| Content | Professional monitoring made easy
Looking for a stage monitor engineered to satisfy professional demands for performance
and sound without requiring additional power amps, crossovers and cables? Want a
versatile enclosure suitable for use as a side-fill, front-fill or a FOH system for (almost)
unplugged gigs? Then welcome to D.A.R.T. D.A.R.T packs a high-quality preamp, controller,
active crossover, two power amps, a 12" speaker and a 1" CD horn in a compact, low-profile
monitor housing. With HK AUDIO OFR? technology on board, these enclosures project
extraordinarily rich, transparent sound, even at very high levels.
And their remarkably linear frequency response enables high volumes with reduced feedback
sensitivity. Though D.A.R.T has been optimised for use as a stage monitor, its multi-functional
housing shape and the integrated DuoTilt? pole-mount cup allow it to be used for additional
applications. With all this and a full-featured input stage (to including a microphone input for
the mayor?s address), D.A.R.T is a high-end sound-reinforcement ?Swiss Army knife? for
literally every occasion.
Facts & Features:
The right solution for every musician who wants hassle-free professional monitoring
Two-way active circuitry featuring OFR? technology
250 watts RMS digital power amp for the 12" speaker
Power amp with 60 watts RMS for the 1" HFdriver
Multi-band limiting for key frequency ranges
Two-band EQ included
Balanced, separately adjustable microphone and line inputs and additional RCA input
HK AUDIO DuoTilt? for directing sonic energy towards the audience when used on a stand
TECHNICAL DATA:
Frequency response 80 Hz - 19 kHz +/- 3 dB
Axial sensitivity 1W/1m* 105 dB
Maximum SPL @ 1m* 123 dB @ 10% THD
Bass power amp 1x 250 W RMS
Mid/high power amp 1x 60 W RMS
Active protection circuitry Multi-band -limiter
Low/mid driver 1x 12" HK Audio Custom
HF horn/driver 1"
Directivity 60° x 40° CD horn
Crossover frequency 2 kHz; 24 dB per octave, passive
HF protection (passive) Dynamic protection circuitry
Speaker stand mounting collar DuoTilt?, 36 mm
Connectors 1x XLR Mic In
Weight 19.8 kg / 43.6 lbs.
Dimensions (WxHxD): 56.1 cm x 40.5 cm x 34 cm
Dimensions (WxHxD): 22" x 15 7/8" x 13 3/8" |
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
General Specs
800 Watt Peak, 400 Wat RMS
129 dB max SPL
45 Hz - 20 kHz frequency response
12" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil
Acoustical Specs
Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 12“, 2.5" voice coil
Inputs/Outputs
Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter
Amplifier Specifications
Total power: 800 W PEAK
High frequencies:200 W PEAK
Low frequencies: 600 W PEAK
Total power: 400W RMS
High frequencies:100 W RMS
Low frequencies: 300 W RMS
Cabinet Specs
Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black
Size/Weight
Height: 318/12.51 mm/inch
Width: 594/23.38 mm/inch
Depth: 400/15.74 mm/inch
Net Weight: 18/39.68 kg/lbs |
The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Main PA in small venues
General Specs
- 1400 Watt Peak, 700 Watt RMS digital bi-amplification
- 129 dB max spl
- 60° x 60° constant directivity horn
- 12" High power neodymium woofer, 2.5" voice coil
- 1.7 kapton dome, 1" exit, neodymium high frequency driver
- DSP processing, floor - fre field equalization, soft limiter and protection
- Combo xlr/jack input, xlr signal output
Acoustical Specs
- Frequency Response -3 dB:50Hz ÷ 20000 Hz
- Max SPL:129dB
- Horizontal coverage angle:60°
- Vertical coverage angle:60°
- Compression Driver:1.7 kapton dome, 1" exit, neodymium
- Woofer:12" neo high power woofer, 2.5" voice coil
Processor Section
- Limiter:Soft Limiter
- Controls:Freefield, floor
Amplifier Specifications
- Total power:1400W PEAK
- High frequencies:400 W PEAK
- Low frequencies:1000 W PEAK
- Total power:700W RMS
- High frequencies:200 W RMS
- Low frequencies:500 W RMS
Cabinet Specs
- Cabinet Material:Baltic Birch
- Handles:1 on side
- Pole Mount/Cap:yes
- Grille:steel
Size/Weight
- Height:324/12.7mm/inch
- Width:550/21.6mm/inch
- Depth:417/16.4mm/inch
- Net Weight:16,5/36.3kg/lbs
|
StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.
The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.
| Cabin Type: | Wooden, 3-way | | Monitor Use: | Yes | | Amplifier: | 1,400‐watt | | LF/MF, Woofer: | 2x10” | | HF, Horn: | 1” exit compression driver | | DSP Processor: | Yes | | Frequency Response: | 47 Hz to 18 kHz | | Dimensions: | 312 mmx861 mmx 312 mm | | Weight: | 26.1 kg | | Color: | Black |
|
The LDMON101A features a high end 10" co-axial speaker with a 1" compression driver and delivers 150 W RMS output power.
The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also features a softclip-limiter as well as a volume control.
The Housing was built out of a high quality plywood with a high resistance textured finish. The stabile front guard ideally protects the speakerbox.
Specifications LDMON101A: - Model Name: LDMON101A
- Type: Bass Reflex
- Components:
- Woofer / Compression Driver: 10" / 1" Coaxial Custom Made Speaker
- Amplification: Class A / B
- Dispersion: 75° x 75°
- Power: 150 W RMS
- Frequency Range: 90 Hz- 20 Khz
- SPL (1 W / 1 m): 99 dB
- Max. SPL: 121 dB
- Protection: Limiter, Circuit and Overcurrent
- Controls: Volume, On/Off Switch
- Indicators: Signal, Power, Limit
- Connectors:
- Input: Line: XLR /6,3 mm jack (combo)
- Output: Line: XLR
- Power Supply: Transformer
- Cabinet Material: 15 mm Plywood
- Cabinet Surface: Painting
- Dimensions: 360 x 370 x 425 mm
- Features: Ergonomic milled handles, VOLEX power plug input / output
|
The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.
| Features |
|---|
| 750 Watt Digipro digital amplifier | | 130 dB max spl | | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | | 12" woofer, high power neodymium 3" voice coil | | 1" HF driver, titanium dome, neodymium 1.75" voice coil | | PFC power factor correction |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | | Max SPL: | 130 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Compression Driver: | 1" neo, 1.75" v.c. | | | Woofer: | 12" neo, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | ba l/ unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1700 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, side / floor, contour | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | 6 x fly tracks | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 646 / 25.43 mm/inch | | | Width: | 385 / 15.15 mm/inch | | | Depth: | 375 / 14.76 mm/inch | | | Net Weight: | 21.2 / 46.73 Kg/Lbs |
|
Reviews
There are no reviews yet.