| Content |
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 15 X
Description The multi-talented prodigy in the PREMIUM PR:O family. The
Description housing shape enables the PR:O 15 X to be used as a main
Description PA or a monitor speaker.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 60 Hz ? 19 kHz
Frequency response @ -10dB 53 Hz- 19 kHz
Speaker 1x 15?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Rigging points side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD) 47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD) 18 1/2? x 24 1/4? x 17 1/2?
Weight 21.6 kg
Weight 47.52 lbs
|
Chassis Size 304.8 mm (12“)
Color Black
Directivity Index 11.6 dB
Input Connections 2 four-pin Speakon
Speaker Type Two-Way
Speaker Type Wedges
Frequency Response (-3 dB) 65 - 16000 Hz
Frequency Response (-10 dB) 50 - 20000 Hz
Internal Crossover No
Sensitivity 1 W/1 m 98 dB
Max. SPL/1m (calc) 129 dB
Coverage
(Nominal -6 dB) H° 55 °
Coverage
(Nominal -6 dB) V° 80 °
Rotatable Horn No
LF Transducer DL12ST
Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts
High Frequency Power Handling (Continuous/Program/Peak) 75 Watts
LF Nominal Impedance 8 Ω
HF Transducer ND6-16
HF Nominal Impedance 16 Ω
Minimum Impedance 8.2/10.5 Ω
Enclosure Material 13-ply birch plywood with Futura
Flying No
Outdoor No
Height 584 mm (22.99“)
Width 449 mm (17.68“)
Depth 313 mm (12.32“)
Weight Net 21.9 kg (48.28 lbs) |
PRICE PER UNIT
The most powerful AX monitor With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields. The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill. Cabinet- and bass reflex-construction Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil. Amplification and controls With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series. On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application. Review: A8X: a "powerful link" between near- and midfield monitors! "The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010) | Mid-Woofer |
| | Number | 1 | | Basket Ø | 8.5" (220 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 150 W / 225 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 38 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥112 dB | | Max. peak | ≥120 dB | | Crossover frequencies | 2300 Hz | | Input impedance | 30 KOhm | | Weight | 28.7 lb (13 kg) | | Magnetically shielded | No | | Height x Width x Depth | 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) | | Warranty | 5 Years |
| Delivery contents | | Power cord, Manual |
|
Features : Specifications :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
Twelve M10 suspension points.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Frequency Range ( –10 dB) : 41 Hz-20 kHz
Frequency Response (± 3 dB) : 55 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 96 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 131 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)
Net Weight : 26 kg (58 lbs
| Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
Descriptions:
The first in the MX line, the 12MX redefines the term multi-purpose. Due to its unique cabinet geometry, the 12MX is at home either on the stage as a monitor, or as a main front of house speaker. Making this enclosure even more unique is the addition of our proprietary internal crossover, allowing bi-amped or passive operation. Adamson's Acoustic Waveguide is employed in the 12MX and its integral fly points and pole mount makes installation fast and effective. As with all Adamson enclosures, frequency response, output and beamwidth control are second to none. Arguably the most versatile cabinet on the market today, the 12MX sets new standards for multi-purpose speaker enclosures.
Applications:
Low Profile Stage Monitor
Arrayable Front of House Enclosure
Theater
Houses of worship
Corporate
FEATURES:
Unique Cabinet Geometry (extremely low profile)
Adamson AW12 Low Frequency Driver
1.5" High Frequency Compression Driver
Bi-amped Or Passive Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points And Pole Mount
Durable Dual Component Finish
Roadworthy Construction
Weight: 35
|
Reviews
There are no reviews yet.