Price | €85.93 Original price was: €85.93.€81.64Current price is: €81.64. incl. GR VAT | €1,834.55 Original price was: €1,834.55.€1,786.00Current price is: €1,786.00. incl. GR VAT | €224.06 Original price was: €224.06.€157.00Current price is: €157.00. incl. GR VAT | €1,456.00 Original price was: €1,456.00.€1,399.00Current price is: €1,399.00. incl. GR VAT | €156.00 Original price was: €156.00.€121.51Current price is: €121.51. incl. GR VAT | €94.50 Original price was: €94.50.€77.09Current price is: €77.09. incl. GR VAT |
Content |
PR-52
50W - This set contains 2 pcs. White
2-way passive plastic vented speaker system,
including mounting/hanging brackets
Woofer: 5.25“, 16 Ohm, Rubber Edge
Tweeter: 12,6 mm Mylar Dome Tweeter
Nominal Impedance: 16 Ohm
Power Handling: 50 Watt Continuous
Freq. Range (-10 dB): 50 – 20.000 Hz
Dimensions (LxWxH): 185 x 175 x 250 mm
Net Weight: 2,5 kg
|
The DYNACORD VL262W 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL262 is ideally suited to be used in most demanding applications. The VL262W is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two ultra-low distortion DND 6130-16 Neodymium transducers are used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Cabinet Full-Range Configuration passive 2-Way Nominal Impedance 8 ohms Rated Power RMS 300 watts Program Power 600 watts Peak Power 1200 watts SPL 2,83 V/1m 97 dB max. SPL 1m (calc. with Peak) 125 dB Freq. Range (-10 dB) 90Hz - 20Hz Coverage Angle nom. 90° x 40° Passive X-Over Frequency 2,2 kHz VCT Protections Halogen Components HIGH Ev DH 3 Order-# D353078 Components LOW 2x DND 6130-16 Order-# D366420 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensions (WxHxD) mm 217x 543x 230 Net Weight 10 kg Enclosure Material Birch Plywood
|
- Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
- Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
- High 30W rated input power and 91 dB output sound pressure level.
- Durable, acoustically efficient polypropylene enclosure.
- Optional wall/under-eaves mounting bracket.
Specification |
|
Enclosure Type |
Bass-reflex type |
Speaker Component |
Low Frequency; 13cm cone speaker (drip-proof)/High Frequency; 3cm dome speaker (film diaphragm) |
Impedance |
100V Line; 330 Ω (30W), 500 Ω (20W), 1k Ω (10W), 2k Ω (5W)/70V Line; 170 Ω (30W), 330 Ω (15W), 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W) |
Rated Input Power |
30W |
Output Sound Pressure Level |
91 dB (1W/1m)** |
Crossover Frequency |
4kHz (passive network) |
Frequency Response |
100-20,000Hz (-10dB), 150-13,000Hz (-3dB) |
Input Connector |
Push terminal |
Enclosure Material |
Polypropylene resin |
Color |
Dark gray |
Dimensions |
(W x H x D): 250 x 157 x 169mm |
Weight |
approx. 3.9kg |
|
** Pink noise of 330~3,300Hz |
|
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL62 2-Way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL62 is ideally suited to be used in most demanding applications. The VL62 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies one ultra-low distortion DND 6130-16 Neodymium transducer is used. High frequencies are radiated from a rotatable HPT94 constant directivity horn equipped with an Electro-Voice DH3 driver. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available.
Cabinet Full-Range Configuration Passive 2-Way Nominal impedance 16 Ohms Rated power RMS 150 Watts Program power 300 Watts Peak power 600 Watts SPL 1W / 1m 4V / 16Ohm 94 dB Max. SPL 1m(calculated with peak power) 122 dB Frequency range ( -10dB ) Full range 90Hz - 20kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 60Hz - 20kHz Coverage angle nominal 90° *40° Passive crossover frequency 2.2kHz Voice coil tracking protection Halogen Component HIGH Electro-Voice DH 3 Order No. 353 078 Component LOW DND 6130-16 Order No. 366 420 Connectors Full-Range 1+, 1- Wired through 1+, 1- Connector modelSpeakon 2x NL4 MPR Dimensions (WxHxD) 217x375x230 mm Shipping weight 10 kg Net weight 8 kg Enclosure material Birch plywood Finish White 2-component paint Grille Powder coated steel, acoustic foam
| Behringer 1C 100W-4Ω Monitor Speakers
- Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
- High power handling capability (100 W / IEC268-5) produces full-range output with extremely low distortion
- Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
- Ultra-linear frequency range from 60 Hz to 23 kHz
- Phase-optimized and high-precision crossover for absolute phase linearity
- Auto-overload protection prevents tweeter damage and resets automatically
- Bracket for wall/ceiling mounting included
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Introducing the Stylish MONITOR 1C-BK Monitor Speakers from BEHRINGER
The MONITOR 1C-BK 2-way monitor speakers offer accurate sound reproduction combined with a great design to suit your fixed installations, stereo and surround applications, home recording studios as well as audio and video productions.
Each of these 100-Watt speakers has a powerful 5 ½" woofer with a lightweight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity and auto-overload protection that resets automatically. The result: full-power, ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. They come with convenient mounting brackets for easy installation.
Looking for great sound and style? The MONITOR 1C-BK speaker definitely got it!
SPECIFICATIONS
Connector type Clip terminal
Wire diameter
Power capacity (prg.) 100 W (IEC 268-5)
Impedance 4 Ω
Frequency range 60 Hz to 23 kHz (-10 dB)
Nominal sound pressure level (SPL) 86 dB*W/m (program, bandwidth 100 - 5000 Hz on axis, full space)
Max. short term acoustic output 112 dB @ 1m (on axis, half space)
Tweeter ½“
Woofer 5 ½“
Crossover frequency 5000 Hz
Dimensions (H x W x D) 8.9" x 5.9" x 5.6" (225 x 150 x 142 mm)
Weight approx. 4 lbs each (1.8 kg each) | Price per speaker
Specifications :
150 Watts Continuous Power Handling
Professional Drivers and Crossover Network
Included Mounting Bracket
Transparent and Faithful Sonic Performance
Magnetically Shielded Transducers
SonicGuard™ Overload Protection
Available in Black or White Finishes
Frequency Range
(-10 dB)
:
80 Hz to 20 kHz
Frequency Response
(± 3 dB)
:
I00 Hz - 18 kHz
Power Capacity
:
I50 W
Sensitivity
:
87 dB SPL, 1 W, 1 m (3.3 ft)
Maximum SPL
:
108 dB continuous, 114 dB peak
Directivity Factor (Q)
:
6.0
Directivity Index (DI)
:
7.8
Nominal Impedance :
4 ohms
Crossover Frequency :
4.2 kHz
Overload Protection :
Full-range SonicGuard™ power limiting to protect network and transducers
Transducers
LF Drivers :
135 mm (5.25 in) low
frequency loudspeaker
HF Drivers :
19 mm (.75 in) polycarbonate
dome tweeter
Input Connectors :
Spring-loaded terminals
Enclosure
Enclosure Material :
Polypropylene Structural Foam
Finish :
Black (C1Pro) or White (C1Pro-WH)
Dimensions :
235 mm x 159 mm x 143 mm
(9.3 in x 6.3 in x 5.6 in)
Net Weight (each) :
1.8 kg (4 lb)
Shipping Weight (pair) :
4.6 kg (10 lb)
Included Accessories :
Mounting Bracket Assembly
Optional Accessories :
MTC-1A ultra-duty mount bracket
MTC-8 heavy-duty mounting bracket |
Reviews
There are no reviews yet.