| Content | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
The SRH440 Professional Studio Headphones from Shure provide exceptional sound reproduction and comfort.
Optimized for home and studio recording, SRH440 headphones reproduce accurate audio across an extended range.
Impedance, power handling and sensitivity are all calibrated for professional audio devices such as DJ mixers, mixing consoles, and headphone amplifier. Includes carrying bag and threaded 1/4" (6.3mm) gold plated adapter.
Enhanced frequency response delivers accurate audio across an extended range
Impedance and power handling optimized for perfomance with professional audio devices
Adjustable headband and collapsible construction provide comfort and portability
Bayonet clip securely locks detachable cable into ear cup
Sensitivity
105 dB
Maximum Input Power
500 mW
Frequency Response
10 Hz - 22 kHz
Weight
9.6 oz (272 g)
Cable Length
3 meters (9.84 ft)
Cable Style
Detachable coiled oxygen-free copper
Plug
Gold-plated 1/8" (3.5 mm) stereo mini jack
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
| DT770 Closed reference headphone for control and monitoring applications (optionally with limiter).
The DT 770 PRO is a closed dynamic headphone and has been designed for critical music and sound monitoring. The single sided cable makes the handling of the headphone easy. The cushion system allows the DT 770 PRO to be used comfortably for long periods of time.
▲ Closed, diffuse-field studio headphone
▲ "Bass reflex" technology for improved bass response
▲ Comfortable fit due to rugged, adjustable, soft padded headband construction
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Single-sided cable
▲ NEW - Limiter (Optional)
▲ Velour, circumaural ear pads
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
250 ohms |
| Headphone frequency response |
|
5 - 35.000 Hz |
| Nominal sound pressure level |
|
96 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Coiled connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
270 g |
| 80 Ohm specs
- Type Over-ear (Closed)
- Channels Stereo
- Noise isolation 18 dB reduction
- Connections 3.5mm stereo, 6.25mm stereo
- Weight 9.52 oz
General
- Type Over-ear (Closed)
- Cable type Y-cable
- Channels Stereo
Other features
- Plug type Straight
- Gold-plated connector Yes
Audio quality
Noise reduction
- Noise isolation 18 dB reduction
Connections
- Connections 3.5mm stereo, 6.25mm stereo
|
Reviews
There are no reviews yet.