M-AUDIO BX Subwoofer 10 inch 240W

Discontinued

340.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Features 10” long-excursion low-frequency driver with oversized magnet 240-watt Class A/B amplifier with all-discrete transistor design Stereo inputs: XLR; 1/4″ balanced/unbalanced; RCA Stereo satellite outputs: XLR; 1/4″ balanced/unbalanced Internal crossover offers variable frequency Included subwoofer bypass footswitch High-density bass reflex cabinet with internal bracing Removable grill and detachable feet 180 phase reverse switch Specifications Type: […]

 

Read more

Features
  • 10” long-excursion low-frequency driver with oversized magnet
  • 240-watt Class A/B amplifier with all-discrete transistor design
  • Stereo inputs: XLR; 1/4″ balanced/unbalanced; RCA
  • Stereo satellite outputs: XLR; 1/4″ balanced/unbalanced
  • Internal crossover offers variable frequency
  • Included subwoofer bypass footswitch
  • High-density bass reflex cabinet with internal bracing
  • Removable grill and detachable feet
  • 180 phase reverse switch

Specifications

  • Type: Bass-reflex active powered subwoofer
  • Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround
  • Frequency Response: 20-200Hz (-3dB)
  • Crossover: HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment
  • Input Sensitivity: 80mV pink noise input produces 100dBA output SPL at one meter with vol
  • Adjustable Gain: (-30dB to +6dB)
  • Amplifier: 240 watts average power into 4, discrete transistor design
  • Signal-To-Noise Ratio: 96dB (A-weighted)
  • THD at Rated Power, Mono Mode: 0.019%
  • Inputs: Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA
  • Outputs: Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
  • Controls: Volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
  • Input Impedance: 20k ohms balanced, 10k ohms unbalanced
  • Maximum Input Level: +20dBU
  • Protection: Over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection
  • Indicator: Power on (blue) or standby/bypass (red)
  • Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable
  • Cabinet: Vinyl-laminated high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
  • Dimensions: 15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)
  • Shipping Weight: 54.6 lbs.; 24.75 kg
Weight 25.00 kg

Reviews

There are no reviews yet.

Be the first to review “M-AUDIO BX Subwoofer 10 inch 240W”

Your email address will not be published. Required fields are marked *

Quick Comparison

M-AUDIO BX Subwoofer 10 inch 240W removeGENELEC 5040B ACTIVE SUBWOOFER removeEVE AUDIO TS108 ACTIVE 8'' SUBWOOFER 150W RMS removeEVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removePRESONUS TEMBLOR T-8 Active subwoofer 100W removeGENELEC 7260A ACTIVE DSP SUBWOOFER remove
NameM-AUDIO BX Subwoofer 10 inch 240W removeGENELEC 5040B ACTIVE SUBWOOFER removeEVE AUDIO TS108 ACTIVE 8'' SUBWOOFER 150W RMS removeEVE AUDIO TS110 ACTIVE 10'' SUBWOOFER 250W RMS removePRESONUS TEMBLOR T-8 Active subwoofer 100W removeGENELEC 7260A ACTIVE DSP SUBWOOFER remove
Image
SKUBX Subwoofer5040BTS108TS110Temblor T-87260A
Rating
Price 340.00 incl. GR VAT 480.87 incl. GR VAT 699.00 incl. GR VAT 895.00 incl. GR VAT 331.07 incl. GR VAT 2,225.94 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentFeatures
  • 10” long-excursion low-frequency driver with oversized magnet
  • 240-watt Class A/B amplifier with all-discrete transistor design
  • Stereo inputs: XLR; 1/4" balanced/unbalanced; RCA
  • Stereo satellite outputs: XLR; 1/4" balanced/unbalanced
  • Internal crossover offers variable frequency
  • Included subwoofer bypass footswitch
  • High-density bass reflex cabinet with internal bracing
  • Removable grill and detachable feet
  • 180 phase reverse switch
Specifications
  • Type: Bass-reflex active powered subwoofer
  • Woofer Driver: 10-inch composite (treated paper/fiberglass) cone with high-temperature voice coil and damped rubber surround
  • Frequency Response: 20-200Hz (-3dB)
  • Crossover: HP/LP linked filter sweepable from 50-200Hz; 24dB/octave 4th-order alignment
  • Input Sensitivity: 80mV pink noise input produces 100dBA output SPL at one meter with vol
  • Adjustable Gain: (-30dB to +6dB)
  • Amplifier: 240 watts average power into 4, discrete transistor design
  • Signal-To-Noise Ratio: 96dB (A-weighted)
  • THD at Rated Power, Mono Mode: 0.019%
  • Inputs: Two XLR balanced/unbalanced inputs; two TRS balanced/unbalanced inputs; two unbalanced RCA
  • Outputs: Two XLR balanced/unbalanced outputs for satellites; two TRS balanced/unbalanced outputs for satellites
  • Controls: Volume/gain control, phase inverse switch, variable crossover control, subwoofer bypass footswitch jack
  • Input Impedance: 20k ohms balanced, 10k ohms unbalanced
  • Maximum Input Level: +20dBU
  • Protection: Over temperature, turn-on/off transient, subsonic filter, external mains fuse, DC protection, over current protection
  • Indicator: Power on (blue) or standby/bypass (red)
  • Power Requirements: Dual-voltage (selectable by rear-panel switch) for either 100-120V/~50/60Hz or 220-240V/~50/60Hz; powered via detachable grounded IEC cable
  • Cabinet: Vinyl-laminated high-density internally braced 3/4” MDF cabinet with 1” front and back baffles
  • Dimensions: 15.5 in. (h) x 13 in. (w) x 17.25 in. (d); 39.4 cm (h) x 33 cm (w) x 43.8 cm (d)
  • Shipping Weight: 54.6 lbs.; 24.75 kg

The Genelec 5040B is an extremely compact active subwoofer designed to complement up to five 6010B's with accurate and dynamic bass response reaching down to 35 Hz. Matched perfectly with the 6010B's, the 5040B conveniently features a remote volume control allowing adjustment of the entire sound system as well as versatile acoustic controls for perfect room integration.

Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.

ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.

Designed by Genelec's R&D team in co-operation with internationally acclaimed Finnish designer Harri Koskinen, the 5040B subwoofer features an unobtrusive, modern appearance.

The 5040B features a magnetically shielded downward firing 6 1/2" bass driver attached to a die-cast aluminium base plate.

The base plate also serves as the chassis for the 40 Watt amplifier and crossover filter circuitry. The 5040B packs a respectable punch of 98 dB maximum sound pressure level

98 dB
Main 35 - 85 Hz (± 3 dB)
LFE 35 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
6.5" Active
40 W
H x D 251 x 305 mm
6.3 Kg (13.9 lb)
5.1 RCA analog in
1 x 3.5 mm stereo jack in
5 x RCA analog out

 

8" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS108 model features a very efficient 150W PWM amplifier that drives a proprietary 8" woofer. This guarantees a frequency response of down to 33Hz (on the lower end), up to 300Hz, for a maximum output power of 105 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS108
Description Subwoofer
Dimensions (WxHxD) [mm] 280 x 415 x 365
Dimensions (WxHxD) [“] 11.02 x 16.34 x 14.37
Free-field frequency range (-3dB) 33Hz - 300Hz
Woofer 195mm/8“
Maximum SPL @ 1m 105dB
Number of amplifiers 1
Total short-term output power 150W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 170VA
Misc.
Weight kg/lb. 11.5 / 25.3

10" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10" woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

 

Product TS110
Description Subwoofer
Dimensions (WxHxD) [mm] 330 x 485 x 430
Dimensions (WxHxD) [“] 12.99 x 19.09 x 16.93
Free-field frequency range (-3dB) 28Hz - 300Hz
Woofer 250mm/10“
Maximum SPL @ 1m 108dB
Number of amplifiers 1
Total short-term output power 250W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 250VA
Misc.
Weight kg/lb. 19.6 / 43.2

The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.

The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.

8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement  Technical Specifications
Inputs 2x Balanced 1/4" TRS
2x Unbalanced RCA
Outputs 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option)
Frequency Response 30 Hz - 200 Hz
Low Pass Filter 50 - 130 Hz (variable)
Signal to Noise Ratio >98 dB (A weighted)
THD 0.05%
Amplifier Power 200 W peak, 100 W RMS
Power Consumption 120 W
Amplifier Type Class AB
Max Peak SPL 104 dB at 1 m
Woofer 8" glass-composite, downward-firing
Port Rear-firing bass reflex (round)
Input Gain Adjustment -30 to +6 dB
Polarity Reverse 0 or 180°
Low Pass Filter 50 Hz to 130 Hz
High Pass Filter On/off
Protection RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

 

Power 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Cabinet Vinyl-laminated MDF
Dimensions 10.2 x 12.6 x 11.0" (260 x 320 280 mm)
Weight

21.2 lb (9.6 kg)

     

Genelec 7260A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.

With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7260A adapts to all low frequency monitoring situations. The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50-100 Hz.The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.

The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7260A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.

The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.

This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.

 

108 dB
Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
10“
120 W
H x W x D  527 x 462 x 363 mm
27 Kg (59 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

Weight25.00 kg7.00 kg11.50 kg19.60 kg19.00 kg27.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 25.00 kg
Weight 7.00 kg
Weight 11.50 kg
Weight 19.60 kg
Weight 19.00 kg
Weight 27.00 kg