)
• Stereo/Mono status LEDs indicate the selected mode
• dbx® 2 year parts and labor as standard
• CSA NRTL/C approved
• CE compliant

With 12 inputs and 6 outputs and Ethernet control the dbx ZonePro? 1260 and 1261
are the newest members of the ZonePro? family providing a complete suite of signal
processing and control for Commercial Audio applications.
Designed to offer superior system sonic performance and flexibility, the 1260/1261 deliver
the highest quality tools available. Even the input and outputs connectors were chosen for
their standard usage and reliability. The ZonePro products offer Euroblock connectors for
balanced signals and RCA connectors for interfacing with consumer equipment often used
in commercial applications; there is also a simple analog input buss that allows inputs to be
sent from one unit to the next for unit and job scalability. The 1260 and 1261 provide every
necessary processing tool, from the input processing like gain control and EQ available on all
inputs to highly sophisticated and specific functions such as selectable paging microphone
processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback
Suppression. The heart of the ZonePro products is the Routing module that provides of course
Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs
also offer a wealth of processing designed for commercial applications like our patent-pending
AutoWarmth? function that was co-developed with JBL to provide natural low frequency extension
at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay
for system optimization. With the ZonePro? every tool is at your disposal to maximize the response
of your system.
Beyond processing, the ZonePro? products offer multiple forms of control to further extend the
versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user
functions like source select and volume control to advanced system control including a built-in
Real Time Clock that can provide programmable system changes throughout the day or week.
For system setup and monitoring the ZonePro Designer software provides an intuitive interface
and a speedy setup Wizard for configuring and editing all system parameters. The addition of
Ethernet control means that not only will it work with standard network equipment, but it can also
be accessed from remote dialup locations or from wireless access points.
The ZonePro? 1260 and 1261 will take your Commercial Audio system to the next level with advanced
processing, versatility and control.
 
? Advanced Feedback Suppression (AFS?)
? Autowarmth?
? Auto Gain Control
? Compression
? Limiting
? Noise Gating
? Notch Filtering
? Bandpass and Crossover Filters
? Parametric EQ
? Security Lockout
? Wall Panel Control
? RS-232 Control
? IEC, UL and CSA Approvals
 
ZonePro? 1260/1261 Specifications    
      
ANALOG INPUT
Number of Inputs:
12 Total (2) Switchable mic or line, (8) RCA, and (1)
S/PDIF
Connectors:
Euroblock (Line and Mic) RCA (Source)
Type:
Impedance (Euroblock):
> 50kΩ Balanced, >25kΩ Unbalanced, RF Filtered
Impedance (RCA):
>25kΩ Unbalanced, RF Filtered
Max input line level:
+20dBu Mic/Line, +12dBu RCA
CMRR:
> 40dB, typically >55db @ 1kHz
Mic Pre gain:30 to 60dB
Mic EIN:
> 118dB, 22Hz-22kHz, 150Ω Source Impedance
Mic Phantom Power:
15V
 
ANALOG OUTPUTS
Number of Outputs 6
Connectors: Euroblock
Type:
Electronically balanced, RF filtered
Impedance:
120 ohms balanced, 60ohm unbalanced
Max Output Level: +20dBu
 
A/D PERFORMANCE
Type:
dbx Type IV? conversion system
Dynamic Range line:
>113 dB, A-weighted, >110 dB unweighted
Type IV dynamic range:
>119 dB, A-weighted, 22kHz BW
>117 dB, A-weighted, 22kHz BW
Sample Rate: 48kHz
 
D/A PERFORMANCE
Dynamic Range:
112 dB A-weighted, 109dB unweighted
 
SYSTEM PERFORMANCE
Dynamic Range:
>110 dB A-weighted, >107dB unweighted
THD+N:
0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response:
20Hz - 20kHz, +/-0.5dB
Interchannel Crosstalk:
>80dB typical
Crosstalk input to output:
>80dB
Propagation Delay
0.6 msec
 
POWER REQUIREMENTS
Operating Voltage:
100-240 VAC, 50/60Hz
Power Consumption:
27 Watts
 
Physical:
Weight:
6.8 lbs.(3.1 kg) Shipping weight 8.8 lbs. (4.0 kg)
Dimensions:
1.75? H x 5.75? D x 19? W